!!For 370Z Owners with the Stuck Hatch Release Issue!!

jbbrann · 09-20-2009, 02:38 PM

I removed the weight that is on the hatch near the latch underneath the trim. It seemed to fix the issue for me (for now) and the hatch doesn't really seem any more difficult to close.

kdo2milger · 09-20-2009, 02:39 PM

Quote:

Originally Posted by jbbrann

I removed the weight that is on the hatch near the latch underneath the trim. It seemed to fix the issue for me (for now) and the hatch doesn't really seem any more difficult to close.

what weight?

Kirkster · 09-20-2009, 06:57 PM

you may want to be careful adding more than 3 pennies as some 350Z owners that went to 4 pennies dented the car where the springs and pennies rest when the hatch is shut.

As far as the weight goes it is for vibration dampening. I took mine out of the 350 and put it back in a week later as I was getting weird hatch noises until I replaced it.

kdo2milger · 09-20-2009, 07:03 PM

Quote:

Originally Posted by Kirkster

you may want to be careful adding more than 3 pennies as some 350Z owners that went to 4 pennies dented the car where the springs and pennies rest when the hatch is shut.

As far as the weight goes it is for vibration dampening. I took mine out of the 350 and put it back in a week later as I was getting weird hatch noises until I replaced it.

i still have three on each side, i havent gone to four pennies because i read the same thing about 4 being too much over there on the 350 site...

and i dont plan to remove the vibration dampener either...

Trips · 09-20-2009, 07:07 PM

I stopped having this issues a while back the dealer replaced the dampeners

kdo2milger · 09-20-2009, 07:09 PM

Quote:

Originally Posted by Triple's

I stopped having this issues a while back the dealer replaced the dampeners

i wish my dealer would...they wont touch it until a tsb is released and i aint coughing up 68 bucks for em...

Trips · 09-20-2009, 07:12 PM

try a six pack of Corona's it never fails.

vipor · 09-21-2009, 01:24 AM

I recently went a visited a dealer (not the one I got my car from) about this issue. I spoke with someone and explained the situation and showed her a printout showing the new part number and part compared to the stock part. They seemed willing to help and had to bring the car into the shop to have a tech look at it. The tech agreed that it was an issue and we discussed what could the done. Talking to a guy at the parts desk I found that the replacement part shown in the post has actually been replaced as well, although I am unsure what was changed. Now the fun part... evidently noone I was dealing with knew about the Nismo Z and they started giving me a hard time about my "aftermarket" spoiler. I told them it was a Nismo spoiler and they immediately changed tune stating "yeah, it's a Nismo part, but it didn't come on the car." I sent the woman off to her manager and she returned less than a minute later understanding what I was trying to tell her. I now have an appointment next week some time to get the "springs" swapped out along with a nice well-needed hand washing. It took a little time and talking to the right people, but it looks like all will be well soon. Also, they came at me with the TSB for the 350Z stating that there wasntb one for the 370, but I kept pushing and they understood. Going in with all of the necessary information including part numbers definitely helped me get the dealer on my side, so when you go in, be prepared. Once I know the new-new part number I'll let you all know.

kdo2milger · 09-21-2009, 01:29 AM

Quote:

Originally Posted by vipor

I recently went a visited a dealer (not the one I got my car from) about this issue. I spoke with someone and explained the situation and showed her a printout showing the new part number and part compared to the stock part. They seemed willing to help and had to bring the car into the shop to have a tech look at it. The tech agreed that it was an issue and we discussed what could the done. Talking to a guy at the parts desk I found that the replacement part shown in the post has actually been replaced as well, although I am unsure what was changed. Now the fun part... evidently noone I was dealing with knew about the Nismo Z and they started giving me a hard time about my "aftermarket" spoiler. I told them it was a Nismo spoiler and they immediately changed tune stating "yeah, it's a Nismo part, but it didn't come on the car." I sent the woman off to her manager and she returned less than a minute later understanding what I was trying to tell her. I now have an appointment next week some time to get the "springs" swapped out along with a nice well-needed hand washing. It took a little time and talking to the right people, but it looks like all will be well soon. Also, they came at me with the TSB for the 350Z stating that there wasntb one for the 370, but I kept pushing and they understood. Going in with all of the necessary information including part numbers definitely helped me get the dealer on my side, so when you go in, be prepared. Once I know the new-new part number I'll let you all know.

good for you

let us know what they say about this new pn...

GTRFAN · 09-21-2009, 03:59 AM

I picked up my replacement hatch springs today. Works perfectly now! I got them free under warranty. The service manager said there is an official bulletin coming out for the 370z soon for this issue so it was easy for him to get the part approved. (Australia)

kdo2milger · 09-21-2009, 12:39 PM

Quote:

Originally Posted by GTRFAN

I picked up my replacement hatch springs today. Works perfectly now! I got them free under warranty. The service manager said there is an official bulletin coming out for the 370z soon for this issue so it was easy for him to get the part approved. (Australia)

WoW!

nice

so the official bulletin, is a release for all of nissan or just in Australia?

billydsz · 09-23-2009, 03:13 PM

Well you can downgrade my hatch to near 100% failure now. With just a touch over 1200 miles (she's broken in!) my hatch fails to open almost all the time. When I bring it in for the first service I will get it resolved.

kdo2milger · 09-30-2009, 09:44 AM

Update: i havent had any more problems other than the one time with the three pennies...

i will follow up with my Nissan Dealership this week to see if there has been a TSB released or when/if it will...

ZeeRay · 09-30-2009, 09:54 AM

On the phone right now! Going to dealer later. One of my springs(drivers side) is loose and nearly falls out on it's own as it is.

vipor · 09-30-2009, 10:50 AM

Initially I had about a 75% success rate when popping my hatch and thought little about it. About a month or so ago I was working on some projects around the house and it seemed more like 0%. It was hotter (than now) and was getting a lot more use. I'm at the dealer right now getting the springs replaced and I go to show the new service tech and it worked 2 out of 2 times, lol.

View Poll Results: Does your rear hatch get stuck?
YES (ALL THE TIME!!!)	403	38.82%
YES (Sometime)	452	43.55%
NO (Never!)	183	17.63%
Voters: 1038. You may not vote on this poll

09-20-2009, 07:07 PM	#80 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	I stopped having this issues a while back the dealer replaced the dampeners __________________

09-20-2009, 07:12 PM	#82 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	try a six pack of Corona's it never fails. __________________

09-21-2009, 01:24 AM	#83 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	I recently went a visited a dealer (not the one I got my car from) about this issue. I spoke with someone and explained the situation and showed her a printout showing the new part number and part compared to the stock part. They seemed willing to help and had to bring the car into the shop to have a tech look at it. The tech agreed that it was an issue and we discussed what could the done. Talking to a guy at the parts desk I found that the replacement part shown in the post has actually been replaced as well, although I am unsure what was changed. Now the fun part... evidently noone I was dealing with knew about the Nismo Z and they started giving me a hard time about my "aftermarket" spoiler. I told them it was a Nismo spoiler and they immediately changed tune stating "yeah, it's a Nismo part, but it didn't come on the car." I sent the woman off to her manager and she returned less than a minute later understanding what I was trying to tell her. I now have an appointment next week some time to get the "springs" swapped out along with a nice well-needed hand washing. It took a little time and talking to the right people, but it looks like all will be well soon. Also, they came at me with the TSB for the 350Z stating that there wasntb one for the 370, but I kept pushing and they understood. Going in with all of the necessary information including part numbers definitely helped me get the dealer on my side, so when you go in, be prepared. Once I know the new-new part number I'll let you all know. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers Last edited by vipor; 09-21-2009 at 01:26 AM. Reason: Hard to type real well on an iPhone.

09-21-2009, 03:59 AM	#85 (permalink)
GTRFAN Track Member Join Date: Dec 2008 Location: Melbourne Posts: 586 Drives: 370z Titanium 6MT Rep Power: 18	I picked up my replacement hatch springs today. Works perfectly now! I got them free under warranty. The service manager said there is an official bulletin coming out for the 370z soon for this issue so it was easy for him to get the part approved. (Australia) __________________ My Zed

09-20-2009, 02:38 PM	#76 (permalink)
jbbrann Base Member Join Date: Mar 2009 Location: Arkansas Posts: 68 Drives: 09 370Z Sport Rep Power: 280	I removed the weight that is on the hatch near the latch underneath the trim. It seemed to fix the issue for me (for now) and the hatch doesn't really seem any more difficult to close.

09-20-2009, 06:57 PM	#78 (permalink)
Kirkster A True Z Fanatic Join Date: Dec 2008 Location: Peoples Republic of MD Posts: 1,792 Drives: Roadster of DOOM Rep Power: 20	you may want to be careful adding more than 3 pennies as some 350Z owners that went to 4 pennies dented the car where the springs and pennies rest when the hatch is shut. As far as the weight goes it is for vibration dampening. I took mine out of the 350 and put it back in a week later as I was getting weird hatch noises until I replaced it.

09-23-2009, 03:13 PM	#87 (permalink)
billydsz Enthusiast Member Join Date: Aug 2009 Location: New Bern Posts: 252 Drives: 9 370z SptCp SRd 7AT Rep Power: 16	Well you can downgrade my hatch to near 100% failure now. With just a touch over 1200 miles (she's broken in!) my hatch fails to open almost all the time. When I bring it in for the first service I will get it resolved.

09-30-2009, 09:44 AM	#88 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 59	Update: i havent had any more problems other than the one time with the three pennies... i will follow up with my Nissan Dealership this week to see if there has been a TSB released or when/if it will... __________________ Project *NISMO*

09-30-2009, 09:54 AM	#89 (permalink)
ZeeRay Base Member Join Date: Sep 2009 Location: Lawton, Ok Posts: 51 Drives: 370Z and a Corvette Rep Power: 16	On the phone right now! Going to dealer later. One of my springs(drivers side) is loose and nearly falls out on it's own as it is.

09-30-2009, 10:50 AM	#90 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	Initially I had about a 75% success rate when popping my hatch and thought little about it. About a month or so ago I was working on some projects around the house and it seemed more like 0%. It was hotter (than now) and was getting a lot more use. I'm at the dealer right now getting the springs replaced and I go to show the new service tech and it worked 2 out of 2 times, lol. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5Zigen Proracer SP 370Z NEW RELEASE!	INTENSEPOWER	Exhaust/Intake	191	05-26-2013 11:46 AM
Stuck hatch...	Premo34WV	Exterior & Interior	38	01-30-2010 10:14 PM
Edmunds test car stuck in a gear	dancetracks	Nissan 370Z General Discussions	8	07-15-2009 10:05 PM
370Z Roadster Release	devon1cb	Nissan 370Z Roadster (Convertible)	2	06-05-2009 10:28 AM
370z Hatch Struts!	SocalBurt	Exterior & Interior	18	01-30-2009 06:25 PM