Project Panda - My 2010 Taffeta White Honda Fit Sport Build

Waiz · 07-09-2014, 06:37 PM

Quote:

Originally Posted by kenchan

lol, i read this tread and got reminded i still haven't ground and touched up the 09's rear quarter arch at the bottom... lol

however i did change oil, air& cabin filters on my '12 and coolant change on my '09
during the 4th weekend. worked on my cars everyday that 4 day weekend.

I have been nursing a hamstring injury so I haven't touched either cars. I bought a new lip/diffuser rubber strip but haven't had a chance to install it

kenchan · 07-10-2014, 08:50 AM

Quote:

Originally Posted by Waizzz

I have been nursing a hamstring injury so I haven't touched either cars. I bought a new lip/diffuser rubber strip but haven't had a chance to install it

dohh... thats sucks, waizzz.

hope you get some mobility out of that leg soon. is that on your right leg or left? if left, then i suppose you can still
drive AT with your right, huh?

Waiz · 07-14-2014, 09:29 PM

Quote:

Originally Posted by kenchan

dohh... thats sucks, waizzz.

hope you get some mobility out of that leg soon. is that on your right leg or left? if left, then i suppose you can still
drive AT with your right, huh?

Man it's been over a week and I'm still hobbling

It hurts even to just sit down so I'm trying to gradually ease myself into driving more but standing up for awhile is painful so the Panda is filthly

kenchan · 07-15-2014, 10:52 AM

Quote:

Originally Posted by Waizzz

Man it's been over a week and I'm still hobbling

It hurts even to just sit down so I'm trying to gradually ease myself into driving more but standing up for awhile is painful so the Panda is filthly

that sucks... hope you get better real quick!

kenchan · 07-23-2014, 03:09 PM

how's that leg healing, waizzz?

Waiz · 07-26-2014, 02:48 PM

I'm almost better 1 more week and I should be 100% , got my computer fixed so I will have some install pics of my Apexi controller up soon

kenchan · 07-26-2014, 03:56 PM

Sounds good waizzz!

kenchan · 08-21-2014, 03:16 PM

waizz- wat wheel is this? do you know?

Waiz · 08-22-2014, 03:59 PM

Doing some work today on the Fit, will have updates tonight or tmrw

Ken, those might be a set of Konigs I'm not entirely sure

kenchan · 08-22-2014, 04:00 PM

Quote:

Originally Posted by Waizzz

Doing some work today on the Fit, will have updates tonight or tmrw

Ken, those might be a set of Konigs I'm not entirely sure

hey good to hear your back. your leg's cured now?

thanks, yah, im not sure wat that wheel is, but i like how it looks. will check konig's site. probably wont buy it though as it looks heavy.

kenchan · 08-22-2014, 04:08 PM

meh... found it.

did a search under bronze double 5 spoke 4x100 17" got this:

Ninja NJ01 Bronze 5-Spoke Split 17 inch Wheels | Rims | Tires

http://www.ninjawheels.com/specs.cfm?id=2956

WTF is a ninja wheel? lol

Waiz · 08-22-2014, 04:29 PM

Quote:

Originally Posted by kenchan

hey good to hear your back. your leg's cured now?

thanks, yah, im not sure wat that wheel is, but i like how it looks. will check konig's site. probably wont buy it though as it looks heavy.

Leg is still healing, calf is better but thigh needs more time to heal

I have been lagging on updating my blog and my threads with photos

Quote:

Originally Posted by kenchan

meh... found it.

did a search under bronze double 5 spoke 4x100 17" got this:

Ninja NJ01 Bronze 5-Spoke Split 17 inch Wheels | Rims | Tires

NJ01 Specs

WTF is a ninja wheel? lol

Good find, my friend just ordered the Konig Oversteer's for his TSX and these remind me of them.

I would personally not run a set of no-name wheels like that

Ninja's, really???

kenchan · 08-22-2014, 04:41 PM

Quote:

Originally Posted by Waizzz

Leg is still healing, calf is better but thigh needs more time to heal

I have been lagging on updating my blog and my threads with photos

Good find, my friend just ordered the Konig Oversteer's for his TSX and these remind me of them.

I would personally not run a set of no-name wheels like that

Ninja's, really???

ahh, still painful i see.

but making progress.

yah, i too cracked up at the name.

i would definitely NOT be running these for sure.

Waiz · 08-27-2014, 01:10 AM

Alright, here is the APEXi throttle controller install that I have been lagging on sharing!

Here is a photo of what you get with the kit (Control Unit, toggle switch, directions, and Throttle linkage)

The controller has 7 Setting Modes: (3 ECO Modes, 2 Boost Modes, Lo-Throttle Mode, and Hi-Throttle Mode).

I have spent significant time with the Eco modes and I now drive around with the most extreme Eco modes (for stop and go traffic) and the middle Eco modes for normal driving. Freeway merging or passing I drive around in the High-boost mode and it completely opens up the power of the car and removes any lag in throttle.

I removed the Fuse panel to determine what kind of installation I could work with and realized I had a good amount of space to mount the box

First thing I did was uninstall the OEM throttle and placed the APEXi cable between the two connections

As you can see there was quite a bit of extra wiring that I tucked behind the carpet to hide

I was then able to place the control box on an empty section of the panel (affixed with some double-sided tape)

I then focused my attention on how I was going to mount the controller switch, that is when I realized the fuse cover has a hole at the bottom which the cabling could run through

Then I remounted the Fuse cover and checked all my clearances

Success!

Matches the interior well

Final setup, works really well and is pretty subtle!

Huckleberry · 08-27-2014, 02:18 AM

Love your fit!

Purchased for my fiancé. Now I don't have to drive my Z when we go out!

2015 EX-L Nav

07-26-2014, 02:48 PM	#456 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	I'm almost better 1 more week and I should be 100% , got my computer fixed so I will have some install pics of my Apexi controller up soon kenchan likes this.

08-22-2014, 03:59 PM	#459 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	Doing some work today on the Fit, will have updates tonight or tmrw Ken, those might be a set of Konigs I'm not entirely sure kenchan likes this.

08-27-2014, 01:10 AM	#464 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	Alright, here is the APEXi throttle controller install that I have been lagging on sharing! Here is a photo of what you get with the kit (Control Unit, toggle switch, directions, and Throttle linkage) The controller has 7 Setting Modes: (3 ECO Modes, 2 Boost Modes, Lo-Throttle Mode, and Hi-Throttle Mode). I have spent significant time with the Eco modes and I now drive around with the most extreme Eco modes (for stop and go traffic) and the middle Eco modes for normal driving. Freeway merging or passing I drive around in the High-boost mode and it completely opens up the power of the car and removes any lag in throttle. I removed the Fuse panel to determine what kind of installation I could work with and realized I had a good amount of space to mount the box First thing I did was uninstall the OEM throttle and placed the APEXi cable between the two connections As you can see there was quite a bit of extra wiring that I tucked behind the carpet to hide I was then able to place the control box on an empty section of the panel (affixed with some double-sided tape) I then focused my attention on how I was going to mount the controller switch, that is when I realized the fuse cover has a hole at the bottom which the cabling could run through Then I remounted the Fuse cover and checked all my clearances Success! Matches the interior well Final setup, works really well and is pretty subtle! kenchan likes this. Last edited by Waiz; 08-27-2014 at 01:17 AM.

08-27-2014, 02:18 AM	#465 (permalink)
Huckleberry Enthusiast Member Join Date: Apr 2012 Location: Los Angeles Age: 39 Posts: 410 Drives: Z Rep Power: 13	Love your fit! Purchased for my fiancé. Now I don't have to drive my Z when we go out! 2015 EX-L Nav Waiz likes this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New owner of Project Panda 09 370z	2sl0w	New Forum Member	15	04-22-2013 08:32 PM
370Z For Sale 2010 Pearl White 370Z Sport Pkg.	Indy370Z	370Z For Sale	5	04-20-2013 05:10 PM
Project Panda, By Daisuke	daisuke149	Member's 370Z Gallery	176	12-08-2012 08:31 AM
Sell 2010 panda 7sp	Xsad	370Z For Sale	4	05-10-2012 09:57 PM
370Z For Sale 2010 White, Sport, 6spd - 24k - L.I. New York	wh1te370z	370Z For Sale	4	10-19-2011 09:34 AM

07-23-2014, 03:09 PM	#455 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	how's that leg healing, waizzz?

07-26-2014, 03:56 PM	#457 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Sounds good waizzz!

08-21-2014, 03:16 PM	#458 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	waizz- wat wheel is this? do you know?

08-22-2014, 04:08 PM	#461 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	meh... found it. did a search under bronze double 5 spoke 4x100 17" got this: Ninja NJ01 Bronze 5-Spoke Split 17 inch Wheels \| Rims \| Tires http://www.ninjawheels.com/specs.cfm?id=2956 WTF is a ninja wheel? lol