Need Help? Let me know!

bigaudiofanat · 04-07-2012, 09:42 AM

Beauty panel

Wires are all organized.

bigaudiofanat · 04-07-2012, 09:42 AM

bigaudiofanat · 04-16-2012, 05:19 PM

Bump for warm weather.

Vertigo · 04-17-2012, 01:35 PM

Quote:

Originally Posted by bigaudiofanat

Bump for warm weather.

x3475893479794

Past 2 days were phenomenal

bigaudiofanat · 04-23-2012, 08:04 AM

Quote:

Originally Posted by Vertigo

x3475893479794

Past 2 days were phenomenal

OH YA!!!

bigaudiofanat · 04-23-2012, 08:07 AM

This past weekend, I worked on a good friends jimmy. He completely blew his stock speakers. So I felt like I had to replace them.

Installed
Kenwood head unit
Focal polyglass speakers
metra axxess

Future:
infinity amp
rear speakers
Sub

Lets get started

Before

During

Wiring

bigaudiofanat · 04-23-2012, 08:09 AM

I actually switched the tweeter mounting brackets. The left went to the right and right went to the left. This allowed the tweeters to be aimed just a tad of axis.

bigaudiofanat · 05-06-2012, 08:24 PM

Today was a simple sub and amp integration into the factory system of a VW R32.

Battery

Fuse block ran and insulated.

Used the 12 volt plug to wake up the LOC

Powered the LOC from the fuse block

Everything ran

Set up

Vertigo · 05-06-2012, 11:19 PM

^ well done to Matt on a clean install. Thanks again bro.

bigaudiofanat · 05-08-2012, 10:17 AM

Long story short, the customer contacted me about a year ago to correct what other shops had done. After fixing those issues the customer constantly changed either amps or speakers every month or so. :laugh:

So this is a complete gut and rebuild. Everything is being taken out and re ran or replaced.

The amps will both be on a amp rack above the spare tire. The sub will now be centered in the trunk instead of to the side. Let's begin

Tear down

Found this when I was pulling up the power wire

They spliced into the power wire for the MS8

The goodies

bigaudiofanat · 05-09-2012, 08:53 PM

Today I setup the tweeter pods, and did the first layer of resin.

Made tweeter rings

Glued into place

First time doing the tweeter pods, so I did get some sag. Was not able to stretch it out.

bigaudiofanat · 05-10-2012, 08:52 PM

New speakers installed

Because the door panels have been taken off so many times; I replaced all the panel pins.

Power wire and speaker wire ran

Other pillar wrapped

bill b · 05-13-2012, 09:08 AM

Quote:

Originally Posted by bigaudiofanat

Hello, my name is Matt. I have been doing installs for about 8 years now and enjoy helping people if they have questions. Please feel free to ask. My aim and yahoo messenger is reimermatt. No question is to stupid to get answered. I will also post my work here as well.

Hi matt, I have a 2012 370 z and im putting in a pioneer z130bt, I have read every thead a bunch of times since thursday and nobody gives an exact location or pic.where to find the car speed signal input,they do tell and show a pic. where to find the reverse gear signal input.the only thing talked about was that it is yellow and in the 18 pin hole but that does not help much if it is really correct. can you help? thank you bill ......

bigaudiofanat · 05-13-2012, 05:52 PM

Quote:

Originally Posted by bill b

Hi matt, I have a 2012 370 z and im putting in a pioneer z130bt, I have read every thead a bunch of times since thursday and nobody gives an exact location or pic.where to find the car speed signal input,they do tell and show a pic. where to find the reverse gear signal input.the only thing talked about was that it is yellow and in the 18 pin hole but that does not help much if it is really correct. can you help? thank you bill ......

Bill, the reverse wire would be located in the rear of the car on the left side, there are usually 3 orange wires located in the harness, check for 12 volt with a volt meter on them while in reverse. That is the one you need. As far as the speed sensor sorry I am not much help as I have never connected them.

bigaudiofanat · 05-13-2012, 05:53 PM

Today I built and dry fitted the amp rack together. Going to have to build a new false floor as the amp rack comes to the height of the floor already.

04-07-2012, 09:42 AM	#316 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Beauty panel Wires are all organized. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

04-07-2012, 09:42 AM	#317 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	__________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

04-16-2012, 05:19 PM	#318 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Bump for warm weather. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

04-23-2012, 08:07 AM	#321 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	This past weekend, I worked on a good friends jimmy. He completely blew his stock speakers. So I felt like I had to replace them. Installed Kenwood head unit Focal polyglass speakers metra axxess Future: infinity amp rear speakers Sub Lets get started Before During Wiring __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

04-23-2012, 08:09 AM	#322 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	I actually switched the tweeter mounting brackets. The left went to the right and right went to the left. This allowed the tweeters to be aimed just a tad of axis. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

05-06-2012, 08:24 PM	#323 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Today was a simple sub and amp integration into the factory system of a VW R32. Battery Fuse block ran and insulated. Used the 12 volt plug to wake up the LOC Powered the LOC from the fuse block Everything ran Set up __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

05-06-2012, 11:19 PM	#324 (permalink)
Vertigo A True Z Fanatic Join Date: Dec 2011 Location: Philadelphia Posts: 15,476 Drives: 370z / R32 Rep Power: 221	^ well done to Matt on a clean install. Thanks again bro.

05-08-2012, 10:17 AM	#325 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Subaru Legacy Rebuild Long story short, the customer contacted me about a year ago to correct what other shops had done. After fixing those issues the customer constantly changed either amps or speakers every month or so. :laugh: So this is a complete gut and rebuild. Everything is being taken out and re ran or replaced. The amps will both be on a amp rack above the spare tire. The sub will now be centered in the trunk instead of to the side. Let's begin Tear down Found this when I was pulling up the power wire They spliced into the power wire for the MS8 The goodies __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

05-09-2012, 08:53 PM	#326 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Today I setup the tweeter pods, and did the first layer of resin. Made tweeter rings Glued into place First time doing the tweeter pods, so I did get some sag. Was not able to stretch it out. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

05-10-2012, 08:52 PM	#327 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	New speakers installed Because the door panels have been taken off so many times; I replaced all the panel pins. Power wire and speaker wire ran Other pillar wrapped __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

05-13-2012, 05:53 PM	#330 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Today I built and dry fitted the amp rack together. Going to have to build a new false floor as the amp rack comes to the height of the floor already. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/