Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   North East Region (http://www.the370z.com/north-east-region/)
-   -   Need Help? Let me know! (http://www.the370z.com/north-east-region/5937-need-help-let-me-know.html)

bigaudiofanat 02-28-2015 07:31 AM

Long time customer of 5 years contacted me for a install on his newest car. In the past we have done active setups, tried new speakers such as the pioneer stage 4's but we decided to get back to basics and go with a high end component pair. He told me he wanted bone shaking bass so we decided to go with a pre build JL box with a W7 anniversary edition as well as upgrade the factory alternator. I recommended a set of K2 Focals for the front and to use his old Audison LRX 2.4k. We decided to go with a perfect fit kit and the Alpine X008U which I have to say is an amazing kit with a simple plug and play installation. Sense we went all out with a good quality set of components it was decided to do second skin luxury liner pro as well as damplifier. Onto the photos.


The toys.
Alpine X008U
Alpine PDX-M12
Audison LRX 2.4
Focal Ks 6.5's
KnuKoncepts 0 gauge OFC
Stinger RCA's
Stinger Speaker wire
Quality Power 240a Alternator
JL HO112R-12W7-3 (HO box + JL 12W7 combo)
Second Skin damplifier and Luxury liner pro

The old
http://i483.photobucket.com/albums/r...222_084047.jpg

Pulled out and ready for the new 8 inch screen
http://i483.photobucket.com/albums/r...4/DSC00463.jpg


Getting ready for damplifier and new speaker wire.

http://i483.photobucket.com/albums/r...4/DSC00462.jpg

Power wire ran
http://i483.photobucket.com/albums/r...4/DSC00464.jpg

http://i483.photobucket.com/albums/r...4/DSC00497.jpg

New alternator installed. (not by me)
http://i483.photobucket.com/albums/r...4/DSC00466.jpg

http://i483.photobucket.com/albums/r...4/DSC00468.jpg

Crappy stock speakers GONE.
http://i483.photobucket.com/albums/r...4/DSC00470.jpg

http://i483.photobucket.com/albums/r...4/DSC00472.jpg

Mat done by customer as assistance and to help out.
http://i483.photobucket.com/albums/r...4/DSC00474.jpg

http://i483.photobucket.com/albums/r...4/DSC00475.jpg

http://i483.photobucket.com/albums/r...4/DSC00482.jpg

http://i483.photobucket.com/albums/r...4/DSC00483.jpg

http://i483.photobucket.com/albums/r...4/DSC00484.jpg

New stinger PRO speaker wire ran.
http://i483.photobucket.com/albums/r...4/DSC00476.jpg

All wires in line
http://i483.photobucket.com/albums/r...4/DSC00469.jpg

The old tweeters had a nice mount made however it was all in one. After drilling and filed smooth for a pressure tight fit.

http://i483.photobucket.com/albums/r...4/DSC00477.jpg

New tweeters were pressure installed along with pipe dope to keep the secure.
http://i483.photobucket.com/albums/r...4/DSC00478.jpg

Speakers ready for install.
http://i483.photobucket.com/albums/r...4/DSC00485.jpg

http://i483.photobucket.com/albums/r...4/DSC00486.jpg

http://i483.photobucket.com/albums/r...4/DSC00487.jpg

All torx head screws were used.

http://i483.photobucket.com/albums/r...4/DSC00489.jpg

http://i483.photobucket.com/albums/r...4/DSC00490.jpg

http://i483.photobucket.com/albums/r...4/DSC00494.jpg

The old and the new.
http://i483.photobucket.com/albums/r...4/DSC00492.jpg

Some...modifications had to be made to fit the two amps in the storage area.

http://i483.photobucket.com/albums/r...2_152046_1.jpg

http://i483.photobucket.com/albums/r...2_152127_1.jpg

Amps were a seriously tight fit with no clearance to spare.
http://i483.photobucket.com/albums/r...4/DSC00496.jpg

Bass knob installed for a stealth look.
http://i483.photobucket.com/albums/r...4/DSC00498.jpg

http://i483.photobucket.com/albums/r...4/DSC00493.jpg

http://i483.photobucket.com/albums/r...4/DSC00499.jpg

http://i483.photobucket.com/albums/r...RAV4/5917.jpeg

bigaudiofanat 06-22-2015 05:31 PM

Bump running specials on car detailing and audio installs contact for details.

2011 Nismo#91 06-29-2015 01:10 PM

Quote:

Originally Posted by bigaudiofanat (Post 3236268)
Bump running specials on car detailing and audio installs contact for details.

Bump for a guy who can install Z head units blindfolded.

Ronin06 06-30-2015 07:48 AM

HU Gap
 
2 Attachment(s)
Any ideas on what I can do to limit the gap around the HU? It's a Kenwood DPX791BH

It came with two trim pieces, one for Toyota and the standard both to big. It's mounted using the stock bracket and dash pieces.

bigaudiofanat 07-01-2015 07:06 AM

Quote:

Originally Posted by Ronin06 (Post 3243485)
Any ideas on what I can do to limit the gap around the HU? It's a Kenwood DPX791BH

It came with two trim pieces, one for Toyota and the standard both to big. It's mounted using the stock bracket and dash pieces.

Use the Schoche dash kit there will be no gap

Ronin06 07-18-2015 11:43 PM

Quote:

Originally Posted by bigaudiofanat (Post 3244745)
Use the Schoche dash kit there will be no gap

Thanks worked like a charm.

ekferio 09-23-2015 07:37 PM

Have you done a rear fog light install on 370z?

bigaudiofanat 11-23-2015 06:41 PM

Been a while sense I have posted updates. Up first a 370Z that was wrapped, I sealed it with 22ple and did a full detail on it minus the polishing.

http://i483.photobucket.com/albums/r...0560_o%201.jpg

http://i483.photobucket.com/albums/r...35715369_o.jpg

http://i483.photobucket.com/albums/r...5369_o%201.jpg
http://i483.photobucket.com/albums/r...00063091_o.jpg

bigaudiofanat 11-23-2015 06:45 PM

Next up is a install I did about a month ago for one of our members that is over seas right now. He will be enjoying it soon enough.

New head unit installed everything soldered and heat shrunk metra aswc-1 was used for steering wheel controls.
http://i483.photobucket.com/albums/r...31244206_o.jpg

http://i483.photobucket.com/albums/r...86079551_o.jpg

Bass knob was installed for adjustment on the fly.
http://i483.photobucket.com/albums/r...57011781_n.jpg

Installed the RF amp in a cutout of the foam for steal installation.
http://i483.photobucket.com/albums/r...45992993_o.jpg

Power wire ran
http://i483.photobucket.com/albums/r...93374025_o.jpg

Zenclosure box installed with Arc Audio sub.

http://i483.photobucket.com/albums/r...09804218_o.jpg

bigaudiofanat 11-23-2015 06:52 PM

Last week I finished up a full system that was probably one of the hardest hitting systems I have done in a Z by far. 2 JL W3's shared 1100 watts of pure power. However with a simple twist of the knob the system could turn into a SQ based system.

http://i483.photobucket.com/albums/r...89503370_o.jpg

New head unit
http://i483.photobucket.com/albums/r...52603466_o.jpg

http://i483.photobucket.com/albums/r...10021054_o.jpg

http://i483.photobucket.com/albums/r...14886290_o.jpg

Both amps are hidden under the seats with plenty of air flow.
http://i483.photobucket.com/albums/r...92472239_o.jpg

http://i483.photobucket.com/albums/r...65422145_o.jpg

http://i483.photobucket.com/albums/r...76575398_o.jpg

http://i483.photobucket.com/albums/r...65422145_o.jpg
Reverse camera installed and extra cabling was tucked under center.
http://i483.photobucket.com/albums/r...26634420_o.jpg

Kenwood camera is installed in a steal factory location.
http://i483.photobucket.com/albums/r...98664651_o.jpg

Ran through factory grommet
http://i483.photobucket.com/albums/r...80069372_o.jpg

Inside the sub box wires were soldered and heat shrunk to provide maximum connection.
http://i483.photobucket.com/albums/r...02429785_o.jpg
Ends conencted to box were cleaned up.
http://i483.photobucket.com/albums/r...24767954_o.jpg

Both subs installed in a zenclosure box.
http://i483.photobucket.com/albums/r...49232790_o.jpg

New speaker wire ran
http://i483.photobucket.com/albums/r...81233588_o.jpg


New focal speakers installed with sound dampener.
http://i483.photobucket.com/albums/r...99410894_o.jpg

http://i483.photobucket.com/albums/r...00295048_o.jpg

Everything installed and ready to rock
http://i483.photobucket.com/albums/r...14886290_o.jpg

johnxxx 12-06-2015 11:35 AM

Full Audio Build Completed along with Detail
 
7 Attachment(s)
Yo Matt... just wanted to say a big thank you for all your help ... car sounds fantastic and that bass really kicks! Can't seem to wipe this smile from my face.:icon17: Everything is nice and hidden except for the subs of course but the Zenclosures make them look like they belong in the car. This simply blows the OEM bose system away and I couldn't be happier. :ughdance:

It's so nice to have the V1 and dash cam hard wired besides the aesthetics of not having wires hanging all over the place but my dash cam is now functional when parked and I'm free to use the stock power again. I like the fact you can control the base with a turn of the knob from a nice punchy base sound to the insane (mess up your hair, massage your back) mode. It's sick. Having the head unit replace my stock HU also allowed me to integrate a GPS and backup camera which is extremely useful...again, no need for a separate GPS hanging on the windshield taking up space.

Finally was able to get out and enjoy the day yesterday and took some pictures of the Z. That detail with polish and sealant really makes the paint shine. Can't wait to meet up with the rest of the guys in NJ here and show them how excellent this all turned out.

zzzzz370zzzzz 01-14-2016 12:40 AM

Quote:

Originally Posted by bigaudiofanat (Post 2705096)
Bump for spring. Looking to do a lot more installs this year. Became authorized to sell certain brands as well.

What brands are you selling?

bigaudiofanat 01-19-2016 03:12 PM

Quote:

Originally Posted by zzzzz370zzzzz (Post 3387897)
What brands are you selling?

Metra, arc audio, stinger, pioneer, sony, mb quarts. Kenwood and others I sell at discount as well.

DeliriousClam 01-19-2016 05:20 PM

Any opinions on what's the best backup camera as far as night video quality?

bigaudiofanat 02-01-2016 10:48 AM

Quote:

Originally Posted by DeliriousClam (Post 3392113)
Any opinions on what's the best backup camera as far as night video quality?

Rydeen or kenwood are the best


All times are GMT -5. The time now is 01:55 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2