2016 Mustang GT350

m4a1mustang · 11-18-2014, 09:59 AM

Quote:

Originally Posted by FPenvy

is this a serious question?

Since Mustangs are for gays we should get his & his editions.

FPenvy · 11-18-2014, 10:05 AM

Quote:

Originally Posted by m4a1mustang

Since Mustangs are for gays we should get his & his editions.

you buying? lol

Firebase99 · 11-18-2014, 10:30 AM

This will be cheaper than an M4, right at $60K I bet.

UNKNOWN_370 · 11-18-2014, 05:47 PM

Quote:

Originally Posted by Cell

How about with sound?

The ONLY thing that draws me to stang, is that illmatic exhaust note.

I was expecting more from the final design n thought the car was losing 400lbs, not gaining 20lb. But this Shelby should be a winner like the Boss302 was. Good **** Ford.

m4a1mustang · 11-18-2014, 06:52 PM

Quote:

Mustang6G.com Q&A with Jamal Hameedi on the new Shelby GT350 Mustang

PRODUCTION:

Q: Do you expect it to be a limited production?
A: It will be about the same as a GT500.

Q: Will there be as many built as customers want?
A: …Up to a point.

WEIGHT:

Q: Is the GT350 lighter than the base GT?
A: Yea, we’re not really talking curb weight today, but there was a lot of light-weighting. Much of it went to offset all the mass that we added in terms of power, brakes, etc., but we also went beyond that too.

Q: So you’re optimistic that…
A: Yea, I’m not going to tell you. [laughs]

ENGINE:

Q: Is it dry sump?
A: It’s not dry sump.

Q: Is it direct injection?
A: No.

Q: Where do you get the extra 0.2 liter displacement
A: It’s all bore. It’s got plasma sprayed bore lining. Same lining coating as the 2013 GT500.

Q: Better breathing with flat planes?
A: It’s the rotational inertia that it reduces and also from an exhaust standpoint because you’re going side to side, you’re never disturbing the next cylinder’s firing.

Q: And mass reduction on the crank right?
A: Right.

Q: Where is the crank made?
A. It’s mostly in-house.

Q: You guys forge the crank and machine it yourselves?
A: Yea, there’s bits that are forged…

Q: This is a pretty big motor for a flat plane crank (big displacement). What have you done in terms of crankshaft damping?
A: There’s almost 30 things we did (outside the block) to compensate for it. It’s going to be a whole other story on how we did that.

Q: Challenges with emissions compliance with a flat plane crank?
A: It was harder than usual.

Q: Tell us about the variable loading exhaust valve?
A: It’s got an electric valve. So the valve, depending on what driver mode you’re in, the valve will either be open all the time (track mode) or it will open under certain conditions.

Q: Is it dependent on RPM or back pressure?
A: It’s electronically controlled so there’s algorithms in there that turn valve on in the right point in time.

Q: How much were you able to share with the 5.0L?
A: There are little common parts (i.e. things in the valve train), but it’s pretty much an all-new engine: new heads, new casting, new intake, new crank, new pistons, new rods, new halfshafts.

Q: There were rumors this engine was nicknamed Voodoo, is that the name it’s going by?
A: That was its nickname, yes.

Q: Any chance of seeing this engine in anything else?
A: Right now it’s just in this car. Which we’ve always done, just like the Trinity engine in the GT500. The GT500 was the only place you got the 5.8L.

Q: So it’s exclusive for now at least?
A: Yea.

Q: Is factory top speed software-limited?
A: No, it is drag-limited.

Q: How high does it go?
A: We’re not talking numbers today.

BENCHMARKS:

Q: What were your benchmarks for this car?
A: We had four cars that we bought. One was a 911 Carrera S — that was our main one. But we also bought a Ferrari California and that was mostly for NVH benchmarking. That’s the only flat plane crank front-engine car really out there. And then we bought a C7 corvette and also a Z28.

Q: Relative lap times compared to a Boss 302 around a race track?
A: Not really comparable. Way faster.. an order of magnitude faster.

SUSPENSION:

Q: What is the percentage of stiffness difference on the bushing between the GT350 and the standard GT?
A: Not that much. The bushings are different. The rate, the springs, the swaybars are different.

Q: Is the bushing changes primarily a handling thing or is it for NVH?
A: All for responsiveness and handling.

TRANSMISSION:

Q: Tell us a little about the transmission.
A: It’s a Tremec 3160 transmission that’s been modified fairly significantly to cope with the demands of the flat plane crank engine.

Q: What about the fly wheel and the clutch?
A: It’s got a low inertial dual mass flywheel and two 15-mm dual disc clutch.

WHEELS/BRAKES:

Q: Why black wheels?
A: Actually there’s a reason for that. The brake pads we use, they create so much dust and customers just hate it. You drive the car once with clean wheels and they are dirty after a short drive. So that’s why we got dark wheels.

Q: Why no carbon ceramic brakes?
A: I think you’ll find out later that affordability was a big part of this car.

Q: So keeping price down was a big part of that?
A: Yes. That was a priority with this car.

MISC:

Q: Is it meant to be a Boss 302 replacement or a GT500 replacement? Where is it positioned in the lineup?
A: It is its own beast. Just because the whole flat plane crank is so different than anything we’ve done and anything that’s out there.

Q: In terms of the body panels, how much does it share with the GT and how much of it is new?
A: From the A-pillar forward it’s all new. The whole rear diffuser is new. Rear quarter panels are the same.

Q: Will this be a platform for the GT500?
A: The car has got really good bones so…

Q: How much fun was it working on this?
A: It was awesome. I don’t want to stop.

Q: Why no carbon ceramic brakes?
A: I think you’ll find out later that affordability was a big part of this car.

Q: So keeping price down was a big part of that?
A: Yes. That was a priority with this car.

Seems like it is going to be priced really well.

Some of the test cars have been sporting carbon ceramics, so they will either be optional or come standard on a GT350R (or possibly GT500) variant.

Tadpole · 11-18-2014, 07:38 PM

Next question....Will it spank a GTR?

m4a1mustang · 11-18-2014, 07:39 PM

GTR is in its own little world.

Z-Girl 12 · 11-18-2014, 07:58 PM

Gorgeous piece of machinery

11-18-2014, 07:38 PM	#21 (permalink)
Tadpole A True Z Fanatic Join Date: Sep 2013 Location: Lockhart, TX Posts: 1,082 Drives: 13 Nissan 370Z A7 Rep Power: 18	Next question....Will it spank a GTR? __________________ Takeda TR3009P Short Ram Intakes, Custom Dual Exhaust, X-Piped with 18" Resonators & TopSpeed Axle Backs. EVO-R Led Third Foglight,

11-18-2014, 07:39 PM	#22 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	GTR is in its own little world. FPenvy likes this. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

11-18-2014, 07:58 PM	#23 (permalink)
Z-Girl 12 A True Z Fanatic Join Date: Apr 2012 Location: Florida Posts: 4,105 Drives: Spirited Rep Power: 11716	Gorgeous piece of machinery __________________ 2012 Z-SOLD 2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2016 3xx plan	TheBoomSpoon	Nissan 370Z General Discussions	40	03-16-2015 08:07 PM
2016 z	Elmo370z	Engine & Drivetrain	1	11-13-2014 11:27 AM
Shelby GT350 Convertible starting at 26k!!!!! OMG	Lacoste	The Lounge (Off Topic)	5	02-12-2011 09:57 PM
Prototype GT350, 0-60 in 3.7 seconds	Red370	Other Vehicles	22	09-27-2010 10:54 PM
Very Tempting - 2011 Shelby Mustang GT350	ZKindaGuy	Nissan 370Z General Discussions	66	02-12-2010 08:29 PM

11-18-2014, 10:30 AM	#18 (permalink)
Firebase99 A True Z Fanatic Join Date: Sep 2013 Location: fl Posts: 1,372 Drives: 14 3.8 Gen Coupe GT Rep Power: 14034	This will be cheaper than an M4, right at $60K I bet.