370z Diff/pumpkin 4.08 gears, Quaife LSD, Whiteline Bushings COMPLETELY ASSEMBLED

Carbon_z · 05-21-2015, 12:36 PM

370z Diff/pumpkin 4.08 gears, Quaife LSD, Whiteline Bushings ASSEMBLED
$1,950

Fully Assembled and Ready to swap Modified 370z Pumpkin. Has less than 500 miles and assembled by Z1 Motorsports.
Gears $550
New seals/pinion $250
Quaife $1098
Motul Diff Fluid $40
Labor Z1 6.5 hrs@108/hr= $702.00
Whiteline bushings $100.00
Total cost $2,740.00

Your price with or without bushing (depending on removal process) $1,950.00 plus core swap ($400 refundable once received).

This setup completely changed the way the Z handled and I absolutely LOVED IT. With the additional power I am planning on putting down, the high gearing wont work. This will improve your 0-60 times, quarter mile times, handling, power distribution. It was the most noticeable modification I made on the car where I realized the car drove and handled 100x's better. Never had the opportunity to track or drive it aggressively because the car was in Las Vegas but it was a pleasure to drive for the few hundred miles I put on it.

***Picture for attention

edconline · 05-21-2015, 12:46 PM

Ugh!!!! I need this exactly, but with 3.9 gears. Damnit!!! Been waiting FOREVER for one that was assembled with Qualife to come up, and it had to be 4.08 :'(
Amazing deal with all the work done, GLWS!

Sent from my 6+

scope22 · 05-21-2015, 01:51 PM

Does it affect Rev matching?

Riptide67 · 05-21-2015, 01:58 PM

If this is available after I sell my FI exhaust this weekend, I may scoop this from you Moses

Carbon_z · 05-21-2015, 02:27 PM

I believe the rev match will still work however it will change in regards to rpm shift points. I did not have rev match in my 370z (base) so didnt have to deal with it.

DR_ · 05-21-2015, 02:43 PM

Quote:

Originally Posted by scope22

Does it affect Rev matching?

Yes, it will throw an error and stop working at higher speeds.

DR_ · 05-21-2015, 02:45 PM

Want to swap with my stock 3.69 w/ Quaife differential?

Carbon_z · 05-21-2015, 02:47 PM

from what I read from other memebers nothing bad happens.. Just changes the shift points on the rpms reading. So if your car shifted at 2300 it would shift a little higher with the new gears. This is what I read on the forums.

DEpointfive0 · 05-21-2015, 05:06 PM

Quote:

Originally Posted by DR_

Want to swap with my stock 3.69 w/ Quaife differential?

Let's 3 way swap, lol
I'll take the 3.69s

Japanjay · 05-21-2015, 11:33 PM

Quote:

Originally Posted by DR_

Yes, it will throw an error and stop working at higher speeds.

From what I have read as well. Works fine on the street, but at very high rpms on the track it doesn't respond well and throws error codes.

V8Killer · 05-23-2015, 07:22 AM

Is your car currently at Z1? I ask as they have my car at the moment already. Not sure if I am interested on the 4.08's but on the quaife I am. I won't be needing the bushings either. How much power are you putting down right now where you feel that you no longer want the 4.08s?

Carbon_z · 05-27-2015, 12:17 PM

The car is at the body shop and engine is at performance shop. I am finishing up on a 1000+rwhp build so the gears are a no-no lol. I had 450 rwhp with them and it was great!@

Z eliminator · 05-28-2015, 10:15 AM

will PM you later this evening

Z

Carbon_z · 05-28-2015, 02:11 PM

okay thanks. Still available and found out that if you have the new racerom phase 2 ECUTEK tuning software, synro rev match wont be an issue

edconline · 05-28-2015, 05:15 PM

Quote:

Originally Posted by Carbon_z

okay thanks. Still available and found out that if you have the new racerom phase 2 ECUTEK tuning software, synro rev match wont be an issue

Very intriguing.. it looks like that is part of the list of features that has yet to be released though, no? I hadn't heard that they offered that yet, or the VVEL control, etc?

05-21-2015, 12:46 PM	#2 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	Ugh!!!! I need this exactly, but with 3.9 gears. Damnit!!! Been waiting FOREVER for one that was assembled with Qualife to come up, and it had to be 4.08 :'( Amazing deal with all the work done, GLWS! Sent from my 6+ Carbon_z likes this. __________________ View Journal Audio Build

05-21-2015, 01:51 PM	#3 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	Does it affect Rev matching? Carbon_z likes this.

05-21-2015, 01:58 PM	#4 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	If this is available after I sell my FI exhaust this weekend, I may scoop this from you Moses Carbon_z likes this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

05-21-2015, 02:27 PM	#5 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	I believe the rev match will still work however it will change in regards to rpm shift points. I did not have rev match in my 370z (base) so didnt have to deal with it. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

05-21-2015, 02:45 PM	#7 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 17	Want to swap with my stock 3.69 w/ Quaife differential? DEpointfive0 likes this. Last edited by DR_; 05-21-2015 at 02:47 PM.

05-21-2015, 02:47 PM	#8 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	from what I read from other memebers nothing bad happens.. Just changes the shift points on the rpms reading. So if your car shifted at 2300 it would shift a little higher with the new gears. This is what I read on the forums. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

05-23-2015, 07:22 AM	#11 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Is your car currently at Z1? I ask as they have my car at the moment already. Not sure if I am interested on the 4.08's but on the quaife I am. I won't be needing the bushings either. How much power are you putting down right now where you feel that you no longer want the 4.08s? Carbon_z likes this. __________________ "Punch" Too much to list and a baby shot of nitrous....

05-27-2015, 12:17 PM	#12 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	The car is at the body shop and engine is at performance shop. I am finishing up on a 1000+rwhp build so the gears are a no-no lol. I had 450 rwhp with them and it was great!@ edconline likes this. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

05-28-2015, 10:15 AM	#13 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	will PM you later this evening Z Carbon_z likes this. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

05-28-2015, 02:11 PM	#14 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	okay thanks. Still available and found out that if you have the new racerom phase 2 ECUTEK tuning software, synro rev match wont be an issue edconline and AntiVenom like this. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Whiteline Poly Diff Bushings	elliotty	Parts for sale (Private Classifieds)	2	07-08-2014 12:10 PM
SPL diff bushings and whiteline diff bushings??	synolimit	Engine & Drivetrain	7	01-12-2014 01:24 AM
[FOR SALE] Fresh Pumpkin/Diff • VLSD • 4.08 gears	SharpByCoop	Parts for sale (Private Classifieds)	6	12-25-2013 09:33 AM
Whiteline Diff Bushings Question	cdoxp800	Engine & Drivetrain	15	09-04-2013 05:22 AM
[FOR SALE] VLSD Pumpkin/diff with 4.08 Gears installed	esfourteen	Parts for sale (Private Classifieds)	13	09-07-2012 06:17 PM