Zele Front Bumper, CF Lip, Skirts and Amuse Rear

Mozen · 01-18-2016, 05:23 PM

Quote:

Originally Posted by cooltoy

For both bumpers?

That's ~$300 US for his. And probably $400 Can for yours. You can get a brand new one from Shine Auto and have it installed and painted for about the same.

That is why he wants to stay local.

Exactly! Hood is pending for a local swap. All else is still For Sale. I took a lot of stuff off over the weekend and ill start to clean it up and organize it tomorrow.

carvalho360 · 01-17-2016, 02:38 PM

Am i misreading or are you actually looking to swap the amuse replica for stock... Cause i have stock and you arent terribly far from philly.

Mozen · 01-17-2016, 04:00 PM

You are not misreading. I am looking to swap a 7/10 replica amuse rear for stock

Sent from my SM-G900F using Tapatalk

cooltoy · 01-17-2016, 04:50 PM

Who is the replica by? And why 7/10?

cooltoy · 01-18-2016, 08:01 PM

Quote:

Originally Posted by cooltoy

Who is the replica by? And why 7/10?

?

Mozen · 01-18-2016, 08:18 PM

Sorry missed that question. Replica is by UAM/Shine Auto. Its 7/10 because it has a small crack on the back right corner at the bottom. Not noticeable unless you crouch down and take a look. I can clean it up and patch it if someone wants the bumper and wants to repaint. I spent a lot of time reinforcing the bumper when i got it from Shine auto and its a great fit but it is damaged so its free for swap. If i cant find a buyer ill fix the corner myself and sell with the car.

cooltoy · 01-18-2016, 10:46 PM

No problem. Thanks for the answer.

I don't want to detract from your thread, (maybe yo u can PM me) but what exactly did you do to reinforce the bumper. I have one waiting to be painted and installed.

Mozen · 01-19-2016, 04:25 AM

No issues. The bumper is so thin compared with my authentic zele so I sanded the inside surface and added a a few small panels of fiberglass using a poly resin that will flex a bit more than the boat resins I normally use. This stiffens up the bumper in areas that you might lean on for example if you were pulling stuff out of the back of the car. I'll find pics.

Sent from my SM-G900F using Tapatalk

cooltoy · 01-19-2016, 09:22 AM

That would be great. Thank you.

01-17-2016, 02:38 PM	#2 (permalink)
carvalho360 Base Member Join Date: Jul 2010 Location: Philadelphia Posts: 114 Drives: 09 370z black Rep Power: 15	Am i misreading or are you actually looking to swap the amuse replica for stock... Cause i have stock and you arent terribly far from philly. __________________ Reconstructed salvage. 2009 silver turned black 370z. Rims + handles blacked out, 15% tints, fast intentions catback exhaust, stillen gen 3 cai and much more soon to come.

01-17-2016, 04:00 PM	#3 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 18	You are not misreading. I am looking to swap a 7/10 replica amuse rear for stock Sent from my SM-G900F using Tapatalk __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE

01-17-2016, 04:50 PM	#4 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,993 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Who is the replica by? And why 7/10? __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

01-18-2016, 08:18 PM	#6 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 18	Sorry missed that question. Replica is by UAM/Shine Auto. Its 7/10 because it has a small crack on the back right corner at the bottom. Not noticeable unless you crouch down and take a look. I can clean it up and patch it if someone wants the bumper and wants to repaint. I spent a lot of time reinforcing the bumper when i got it from Shine auto and its a great fit but it is damaged so its free for swap. If i cant find a buyer ill fix the corner myself and sell with the car. __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE

01-18-2016, 10:46 PM	#7 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,993 Drives: 14 PW 370Z S/T MT Rep Power: 243722	No problem. Thanks for the answer. I don't want to detract from your thread, (maybe yo u can PM me) but what exactly did you do to reinforce the bumper. I have one waiting to be painted and installed. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

01-19-2016, 04:25 AM	#8 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 18	No issues. The bumper is so thin compared with my authentic zele so I sanded the inside surface and added a a few small panels of fiberglass using a poly resin that will flex a bit more than the boat resins I normally use. This stiffens up the bumper in areas that you might lean on for example if you were pulling stuff out of the back of the car. I'll find pics. Sent from my SM-G900F using Tapatalk cooltoy likes this. __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE

01-19-2016, 09:22 AM	#9 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,993 Drives: 14 PW 370Z S/T MT Rep Power: 243722	That would be great. Thank you. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zele Style AeroKit - Front/Rear Bumpers, Side Skirts, Front Lip!	Fly1 Motorsports	Body Interior/Exterior	189	10-13-2018 12:28 AM
[FOR SALE] 2010 Mag Black Front Bumper/ Rear Bumper/ Side skirts	makstraw	Parts for sale (Private Classifieds)	17	10-01-2014 01:09 PM
Zele Front and Amuse Rear?	Larzon	Exterior & Interior	11	02-26-2013 10:57 PM
possibility of fabricating amuse rear bumper to fit Zele exhaust	zuperman 370	Exterior & Interior	6	04-02-2012 11:04 AM
[FOR SALE] SOCAL: OEM PW Front Bumper/Rear Bumper/Side Skirts/Fenders	Fly1 Motorsports	Parts for sale (Private Classifieds)	11	02-03-2012 06:17 PM