Proud owner of a 240sx :)

06_footy · 10-29-2011, 02:42 PM

So being bored i stumbled across a deal I couldn't pass up. Been looking for something fun to come home to and a project that I can work on and know its been built from the ground up. So Im now the owner of a 95' 240sx (S14) 5spd. It already had some mods that include a intake, exhaust and strut bar. I know no threads worthy without some pics so here they are...

nmjaxx9 · 10-29-2011, 03:11 PM

Nice. Congrats

Spikuh · 10-29-2011, 03:47 PM

What are your plans for it? You staying KA or swapping?

06_footy · 10-29-2011, 04:03 PM

Quote:

Originally Posted by Spikuh

What are your plans for it? You staying KA or swapping?

The motor needs some work. I'll let my mechanic back at home take a closer look at it and give me his opinion. I'm elsewhere so I cant be there at the moment. I've already priced out a SR20DET swap. Found a motor and everything but after looking at my surrounding area. I found some good used KA motors for very cheap. Either way it's getting a turbo and fully built engine.

Once the engine is done and taken care of. I will strip the interior of anything I don't need such as sound deadening material etc.. Leaving just the dash, door panels in tact. It will get a rollcage along with racing seats & harness.

Finally after about a week of searching for a color to paint the thing. I've pretty much settled on a color. Which is Black cherry since I've grown to like it on nissan's and I want something beautiful yet deadly.

Should be a fun project at hand. I should be back in the states soon and wrenching on it.

Spikuh · 10-30-2011, 11:02 AM

Quote:

Originally Posted by 06_footy

The motor needs some work. I'll let my mechanic back at home take a closer look at it and give me his opinion. I'm elsewhere so I cant be there at the moment. I've already priced out a SR20DET swap. Found a motor and everything but after looking at my surrounding area. I found some good used KA motors for very cheap. Either way it's getting a turbo and fully built engine.

Once the engine is done and taken care of. I will strip the interior of anything I don't need such as sound deadening material etc.. Leaving just the dash, door panels in tact. It will get a rollcage along with racing seats & harness.

Finally after about a week of searching for a color to paint the thing. I've pretty much settled on a color. Which is Black cherry since I've grown to like it on nissan's and I want something beautiful yet deadly.

Should be a fun project at hand. I should be back in the states soon and wrenching on it.

If you are planning on doing a full engine build no matter which engine one you get, I would just stick with the KA in the car unless your block is no good. No need to spend money only to throw out most of the engine.

If you do go with the KA, you may want to look into the BC Stroker kit which bumps the displacement to 2.65L and comes with a better crank shaft than stock. If I remember correctly, the whole setup (pistons, rods, crank) is supposed to weight less than the stock setup letting it spin up faster and rev higher. It was supposed to be good for at least 8k revs safely, but I never found anyone who tried it.

And if you do go the stroker route, dyno it before you throw on the turbo!!! I have always been curious what the kit would do to the curve, especially in the upper range where the KA falls flat due to bad balance of the crankshaft.

You are basically going the route I plan to go in a year or two with mine (have to start paying on a Z soon so one thing at a time) except I will be staying with the KA or swapping to a VQ or LS engine.

Whatever you decide, keep us updated with pics!!!

06_footy · 10-30-2011, 11:57 AM

Quote:

Originally Posted by Spikuh

If you are planning on doing a full engine build no matter which engine one you get, I would just stick with the KA in the car unless your block is no good. No need to spend money only to throw out most of the engine.

If you do go with the KA, you may want to look into the BC Stroker kit which bumps the displacement to 2.65L and comes with a better crank shaft than stock. If I remember correctly, the whole setup (pistons, rods, crank) is supposed to weight less than the stock setup letting it spin up faster and rev higher. It was supposed to be good for at least 8k revs safely, but I never found anyone who tried it.

And if you do go the stroker route, dyno it before you throw on the turbo!!! I have always been curious what the kit would do to the curve, especially in the upper range where the KA falls flat due to bad balance of the crankshaft.

You are basically going the route I plan to go in a year or two with mine (have to start paying on a Z soon so one thing at a time) except I will be staying with the KA or swapping to a VQ or LS engine.

Whatever you decide, keep us updated with pics!!!

Like minds think alike.

bigaudiofanat · 10-30-2011, 12:16 PM

Nice congrats man!!

Jeffblue · 10-30-2011, 12:37 PM

Congrats. If you're gonna take that motor out, you should put back an SR-20 or rb-25/26

GaleForce · 10-30-2011, 03:06 PM

Nice. You'll have fun with that. My local Nissan dealer just had this on the lot, it didn't last a day.

m4a1mustang · 10-30-2011, 03:15 PM

Looks like a fun project!

Rooster89 · 11-03-2011, 12:08 AM

Quote:

Originally Posted by Jeffblue

Congrats. If you're gonna take that motor out, you should put back an SR-20 or rb-25/26

RB25/26 is 240sx is definitely a beastly sleeper car. I was waiting for someone to say something along those lines. IIRC that either rb swap you will need to mate it to the rb25 tranny, unless you have so much money you should be pricing the Juke-R.

10-29-2011, 02:42 PM	#1 (permalink)
06_footy Base Member Join Date: Oct 2010 Location: Daytona Beach Age: 35 Posts: 97 Drives: Your Mom Wild Rep Power: 15	Proud owner of a 240sx :) So being bored i stumbled across a deal I couldn't pass up. Been looking for something fun to come home to and a project that I can work on and know its been built from the ground up. So Im now the owner of a 95' 240sx (S14) 5spd. It already had some mods that include a intake, exhaust and strut bar. I know no threads worthy without some pics so here they are... __________________ DD : 2012 Ford Fusion Toy : 95' Nissan 240sx 5spd

10-30-2011, 12:16 PM	#7 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Nice congrats man!! __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

10-30-2011, 03:15 PM	#10 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Looks like a fun project! __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Proud Owner	vader	New 370Z Owner	11	05-06-2011 11:59 PM
Proud new owner	snake1212	New 370Z Owner	13	02-11-2011 11:15 PM
Proud New Owner of Z	navamous	New 370Z Owner	9	03-28-2010 11:57 PM
ex 240sx owner checkin in	370z	Introduction	9	01-04-2009 05:34 PM
Hello And Happy new Years 240sx owner and motorsports enthusiast	kndacomplx	Introduction	4	01-04-2009 05:25 PM

10-29-2011, 03:11 PM	#2 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 26	Nice. Congrats

10-29-2011, 03:47 PM	#3 (permalink)
Spikuh A True Z Fanatic Join Date: Jul 2009 Location: The Ark Posts: 2,357 Drives: '09 370z Rep Power: 21	What are your plans for it? You staying KA or swapping?

10-30-2011, 12:37 PM	#8 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 36 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 37	Congrats. If you're gonna take that motor out, you should put back an SR-20 or rb-25/26