5.0

Red__Zed · 09-15-2011, 11:57 PM

Red__Zed · 09-15-2011, 11:58 PM

Quote:

Originally Posted by m4a1mustang

That was all you and Jay man.

dude like...like...my whole left side...was totally numb....

m4a1mustang · 09-16-2011, 12:01 AM

Quote:

Originally Posted by Red__Zed

dude like...like...my whole left side...was totally numb....

That was hilarious

Red__Zed · 09-16-2011, 12:03 AM

this thread is now about zdazy 2012

SPOHN · 09-16-2011, 12:20 AM

Does it feel werd when putting in reverse being it's in the other direction?. My Ford (450) work truck is like that.

m4a1mustang · 09-16-2011, 12:24 AM

Quote:

Originally Posted by Red__Zed

this thread is now about zdazy 2012

m4a1mustang · 09-16-2011, 12:27 AM

Quote:

Originally Posted by SPOHN

Does it feel werd when putting in reverse being it's in the other direction?. My Ford (450) work truck is like that.

It was a weird transition for me at first (all my other MTs had reverse in the same position as the Z), but once you get used to it I find it a better setup. Going from reverse to 1st is quicker.

Red370 · 09-16-2011, 03:38 AM

holy shyt, and another turns to the dark side

Congrats on the new ride man, it looks awesome, although, given the chance, I definitely would have gone the Boss route

First things first, uncork that stock exhaust. Next, either a JLT/Airraid/Steeda CAI/Tune is a must. And if you really wanna melt faces and turn heads, an offroad H/X pipe (X pipe is nasty raspy so I went with an H). If you want a bit more engine noise in the cabin, you can remove the foam from inside the sound tube as well. Do this and you'll be sitting well into the 400's at the wheel.

BTW, the new Hurst short throw looks amazing, a little on the expensive side but it reminds me of old 60's era drag muscle.

Alchemy · 09-16-2011, 07:45 AM

Quote:

Originally Posted by m4a1mustang

I drove down from the DC area, so you'd spend a bit more in gas, but I want to say it was about $500. I split the cost of a cabin with Red__Zed and GM_Traitor3.5 so that helps keep the expense down.

Regular cabins run about $160/night and the lodge rooms run $89/night.

Thanks for the info

I figured about $500 in gas. So what is the area called where the lodging is? Is there a certain time I should book a cabin/room by? Sorry to keep steering this thread off topic Red.

b1adesofcha0s · 09-16-2011, 09:00 AM

Awesome pics Dan, that review makes me want to get a 5.0 too, but its not gonna happen

Really wish i can go to ZDayZ with you guys next year, I'll find out if I can go once I find out my final exam schedule for spring semester. Damn people picked the WORST time to schedule it

m4a1mustang · 09-16-2011, 09:10 AM

Quote:

Originally Posted by Red370

holy shyt, and another turns to the dark side

Congrats on the new ride man, it looks awesome, although, given the chance, I definitely would have gone the Boss route

First things first, uncork that stock exhaust. Next, either a JLT/Airraid/Steeda CAI/Tune is a must. And if you really wanna melt faces and turn heads, an offroad H/X pipe (X pipe is nasty raspy so I went with an H). If you want a bit more engine noise in the cabin, you can remove the foam from inside the sound tube as well. Do this and you'll be sitting well into the 400's at the wheel.

BTW, the new Hurst short throw looks amazing, a little on the expensive side but it reminds me of old 60's era drag muscle.

There is a lot of criticism about the Hurst shifter for the lack of a reverse lockout. I'd never use that one.

Has MGW come out with theirs yet? I know they were building an entire new mount assembly.

m4a1mustang · 09-16-2011, 09:10 AM

Quote:

Originally Posted by b1adesofcha0s

Awesome pics Dan, that review makes me want to get a 5.0 too, but its not gonna happen

Really wish i can go to ZDayZ with you guys next year, I'll find out if I can go once I find out my final exam schedule for spring semester. Damn people picked the WORST time to schedule it

No, your school picked the worst time to schedule exams! Git yur facts ryte!

Red370 · 09-16-2011, 09:26 AM

Quote:

Originally Posted by m4a1mustang

There is a lot of criticism about the Hurst shifter for the lack of a reverse lockout. I'd never use that one.

Has MGW come out with theirs yet? I know they were building an entire new mount assembly.

theres no reverse lockout? It does come with an LED indicator so you can tell that you're in reverse, so thats better than nothing. Didnt know MGW had one coming out.

GaleForce · 09-16-2011, 09:35 AM

Hey, I noticed a few things wrong with your Z

1.Someone put 5.0 on the fender
2.The floor mats say Mustang
3.The Shifter knob has reverse in the wrong location

My best guess is, someone pull a bad prank on you. It's ok, we're here to help you through this tough time.

Seriously, nice ride! Your pics turned out really good too! More pics!!!

m4a1mustang · 09-16-2011, 09:36 AM

Quote:

Originally Posted by Red370

theres no reverse lockout? It does come with an LED indicator so you can tell that you're in reverse, so thats better than nothing. Didnt know MGW had one coming out.

Yeah, no lockout which is a big deal when 1st and Reverse are essentially in the same place. Not a smart design, IMO.

I think both Steeda and Barton would be better options than the Hurst... I'll give it an A+ for looks, though. But as far as function I would never use one.

Regarding MGW, they have had something in the works for a while. I'm not sure if it's available yet or not, but it's supposed to replace the entire shifter and mount assembly.

Just did a search, it's available. Here's a comprehensive review: SVTPerformance MGW Omnibus : MGW MT-82 Shifter Preview, Install, and Review - SVTPerformance

I am going to need to look into this. MGW is a proven company and have made some great shifters in the past.

09-16-2011, 12:20 AM	#35 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Does it feel werd when putting in reverse being it's in the other direction?. My Ford (450) work truck is like that. __________________

09-16-2011, 03:38 AM	#38 (permalink)
Red370 A True Z Fanatic Join Date: Jul 2009 Location: Kaiserslautern, Germany Posts: 4,391 Drives: your mom to church Rep Power: 296	holy shyt, and another turns to the dark side Congrats on the new ride man, it looks awesome, although, given the chance, I definitely would have gone the Boss route First things first, uncork that stock exhaust. Next, either a JLT/Airraid/Steeda CAI/Tune is a must. And if you really wanna melt faces and turn heads, an offroad H/X pipe (X pipe is nasty raspy so I went with an H). If you want a bit more engine noise in the cabin, you can remove the foam from inside the sound tube as well. Do this and you'll be sitting well into the 400's at the wheel. BTW, the new Hurst short throw looks amazing, a little on the expensive side but it reminds me of old 60's era drag muscle. __________________ 2011 Mustang 5.0 \| 3.55's \| Lethal Performance off road H-Pipe \| Magnaflow Muffler Delete \| JLT CAI/Bama tuned 417whp/ 404 ft/lbs Last edited by Red370; 09-16-2011 at 03:41 AM.

09-16-2011, 09:00 AM	#40 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Awesome pics Dan, that review makes me want to get a 5.0 too, but its not gonna happen Really wish i can go to ZDayZ with you guys next year, I'll find out if I can go once I find out my final exam schedule for spring semester. Damn people picked the WORST time to schedule it __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

09-15-2011, 11:57 PM	#31 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120

09-16-2011, 12:03 AM	#34 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	this thread is now about zdazy 2012

09-16-2011, 09:35 AM	#44 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Hey, I noticed a few things wrong with your Z 1.Someone put 5.0 on the fender 2.The floor mats say Mustang 3.The Shifter knob has reverse in the wrong location My best guess is, someone pull a bad prank on you. It's ok, we're here to help you through this tough time. Seriously, nice ride! Your pics turned out really good too! More pics!!!