FRS/BRZ 11.3 @ 127 stock engine

red6spd

Fact is at less then 10 pounds people are running close to what that did. Awesome build and congrats for beating their own record but I'm tired of reading all the hate on this forum.

__________________
2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness.
???Whp ???WTQ (Will find out come spring time)

Red__Zed

Who is running close? Much less at less than ten pounds...

red6spd

You just posted the times on the previous page.

__________________
2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness.
???Whp ???WTQ (Will find out come spring time)

Red__Zed

Fastest 370z is .436 behind. At the end of the quarter mile, that's about 80 feet away from the Subaru.


I also hope you know that psi isn't comparable between single turbo and twins(or different compressor sizes). CFM is what you need to compare.

red6spd

Listen I don't care all I was saying is I'm tired of the Z hating. A shop with unlimited resources build a car that's probably going to burst into flames soon because of the amount of boost they put in it but they don't care because its a shop and when it blows they can just build another. The Z's you listed are real normal people who don't have a unlimited amount of money to blow their Z up and build it 10 different times like this shop can. So don't come here (and I know it was not you) and cry about how the Z cant run those times bla bla bla and say what is clearly a heavily modded car 20psi turbo kit E85 is running faster then any Z can.

__________________
2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness.
???Whp ???WTQ (Will find out come spring time)

Red__Zed

This is not an "unlimited budget" build by any stretch

red6spd

unlimited as Bam! the motor goes eh no big deal, bam the tranny pops eh no big deal, crap there goes the rear!

Where as the normal people on the forum with FI don't generally have the money to build/replace those things when the pop right away so they tend to not go as crazy.

__________________
2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness.
???Whp ???WTQ (Will find out come spring time)

Red__Zed

Most shops don't either.

Cmike2780

Impressive! That's pretty much what you expect to happen when you combine a light car with lots of power.

We still don't know how much that block can handle, but it's pretty cool how they're pretty much pushing it to the limit. I have a feeling it they probably need more time making it reliable, but you can't help but praise these guys for a job well done. I'm pretty sure making it reliable for DD with this much boost is going to take some upgrades to the internals. I'm curious at what the final price tag for such a set-up would actually cost.

The BRZ fanboys need to cool it with the bragging though. I don't think GT-R, Porsche or Ferrari owners really have a lot to "worry" about any more than the world's faster Civic.

__________________

[09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R]

shadoquad

red6spd

I'm sure it did not cost a crazy amount, the point I'm getting at is you really don't care if it pops correct? If your going to do FI on a car that does not have it its wise to have some spare money just in case the motor goes but most the guys running FI on this forum do care if it pops and don't get to out of hand with the boost. What do you think the longevity is on a engine with a set like this? Your the expert but it don't seem long to me.

__________________
2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness.
???Whp ???WTQ (Will find out come spring time)

visconti

We're prepared for anything at this point.

The turbo kit that's on the car can support another 100WHP if needed.

I kept the car at a power level where I thought it would actually have a chance.

Based on the testing we're doing ( more than 1/4 stuff ) it looks surprisingly good. Two months ago i wouldn't have believed it.

We also have a few customer cars - 270WHP, and another one at 300WHP. (Pumpgas)

So far so good.

John

red6spd

Whats the boost on the ones making 27-300? Probably a bit more reasonable then 20

__________________
2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness.
???Whp ???WTQ (Will find out come spring time)

visconti

Its a different turbo.

9 PSI.

The 300whp lives in long island.

Soon to run on e85 with more boost. 15ish

-John

shadoquad

The car is so light, I bet it's a screamer even at 300hp.