[Feeler] GTM Stage 1.5 Supercharger Kit

AntiVenom

I recently got in to an accident with my Z and early indications are that it´s totaled.

If it does get totaled, my current plan is to go buy a new Nismo as soon as I cash out. Since it will be new and under warranty I won't be looking to go forced induction any time soon. The reason this is a feeler is because I am not 100% sure about it an may get a used Z and go beast mode on it right off the bat. However, I prefer to sell it and put the money towards the new Z.

The kit has about 2K miles on it. Check out my build thread and you will see it was installed only a few weeks back. It made a trip to Maryland to be tuned, and a trip out to ZdayZ. The kit made 423whp on my car, with an undiscovered boost leak. My plan was to go back to AAM to have it retuned after ZdayZ.

The kit is complete with the exception of the 255lph pump and the bracket for the S/C cooler. Kit used to go for $7500 or so. I am looking to get $5k shipped+paypal fees.

Kit includes:
Below is a description of all the components of the Stage 1.5 kit :
-Uprev Cable and License.
-Rotrex C38 supercharger
-GTM compressor housing
-GTM Supercharger Billet aluminum brackets
-GTM billet aluminum Sc pulley
-GTM supercharger cooler kit
-Rotrex Supercharger Traction fluid
-4-Ply High Resistance Nomex Silicon couplers
-Stainless Steel T-Bolt clamps
-2.5 x 10 x 24 Bar and Plate Core Intercooler Rated @ 700hp
-Polished aluminum IC Piping
-3” MAF housing
-GTM Oil Filter Relocation Kit
-4.5” diameter Air Intake System
-Turbosmart Bypass Valve
-Pre-made steel braided oil and P.S Supply & Return lines
-All Necessary Hardware and Installation Instructions
-GTM Basic fuel system with Bosch EV-14 650CC Injectors
-GTM Fuel Pump Voltage Stabilizer Kit
-GTM Custom Drive belt By Bando
-GTM Heavy duty Belt idlers

Let me know.

Cheers!

__________________

SR_GUY

damn you! why didnt you post this up sooner lol

AntiVenom

This is a dyno sheet from another member Baer383. HP expectations for this kit should be in the 500+whp range. I had several small boost leaks when I had mine on the dyno and that limited me to 7.5-8psi. So I have no doubt it was getting closer to this HP after fixing them, it as a noticeable gain in power, but never got a chance to get her back on the dyno.

__________________

brancky3

How would one go about getting another bracket for the cooler, or is it pretty easy to fab up?

__________________

AntiVenom

you could attempt to contact gamma. i've had mixed results with them. mostly it's hard to get a hold of them period. they are generally helpful once you get them though.

the bracket itself should be easy to make. it is basically a flat plat plate. if you are handy with fabbing should be a doable or any shop would be able to make one for you.

edit: i uploaded the manual to my dropbox. you can see the bracket on page 78. Stage 1.5 Installation Manual

__________________

pokeyl

Bracket is easy to fab.

__________________
It's not my fault I'm old, I was born a very long time ago!

Devil34

bump for good deal imo

__________________
When I find myself in times of trouble...my fairlady is always there for me

Joshmoe17

Send me some pics if you could 507-273-2035

DeliriousClam

I'd love this so much

__________________
Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet
MECP Advanced: CEA26671
Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

pokeyl

If your buyer needs the base tune I can help with that!

__________________
It's not my fault I'm old, I was born a very long time ago!

AntiVenom

That's a great offer. Thanks for the assist.

__________________

DeliriousClam

You wouldn't be willing to donate this to my poor *** would you?


<3

__________________
Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet
MECP Advanced: CEA26671
Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

eliboy

Can you please PM me your phone number?


Sent from my iPhone using Tapatalk

fairlady_z34

I just hate lazy buyers, can't even pm seller, if u r serious about it, instead of asking him to contact u, just pm him. Almost seems like years ago when I was on the zilvia forums when I used to see this all the time.

eliboy

I did pm him. I just posted here also in case he will not see the pm. Who need the facts when you are a know it all.