Clutch fluid

Zoren 370 · 10-20-2014, 09:37 AM

What type and brand to use in replacing your clutch fluid?
Thanks.

Chuck33079 · 10-20-2014, 09:40 AM

Motul RBF600

dkmura · 10-20-2014, 10:09 AM

Any high quality DOT 4 brake fluid will do in the clutch master. I like the German-made ATE Gold 200, for a good combination of high heat performance, affordability and low hydroscopic properties.

JARblue · 10-20-2014, 10:40 AM

Quote:

Originally Posted by Chuck33079

Motul RBF600

If you're serious, Torque RT700 and Castrol SRF are probably your top choices.

Zoren 370 · 10-20-2014, 10:56 AM

Do you know how many bottles I need?

Does autozone or petboys would carry motul 600?
I wont have enough time to have it delivered from amazon or Z1.
Car needs to be done by Wednesday.

Thanks guys.

JARblue · 10-20-2014, 11:35 AM

Flushing the clutch, I've never needed much. A single 500mL bottle will be plenty.

I've never found it at the chain auto shops. Woods Fun Center here in town usually has it in stock (for ~40% markup) if I need it immediately. Otherwise, I just call a nearby shop and ask them to order it for me (they can usually have it for me the next day).

Zoren 370 · 10-20-2014, 11:37 AM

Thanks Jar!

Unfortunately they don't do that fairly quick in my little old town. Lol

Rep handed!

smoothtransit · 03-05-2015, 01:27 PM

I just flushed my clutch fluid a few days ago... After a lot of research I ended up putting DOT 3 brake fluid. Apparently the reality is that the brand does not make a difference because DOT 3 and DOT 4, etc all require the same specifications and standards. DOT 4 isnt necessary if you dont track your car. Just dont use DOT 5 as that does not mix with either 3, 4, or 5.1

fyi: im not saying dot 4 or dot 3 have the same standards, I mean in order to be dot 3 or dot 4, all brands must meet same requirements.

Chuck33079 · 03-05-2015, 02:08 PM

Quote:

Originally Posted by smoothtransit

I just flushed my clutch fluid a few days ago... After a lot of research I ended up putting DOT 3 brake fluid. Apparently the reality is that the brand does not make a difference because DOT 3 and DOT 4, etc all require the same specifications and standards. DOT 4 isnt necessary if you dont track your car. Just dont use DOT 5 as that does not mix with either 3, 4, or 5.1

fyi: im not saying dot 4 or dot 3 have the same standards, I mean in order to be dot 3 or dot 4, all brands must meet same requirements.

Given that these cars have CSC problems, and the first thing Nissan does to try and fix it is step up to a DOT 4 brake fluid, why would you go with a DOT 3? Also, why would you not want as high a boiling point as you can get given how easily our cars boil clutch fluid?

smoothtransit · 03-05-2015, 02:20 PM

Quote:

Originally Posted by Chuck33079

Given that these cars have CSC problems, and the first thing Nissan does to try and fix it is step up to a DOT 4 brake fluid, why would you go with a DOT 3? Also, why would you not want as high a boiling point as you can get given how easily our cars boil clutch fluid?

I can agree with what you are saying. For me, the only quick reputable brand i could get at the store was dot 3, so i went with it. The temperature difference is only about 45 degrees however, so I really doubt that it would end up doing damage going with Dot 3. From what i understand our cars come with DOT 3, dont they?

Chuck33079 · 03-05-2015, 02:22 PM

Quote:

Originally Posted by smoothtransit

I can agree with what you are saying. For me, the only quick reputable brand i could get at the store was dot 3, so i went with it. The temperature difference is only about 45 degrees however, so I really doubt that it would end up doing damage going with Dot 3. From what i understand our cars come with DOT 3, dont they?

It won't damage anything, it's just far from optimal. With the hydraulic problems these things have, why do anything but the best? It may prolong the time you have before the slave blows out.

smoothtransit · 03-05-2015, 02:25 PM

Quote:

Originally Posted by Chuck33079

It won't damage anything, it's just far from optimal. With the hydraulic problems these things have, why do anything but the best? It may prolong the time you have before the slave blows out.

Yeah I agree. So what do you think if I turkey baster remove the dot 3 from just the reservoir and add in some dot 4? (meaning not bleeding it out of the line again). Would this be worth it, or just leave the DOT 3? I just dont want to redo the process again

Chuck33079 · 03-05-2015, 02:26 PM

Quote:

Originally Posted by smoothtransit

Yeah I agree. So what do you think if I turkey baster remove the dot 3 from just the reservoir and add in some dot 4? (meaning not bleeding it out of the line again). Would this be worth it, or just leave the DOT 3? I just dont want to redo the process again

Do that, and go with a short interval before you bleed again. Don't worry too much about it. The CSC will fail either way.

smoothtransit · 03-05-2015, 02:34 PM

Quote:

Originally Posted by Chuck33079

Do that, and go with a short interval before you bleed again. Don't worry too much about it. The CSC will fail either way.

Hahaha lets try and be optimistic here!

Chuck33079 · 03-05-2015, 02:40 PM

Quote:

Originally Posted by smoothtransit

Hahaha lets try and be optimistic here!

There's no question about it, unfortunately. If you have an OEM plastic slave cylinder, one day you will be forced to replace it. Either you have replaced one, or you will. Honestly, go ahead and buy the HD replacement and mothball it. One day you'll be glad you had it on hand.

10-20-2014, 09:37 AM	#1 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Clutch fluid What type and brand to use in replacing your clutch fluid? Thanks.

10-20-2014, 09:40 AM	#2 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Motul RBF600 JARblue, Zoren 370 and LAVA like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

10-20-2014, 10:09 AM	#3 (permalink)
dkmura Base Member Join Date: Feb 2009 Location: Aurora, CO Posts: 108 Drives: SCCA T1/3 and GT3 Z Rep Power: 16	Any high quality DOT 4 brake fluid will do in the clutch master. I like the German-made ATE Gold 200, for a good combination of high heat performance, affordability and low hydroscopic properties. Zoren 370 likes this.

10-20-2014, 11:35 AM	#6 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Flushing the clutch, I've never needed much. A single 500mL bottle will be plenty. I've never found it at the chain auto shops. Woods Fun Center here in town usually has it in stock (for ~40% markup) if I need it immediately. Otherwise, I just call a nearby shop and ask them to order it for me (they can usually have it for me the next day). Zoren 370 likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

10-20-2014, 11:37 AM	#7 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Thanks Jar! Unfortunately they don't do that fairly quick in my little old town. Lol Rep handed! JARblue likes this.

10-20-2014, 10:56 AM	#5 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Do you know how many bottles I need? Does autozone or petboys would carry motul 600? I wont have enough time to have it delivered from amazon or Z1. Car needs to be done by Wednesday. Thanks guys.

03-05-2015, 01:27 PM	#8 (permalink)
smoothtransit Base Member Join Date: Dec 2014 Location: Seattle Posts: 63 Drives: 09 370 BS 6mt Rep Power: 11	I just flushed my clutch fluid a few days ago... After a lot of research I ended up putting DOT 3 brake fluid. Apparently the reality is that the brand does not make a difference because DOT 3 and DOT 4, etc all require the same specifications and standards. DOT 4 isnt necessary if you dont track your car. Just dont use DOT 5 as that does not mix with either 3, 4, or 5.1 fyi: im not saying dot 4 or dot 3 have the same standards, I mean in order to be dot 3 or dot 4, all brands must meet same requirements.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Recommended Clutch Fluid	JARblue	Engine & Drivetrain	18	01-18-2021 06:52 PM
Does clutch fluid expire?	scope22	Nissan 370Z General Discussions	12	06-12-2014 09:26 PM
Clutch fluid flush	ayrton88	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	4	05-05-2013 11:13 PM
Please help: clutch fluid reservoir cap.	hadokenuh	Engine & Drivetrain	5	05-05-2013 06:15 PM
Clutch fluid	Mt Tam I am	Brakes & Suspension	8	07-12-2012 01:34 PM