4dsc

Staggered357 · 02-12-2013, 08:47 PM

Akebono's are here... Should be in Sat... I am ecstatic...

SS_Firehawk · 02-12-2013, 09:11 PM

Nice. I'm excited my Wife is getting her car back from the body shop. She backed it into a pole...

Staggered357 · 02-13-2013, 06:55 AM

This is what happens when you have 24 hour duty...

DEpointfive0 · 02-13-2013, 06:56 AM

Quote:

Originally Posted by Staggered357

( Click to show/hide )

This is what happens when you have 24 hour duty...

What??? Did them yourself?

Staggered357 · 02-13-2013, 07:24 AM

Yes and a buddy of mine... I followed the sticky..for the most part.... Used 400 grit sand paper to rough em up a little bit, then just two good coats of caliper blue, didn't want them to get too dark..waited about 2 hours... Then put the stickers on and two coats of clear engine enamel...have them pre-curing under a spot light for a few hours then will stick them in the oven for a bit...
Not bad for under 50$... Have to see how they hold up... If I had F-ed it up too bad... They were going to get sent to get powdercoated, but I definitely wanted to try and do them myself... I am also going to try and install them...

DEpointfive0 · 02-14-2013, 07:11 PM

My 2DSC and 4DSC

Staggered357 · 02-14-2013, 08:07 PM

Nice... Had some extra paint left over...

Staggered357 · 02-20-2013, 01:08 AM

2 down 2 to go... Weather got bad...

Staggered357 · 02-24-2013, 08:23 PM

Got all the Akebono's installed...

Thought the CV1 would clear... But had to get a 5/16" spacer

SS_Firehawk · 02-24-2013, 08:37 PM

Impressive. What was needed outside of what's on the car and what comes with the Akebono's?

Staggered357 · 02-24-2013, 09:24 PM

Quote:

Originally Posted by SS_Firehawk

Impressive. What was needed outside of what's on the car and what comes with the Akebono's?

Thanks Fire... Nothing really except the spacers...direct bolt on.. The 350z require a bracket...

Staggered357 · 02-26-2013, 08:10 PM

Just finished waxing car... Smoking a black n mild jazz...

Love the akebono's...
Got a z1 Motorsport satin badge too..

Staggered357 · 03-24-2013, 02:03 AM

Taillights smoked...

Custom floor fabricated for full size spare...

007 and 3/8ths custom started...

Fabricating space for AR 15 next...

Also I ended up having to need spacers with my akebono and my Vossens..I bought a 7/16th inch (7mm) spacer for the time being but ordered a 10mm spacer from Z1, I also have the extended studs. I was wondering can I use the 10mm with my existing studs or do I need to replace them?

DEpointfive0 · 03-24-2013, 02:17 AM

^^^^^ this fücking guy, LOL
SUCH A REDNECK, I love it!

You need extended studs to be safe brother!

Staggered357 · 03-24-2013, 03:42 PM

Quote:

Originally Posted by DEpointfive0

^^^^^ this fücking guy, LOL
SUCH A REDNECK, I love it!

You need extended studs to be safe brother!

Lmao... Thanks... She is the epitome of the Z into a Maxima baby commercial...

02-12-2013, 09:11 PM	#47 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Nice. I'm excited my Wife is getting her car back from the body shop. She backed it into a pole... __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

02-14-2013, 08:07 PM	#52 (permalink)
Staggered357 Base Member Join Date: May 2012 Location: NY VA GA Posts: 149 Drives: Nissan Maxima 10 Rep Power: 13	Nice... Had some extra paint left over... jlo370z likes this.

02-20-2013, 01:08 AM	#53 (permalink)
Staggered357 Base Member Join Date: May 2012 Location: NY VA GA Posts: 149 Drives: Nissan Maxima 10 Rep Power: 13	2 down 2 to go... Weather got bad... DEpointfive0 likes this.

02-24-2013, 08:37 PM	#55 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Impressive. What was needed outside of what's on the car and what comes with the Akebono's? __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

03-24-2013, 02:17 AM	#59 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	^^^^^ this fücking guy, LOL SUCH A REDNECK, I love it! You need extended studs to be safe brother! __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

02-12-2013, 08:47 PM	#46 (permalink)
Staggered357 Base Member Join Date: May 2012 Location: NY VA GA Posts: 149 Drives: Nissan Maxima 10 Rep Power: 13	Akebono's are here... Should be in Sat... I am ecstatic...

02-13-2013, 06:55 AM	#48 (permalink)
Staggered357 Base Member Join Date: May 2012 Location: NY VA GA Posts: 149 Drives: Nissan Maxima 10 Rep Power: 13	This is what happens when you have 24 hour duty...

02-13-2013, 07:24 AM	#50 (permalink)
Staggered357 Base Member Join Date: May 2012 Location: NY VA GA Posts: 149 Drives: Nissan Maxima 10 Rep Power: 13	Yes and a buddy of mine... I followed the sticky..for the most part.... Used 400 grit sand paper to rough em up a little bit, then just two good coats of caliper blue, didn't want them to get too dark..waited about 2 hours... Then put the stickers on and two coats of clear engine enamel...have them pre-curing under a spot light for a few hours then will stick them in the oven for a bit... Not bad for under 50$... Have to see how they hold up... If I had F-ed it up too bad... They were going to get sent to get powdercoated, but I definitely wanted to try and do them myself... I am also going to try and install them...

02-24-2013, 08:23 PM	#54 (permalink)
Staggered357 Base Member Join Date: May 2012 Location: NY VA GA Posts: 149 Drives: Nissan Maxima 10 Rep Power: 13	Got all the Akebono's installed... Thought the CV1 would clear... But had to get a 5/16" spacer

02-26-2013, 08:10 PM	#57 (permalink)
Staggered357 Base Member Join Date: May 2012 Location: NY VA GA Posts: 149 Drives: Nissan Maxima 10 Rep Power: 13	Just finished waxing car... Smoking a black n mild jazz... Love the akebono's... Got a z1 Motorsport satin badge too..

03-24-2013, 02:03 AM	#58 (permalink)
Staggered357 Base Member Join Date: May 2012 Location: NY VA GA Posts: 149 Drives: Nissan Maxima 10 Rep Power: 13	Taillights smoked... Custom floor fabricated for full size spare... 007 and 3/8ths custom started... Fabricating space for AR 15 next... Also I ended up having to need spacers with my akebono and my Vossens..I bought a 7/16th inch (7mm) spacer for the time being but ordered a 10mm spacer from Z1, I also have the extended studs. I was wondering can I use the 10mm with my existing studs or do I need to replace them?