2016 Infiniti q60 coupe

Originally Posted by squid267

My bad, I saw the post before that one. That's correct about the Q60. I was referring to Q50 for winter release.

Originally Posted by RicerX

The Q50 AWD is heavier, especially if it's equipped with the spare tire package.

The one to watch for would be the RWD without the spare tire. There's about a 200-250lb difference between the two. It's noticeable - I've driven both and own the current 3.7 RWD Q50S without the spare tire package.

If he's getting 4.8s to 60 on an AWD Red Sport with four people in the car... that's going to be a quick *** car in RWD form with only a driver inside.

Originally Posted by F.I. Inc.

Yes, they are Tony approved! Frank, when I get around to it, I may put your pipes into production. We will call them, "The FP" option.
-Tony

Originally Posted by FPenvy

cutting down some fat on the body, interior, and no AWD I would assume (hope) that if the Q50/60 specs claim a 4.5 0-60 that the Z may even touch a magical 4.0 0-60. however in reality with RWD and that much HP without a launch control of sorts it'll be roughly the same maybe like you said 4.3

fingers crossed.

Originally Posted by Sinecure

We have training today on the new 2016 Q50. The trainer should be bringing an AWD Red Sport (twin turbo 400hp). What do you want to know? What should I take pictures of?

You've got three hours to post your questions here. I'll check the forum before the training starts.

Originally Posted by Sinecure

I took a video of the exhaust, but the audio doesn't sound much like the real life sound.

Some interesting notes about exhaust sound. First, I was told it would sound like the coupe. It doesn't. It is less throaty and a bit more high pitched. But I really enjoyed the sound in-cabin. Also, I believe most of the 6 cylinder cars will have Active Noise Control. This one did. It was clear that they turn down the ANC when you put it in Sport/Sport+ mode. So you get more engine noise in the cabin vs. standard mode. This is a good thing. Also, it is NOT artificial engine noise a la BMW. This is real engine noise, it is just that the noise cancellation isn't turned up as high and doesn't cancel out the noise like it does in standard mode.

Some random notes:

Steering wheel hasn't changed, although the material (leather) is slightly different).

10K service interval with synthetic oil.

The torque curve is nearly flat from 1500-6500rpms.

It has the same tranny, but the shift logic has been updated. Faster shifts and a bit more aggressive in sport mode. My current hybrid is not sport, so I don't have paddles. I tried paddle shifting, but I need to practice that to be able to tell you if it is different from the 14-15 models.

Sport vs. Sport+: The main difference is that in Sport+, the DAS steering is tuned to give you more feedback in the steering wheel. This is one of the big differences in the 2.0 version of DAS. It is definitely more natural feeling and better. I liked DAS before for what it enabled (ALC). But the new car definitely feels better in terms of steering. Non-DAS cars will now have Electronic Power Steering (2.0t will have hydraulic steering). Even the EPS apparently can change ratios/assist in sport mode.

The suspension, even in Sport+ mode, feels better and less harsh than the old sport/hybrid suspension. Also, putting it in the softer suspension smooths out the bumps on a crappy road. Even in standard mode, the suspension can adjust a little by itself.

A couple other little things I learned:

The reason the car always starts up on "Standard" mode and won't remember your preferred, or last settings - thank the EPA. By rule, any car with electronic drive mode has to start up in the mode that it was tested in by the EPA.

The general consensus seems to be that the Red Sport version will probably be the most tune-able.



I loved the acceleration. And we had 3 adults plus a trunk full of stuff. Boss drove it solo and really, really loved it. You will smile when you press the accelerator.

Originally Posted by Sinecure

Acceleration felt much smoother and "linear" if that's the right word. Same with braking.

Can't tell you on tires. First, my stock tires are the 17" RFT's and second, the tires I'm running right now are 18" Blizzak non-RFT's. Plus, hard to tell when you change up all the suspension stuff.


I suspect earlier versions could get the DAS changes, but I heard nothing about plans to make that happen.

Originally Posted by F.I. Inc.

Yes, they are Tony approved! Frank, when I get around to it, I may put your pipes into production. We will call them, "The FP" option.
-Tony

Originally Posted by Firebase99

"I loved the acceleration. And we had 3 adults plus a trunk full of stuff. Boss drove it solo and really, really loved it. You will smile when you press the accelerator."

If thats really the case....whoa. Thats an EASY 400 pounds dead weight. 4.2 solo? New Z 3.9 to 4? Am I dreaming? Wait I said new Z...ROFL!!!

Originally Posted by F.I. Inc.

Yes, they are Tony approved! Frank, when I get around to it, I may put your pipes into production. We will call them, "The FP" option.
-Tony

Originally Posted by Sinecure

Engine uncovered. The dual aluminum things are intercoolers. Interestingly, perhaps unsurprisingly to those better informed than I, they don't get hot when you run the engine.

Originally Posted by FPenvy

same dude from youtube video I was talking to.

where were these?

Originally Posted by F.I. Inc.

Yes, they are Tony approved! Frank, when I get around to it, I may put your pipes into production. We will call them, "The FP" option.
-Tony

Originally Posted by F.I. Inc.

Yes, they are Tony approved! Frank, when I get around to it, I may put your pipes into production. We will call them, "The FP" option.
-Tony

Originally Posted by FPenvy

also that intake manifold needs changed. cant wait for aftermarket to change that for optimized flow.

Originally Posted by theDreamer

Hose kits are going to be like 1k by the looks of it, so many hoses going everywhere!!!!

Originally Posted by F.I. Inc.

Yes, they are Tony approved! Frank, when I get around to it, I may put your pipes into production. We will call them, "The FP" option.
-Tony

Originally Posted by FPenvy

hose kit? that's your concern? lol

Originally Posted by FPenvy

hose kit? that's your concern? lol

Originally Posted by theDreamer

Hey man, have to have some color in that engine bay with the new intake manifold, cannot just do black hoses everywhere. That is soooo 2000.

Originally Posted by theDreamer

Plus I won't be investing in the new Z, just dropped more money on my Z this week so no care really.
I just hope the Z continues as something other than a FRS clone.

Originally Posted by F.I. Inc.

Yes, they are Tony approved! Frank, when I get around to it, I may put your pipes into production. We will call them, "The FP" option.
-Tony