Ford replacing spark plugs:

frost · 08-08-2009, 06:42 PM

Ford wants to Replace Sparkplugs with Lasers

Since its humble beginnings in the 19th century, the sparkplug has been a mainstay of the combustion engine.

Some engineers at Ford, in collaboration with Liverpool University researchers have decided to modernize spark plug technology. Since we’re in the 21st century, that replacement is going to be lasers.

Yes, I said lasers.

Ford is currently testing a new laser ignition system for implementation on their high end cars in a few model years. This system is designed to increase the efficiency of the automotive ignition system. Since laser beams can be split into multiple beams, it would be possible for the laser ignition system to create multiple points of ignition.

Increasing the number of ignition points also enable the engine to start in cold and damp conditions, as well as providing for a more complete combustion of the fuel mixture, increasing fuel efficiencies.

Dr Tom Shenton, a researcher at Liverpool University leading the project, said:

“Lasers can be focused and split into multiple beams to give multiple ignition points, which means it can give a far better chance of ignition. This can really improve the performance of the engine when it is cold, as this is the time when around 80 per cent of the exhaust emissions are produced and the engine is at is least efficient.

“The laser also produces more stable combustion so you need to put less fuel into the cylinder.”

In the new laser ignition system, the car battery powers a laser which is directed into the engine cylinders by optical fibers and special lenses. Liverpool researchers claim that the laser will also require less power than traditional spark plugs, even though the laser system will need to fire more than 50 times per second to produce 3000 RPM.

The promise of significant fuel savings, as well as potentially developing alternative fuel mixes that would be ignitable thanks to this technology have sufficiently piqued the interest of the UK’s Carbon Trust for them to award this project a £200,000 grant.

GMZ · 08-08-2009, 06:52 PM

Quote:

Originally Posted by frost

Ford is currently testing a new laser ignition system for implementation on their high end cars in a few model years. This system is designed to increase the failure rate of the automotive ignition system. Since laser beams can be split into multiple beams, it would be possible for the laser ignition system to create multiple points of failure.

Fixed it for you

frost · 08-08-2009, 06:54 PM

Quote:

Originally Posted by GMZ

Fixed it for you

GMZ · 08-08-2009, 06:56 PM

Lolz, thats the first thing that came to my mind when I read that

JungleB · 08-08-2009, 10:04 PM

I would think this would require a rather high powered laser, the kind that'll blind a person. I'm not sure I'd be comfortable working around something like that.

The cost will also be rather high, but if they plan on using it in high end vehicles the extra couple thousand dollars won't be that big of a deal.

Also, I wonder how they plan on keeping the lense in the cyclinders clean? I would think carbon would coat it almost immediately, leaving it useless. Carbon ignites at nearly 1300F while gasoline ignotes at 536F, and probably lower when compressed in a cylinder. That means the carbon won't burn off and the lense will be fouled. It should also be pointed out that carbon burns around the same temp that steel melts.

Should be interesting to see how they pull this off. If they can, it'll be an incredible ignition system.

frost · 08-08-2009, 10:24 PM

Quote:

Originally Posted by JungleB

Also, I wonder how they plan on keeping the lense in the cyclinders clean? I would think carbon would coat it almost immediately, leaving it useless. Carbon ignites at nearly 1300F while gasoline ignotes at 536F, and probably lower when compressed in a cylinder. That means the carbon won't burn off and the lense will be fouled.

My girl and I were having this same discussion. We can't figure how it's a possibility either.

nogoodname · 08-08-2009, 10:43 PM

you know what they say about Ford's........lol

frost · 08-08-2009, 10:44 PM

Quote:

Originally Posted by nogoodname

you know what they say about Ford's........lol

they're the only american company that didn't need a bailout?

nogoodname · 08-08-2009, 10:50 PM

pictures may not be accurate....lol...but it did happen later on in the film, skyline engine in a mustang

nogoodname · 08-08-2009, 10:56 PM

it's the new trend

StLRedrider · 08-09-2009, 02:24 AM

Quote:

Originally Posted by nogoodname

you know what they say about Ford's........lol

come on now, be nice.

frost · 08-09-2009, 03:07 PM

I don't know if they will get it right, but kudos to them for having the balls to try it. Good job Ford, so says frost.

BMW Killa · 08-09-2009, 05:39 PM

Great, something else that will add more costs to already overly expensive vehicles. I'd say "they will only put it in their high class vehicles," but which exactly would those be?

m4a1mustang · 08-09-2009, 05:41 PM

Quote:

Originally Posted by BMW Killa

Great, something else that will add more costs to already overly expensive vehicles. I'd say "they will only put it in their high class vehicles," but which exactly would those be?

Probably some Lincoln models.

frost · 08-09-2009, 05:45 PM

Quote:

Originally Posted by m4a1mustang

Probably some Lincoln models.

I rode in a town car recently, I have to say, while it was comfortable to sit in, it sure looked generic. Very disappointing interior for a $46K car.

08-08-2009, 06:42 PM	#1 (permalink)
frost Retired admin Join Date: Dec 2008 Location: Winterfell Posts: 106,613 Drives: Your Wife Crazy Rep Power: 0	Ford replacing spark plugs: Ford wants to Replace Sparkplugs with Lasers Since its humble beginnings in the 19th century, the sparkplug has been a mainstay of the combustion engine. Some engineers at Ford, in collaboration with Liverpool University researchers have decided to modernize spark plug technology. Since we’re in the 21st century, that replacement is going to be lasers. Yes, I said lasers. Ford is currently testing a new laser ignition system for implementation on their high end cars in a few model years. This system is designed to increase the efficiency of the automotive ignition system. Since laser beams can be split into multiple beams, it would be possible for the laser ignition system to create multiple points of ignition. Increasing the number of ignition points also enable the engine to start in cold and damp conditions, as well as providing for a more complete combustion of the fuel mixture, increasing fuel efficiencies. Dr Tom Shenton, a researcher at Liverpool University leading the project, said: “Lasers can be focused and split into multiple beams to give multiple ignition points, which means it can give a far better chance of ignition. This can really improve the performance of the engine when it is cold, as this is the time when around 80 per cent of the exhaust emissions are produced and the engine is at is least efficient. “The laser also produces more stable combustion so you need to put less fuel into the cylinder.” In the new laser ignition system, the car battery powers a laser which is directed into the engine cylinders by optical fibers and special lenses. Liverpool researchers claim that the laser will also require less power than traditional spark plugs, even though the laser system will need to fire more than 50 times per second to produce 3000 RPM. The promise of significant fuel savings, as well as potentially developing alternative fuel mixes that would be ignitable thanks to this technology have sufficiently piqued the interest of the UK’s Carbon Trust for them to award this project a £200,000 grant.

08-08-2009, 06:56 PM	#4 (permalink)
GMZ Enthusiast Member Join Date: Jun 2009 Location: Virginia Beach Posts: 304 Drives: 07 V8 4Runner 4x4 Rep Power: 16	Lolz, thats the first thing that came to my mind when I read that __________________ Z-less once again

08-08-2009, 10:50 PM	#9 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1764	pictures may not be accurate....lol...but it did happen later on in the film, skyline engine in a mustang Last edited by nogoodname; 08-08-2009 at 10:55 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
help :replacing bulbs on headlight assembly	tru_Asiatik	Exterior & Interior	54	12-21-2010 03:33 AM
replacing the oem ds2 headlights with the 8000k	nappymike	Exterior & Interior	66	08-17-2010 02:19 AM
Woah! Ford Taurus SHO!!??	TheWeatherman	Other Vehicles	22	08-09-2009 07:49 PM
Replacing Stock Tires	Whitey#1	Wheels & Tires	1	08-07-2009 07:45 PM
Replacing the rear brakes	Brazilbro	Brakes & Suspension	2	05-30-2009 11:18 PM

08-08-2009, 10:04 PM	#5 (permalink)
JungleB Base Member Join Date: Jun 2009 Location: PA Posts: 76 Drives: 96 VW Passat GLX Rep Power: 16	I would think this would require a rather high powered laser, the kind that'll blind a person. I'm not sure I'd be comfortable working around something like that. The cost will also be rather high, but if they plan on using it in high end vehicles the extra couple thousand dollars won't be that big of a deal. Also, I wonder how they plan on keeping the lense in the cyclinders clean? I would think carbon would coat it almost immediately, leaving it useless. Carbon ignites at nearly 1300F while gasoline ignotes at 536F, and probably lower when compressed in a cylinder. That means the carbon won't burn off and the lense will be fouled. It should also be pointed out that carbon burns around the same temp that steel melts. Should be interesting to see how they pull this off. If they can, it'll be an incredible ignition system.

08-08-2009, 10:43 PM	#7 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1764	you know what they say about Ford's........lol

08-08-2009, 10:56 PM	#10 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1764	it's the new trend

08-09-2009, 03:07 PM	#12 (permalink)
frost Retired admin Join Date: Dec 2008 Location: Winterfell Posts: 106,613 Drives: Your Wife Crazy Rep Power: 0	I don't know if they will get it right, but kudos to them for having the balls to try it. Good job Ford, so says frost.

08-09-2009, 05:39 PM	#13 (permalink)
BMW Killa Enthusiast Member Join Date: Jan 2009 Location: FL Posts: 287 Drives: neezmo Rep Power: 188	Great, something else that will add more costs to already overly expensive vehicles. I'd say "they will only put it in their high class vehicles," but which exactly would those be?