Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs (http://www.the370z.com/nissan-370z-warranty-scheduled-maintenance-servicing-repairs/)
-   -   !!For 370Z Owners with the Stuck Hatch Release Issue!! (http://www.the370z.com/nissan-370z-warranty-scheduled-maintenance-servicing-repairs/7681-370z-owners-stuck-hatch-release-issue.html)

BasementBobby 03-26-2016 08:57 AM

mine gets stuck 90% of the time and I have a base 09 (no wing). I have to press mine 2-3 sometimes 4 times in order to open my trunk.

DeliriousClam 04-06-2016 05:50 PM

Finally found a way to fix mine cheaply and now it pops open every single time even with all the dynamat I placed in the top of the hatch. I glued 1/4" thick rubber washers to where the springs meet on either side of the hatch.

http://i207.photobucket.com/albums/b...0406161751.jpg

cv129 04-10-2016 12:33 PM

^ i used to do something similar. I used those thick clear plastic tabs for cabinet doors and chair/table legs. But they always slowly wiggle out of alignment. What glue did you use?

DeliriousClam 04-10-2016 03:02 PM

Quote:

Originally Posted by cv129 (Post 3455918)
^ i used to do something similar. I used those thick clear plastic tabs for cabinet doors and chair/table legs. But they always slowly wiggle out of alignment. What glue did you use?

http://www.amazon.com/15g-Gorilla-Su...super+glue+gel

Bitches aint going anywhere

Uxi 04-18-2016 01:21 PM

I did a 180 degree turn on one of the springs and that seemed to have fixed it.

david81968 05-25-2016 02:54 PM

My NISMO is only 3 months old and already I've been to the dealership twice for the hatch issue. They replaced the springs...still didn't work. I put a nickel in each rubber boot. Still didn't work. I removed the weight in the hatch (under plastic panel). Still not better. Took back to dealer today and the service guy told me that there is nothing more they can do. It is a design flaw that Nissan never fixed. He says most of the new Z's on the lot are the same way. I'm somewhat pissed. I frequently use my hatch and have to use both hands to open it, which means I have to set things on the ground first. I think I might try the rubber washer and glue trick.

Wheels3309 05-26-2016 12:28 PM

I don't know exactly why, but turning the springs about .25-.5 turns until it felt tighter seems to have cured my problem. Opens every time with 1 pop for the last 2 months


Sent from my iPhone using Tapatalk

david81968 05-26-2016 12:30 PM

Wheels3309, There is a small green dot on the end of the boot. Do you know which direction you have it pointing?

Wheels3309 05-26-2016 12:54 PM

Just went out and looked... For the life of me I can't find any green dot!


Sent from my iPhone using Tapatalk

SouthArk370Z 05-26-2016 01:20 PM

Quote:

Originally Posted by david81968 (Post 3487513)
Wheels3309, There is a small green dot on the end of the boot. Do you know which direction you have it pointing?

IIRC, the boot is free to turn in the plastic piece that screws into the hatch, so any mark on it would probably not be for alignment.

david81968 05-26-2016 01:28 PM

Mine are warranty replacements from dealership. Maybe they mark them differently. Thanks for checking! I'll play around and see if readjusting them makes any difference.

DeliriousClam 05-26-2016 02:14 PM

Just gonna say I'm closing in on two months and it still works perfectly

david81968 06-02-2016 03:23 PM

Update: I found a fix. I added another nickel to each side in boot and it works. So I got it fixed for $.20. It has been 3 days now and works every time!

david81968 06-14-2016 10:34 AM

2nd Update: Even with 2 nickels, it stopped popping open after 1 week.

Wheels3309 06-14-2016 03:40 PM

Quote:

Originally Posted by david81968 (Post 3497986)
2nd Update: Even with 2 nickels, it stopped popping open after 1 week.

well.... :wtf:


All times are GMT -5. The time now is 08:22 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2