U0164 Error code

swoopdeville · 06-10-2013, 08:39 AM

I have a service engine soon light with an associated error code of u0164. I have seen a few posts concerning this which all say its a CAN communications error but I haven't seen any resolutions to the issue. The service manual seems to point to a communications error as well between the HVAC control module and the DTC. I have replaced the HVAC control module but the light has returned. My AC was working with no issues until recently, now it doesn't work all the time, sometimes it blows warm air but I think I hear the AC compressor click on. Anyone have any ideas of what to look at next? Its a 2009 Base model with 32K miles. Unfortunately the light came on about a week after the warranty expired based on time so if I take it to the dealer I will have to pay some $$$.

SouthArk370Z · 06-10-2013, 08:57 AM

That is a timeout error for CAN communications. Check all CAN bus wiring between BCM, HVAC, and Combination Meter. If it's not wiring, it's probably a bad module.

Nism0 · 12-04-2013, 07:17 PM

Friend having the same problem. Did you ever get it fixed OP?

Jordo! · 12-04-2013, 07:21 PM

Quote:

Originally Posted by SouthArk370Z

That is a timeout error for CAN communications. Check all CAN bus wiring between BCM, HVAC, and Combination Meter. If it's not wiring, it's probably a bad module.

Could also be a blown fuse, I should think.

Nism0 · 12-04-2013, 07:26 PM

My friends car now has no communication to the HVAC controls, heated seats, cruise control, home link mirror, and outside temp reading is way off.

We tried swapping out the white box under the radio. We tried swapping out the face plate to the head unit. He installed a new rely behind the navi. He also changed all the 25 and 10 amp fuses in the fuse box under the steering wheel and both boxes in the engine bay. He did find some blown fuses in the engine bay boxes.

We are totally lost at this point. What could we be missing??

Jordo! · 12-04-2013, 07:44 PM

Quote:

Originally Posted by Nism0

My friends car now has no communication to the HVAC controls, heated seats, cruise control, home link mirror, and outside temp reading is way off.

We tried swapping out the white box under the radio. We tried swapping out the face plate to the head unit. He installed a new rely behind the navi. He also changed all the 25 and 10 amp fuses in the fuse box under the steering wheel and both boxes in the engine bay. He did find some blown fuses in the engine bay boxes.

We are totally lost at this point. What could we be missing??

See if you can find out what was causing the fuses to blow -- that sounds like the source of the problem.

Nism0 · 12-04-2013, 09:33 PM

We tried plugging his radar detector into the home link mirror and must have cross the positive and negative. And ever since then he's had these problems.

Nism0 · 12-12-2013, 12:52 PM

Anyone?

SouthArk370Z · 12-12-2013, 01:47 PM

Download the FSM (link in my sig) for CAN bus troubleshooting procedures. Eliminate parts of the system as being the problem and what you have left must be it. I'm guessing you have a bad BCM or HVAC module; maybe just a bad wire/connector.

Nism0 · 12-14-2013, 02:11 PM

Thanks I'll give it a try.

Zensation · 12-14-2013, 11:39 PM

Check out the body control module? Just a thought. Its located down at the passengers right foot behid the plastic panel there. Everything in the dash basically plus in there.

Nism0 · 12-15-2013, 12:34 PM

Yea we will give that a look over. I have a few thing to try. I'll post back here if I have any luck or not. Thanks everyone.

DEpointfive0 · 09-02-2015, 10:48 AM

I got this CEL, but I have a weird symptom.
My info gauge is in U.S. units. BUT my temp shows as Celsius...

zefaulter · 09-08-2015, 08:48 PM

Im getting this too now, I just replaced my HU so there might be something I messed up

Edit: nvm I cleared it

ngkhatu · 07-23-2016, 07:29 PM

I was told this code doesn't clear by itself, so we have to clear the code or they also told me to disconnect the battery for a few mins. I'm seeing this error right now. The light came on when I was trying to write some computer code to pull data from the OB2 interface. I had this on while I turned the engine on.

Terrible idea, probably introduced errors on the interface. So hopefully this reset works. I don't seem to be having any hvac issues.

06-10-2013, 08:39 AM	#1 (permalink)
swoopdeville Base Member Join Date: Apr 2013 Location: Charlottesville, VA Posts: 19 Drives: '09 Black 6MT Base Rep Power: 12	U0164 Error code I have a service engine soon light with an associated error code of u0164. I have seen a few posts concerning this which all say its a CAN communications error but I haven't seen any resolutions to the issue. The service manual seems to point to a communications error as well between the HVAC control module and the DTC. I have replaced the HVAC control module but the light has returned. My AC was working with no issues until recently, now it doesn't work all the time, sometimes it blows warm air but I think I hear the AC compressor click on. Anyone have any ideas of what to look at next? Its a 2009 Base model with 32K miles. Unfortunately the light came on about a week after the warranty expired based on time so if I take it to the dealer I will have to pay some $$$.

06-10-2013, 08:57 AM	#2 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	That is a timeout error for CAN communications. Check all CAN bus wiring between BCM, HVAC, and Combination Meter. If it's not wiring, it's probably a bad module. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

12-04-2013, 07:17 PM	#3 (permalink)
Nism0 Enthusiast Member Join Date: Jan 2012 Location: North Carolina Posts: 405 Drives: '19 Nismo Tech Rep Power: 13	Friend having the same problem. Did you ever get it fixed OP? __________________ '08 350z Enthusiast '10 370z 40th Anniversary '19 370z Nismo Tech

12-04-2013, 07:26 PM	#5 (permalink)
Nism0 Enthusiast Member Join Date: Jan 2012 Location: North Carolina Posts: 405 Drives: '19 Nismo Tech Rep Power: 13	My friends car now has no communication to the HVAC controls, heated seats, cruise control, home link mirror, and outside temp reading is way off. We tried swapping out the white box under the radio. We tried swapping out the face plate to the head unit. He installed a new rely behind the navi. He also changed all the 25 and 10 amp fuses in the fuse box under the steering wheel and both boxes in the engine bay. He did find some blown fuses in the engine bay boxes. We are totally lost at this point. What could we be missing?? __________________ '08 350z Enthusiast '10 370z 40th Anniversary '19 370z Nismo Tech

12-04-2013, 09:33 PM	#7 (permalink)
Nism0 Enthusiast Member Join Date: Jan 2012 Location: North Carolina Posts: 405 Drives: '19 Nismo Tech Rep Power: 13	We tried plugging his radar detector into the home link mirror and must have cross the positive and negative. And ever since then he's had these problems. __________________ '08 350z Enthusiast '10 370z 40th Anniversary '19 370z Nismo Tech

12-12-2013, 12:52 PM	#8 (permalink)
Nism0 Enthusiast Member Join Date: Jan 2012 Location: North Carolina Posts: 405 Drives: '19 Nismo Tech Rep Power: 13	Anyone? __________________ '08 350z Enthusiast '10 370z 40th Anniversary '19 370z Nismo Tech

12-12-2013, 01:47 PM	#9 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Download the FSM (link in my sig) for CAN bus troubleshooting procedures. Eliminate parts of the system as being the problem and what you have left must be it. I'm guessing you have a bad BCM or HVAC module; maybe just a bad wire/connector. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

12-14-2013, 02:11 PM	#10 (permalink)
Nism0 Enthusiast Member Join Date: Jan 2012 Location: North Carolina Posts: 405 Drives: '19 Nismo Tech Rep Power: 13	Thanks I'll give it a try. __________________ '08 350z Enthusiast '10 370z 40th Anniversary '19 370z Nismo Tech

12-14-2013, 11:39 PM	#11 (permalink)
Zensation Enthusiast Member Join Date: Jun 2012 Location: Spartanburg, Sc Age: 35 Posts: 483 Drives: 93 rx7 Rep Power: 13	Check out the body control module? Just a thought. Its located down at the passengers right foot behid the plastic panel there. Everything in the dash basically plus in there. __________________ 370z NISMO 0675 327 rwhp 280 rwtq - sold. FD RX7 single turbo 508hp - sold. Lexus IS-F 5.0L V8

12-15-2013, 12:34 PM	#12 (permalink)
Nism0 Enthusiast Member Join Date: Jan 2012 Location: North Carolina Posts: 405 Drives: '19 Nismo Tech Rep Power: 13	Yea we will give that a look over. I have a few thing to try. I'll post back here if I have any luck or not. Thanks everyone. __________________ '08 350z Enthusiast '10 370z 40th Anniversary '19 370z Nismo Tech

09-02-2015, 10:48 AM	#13 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	I got this CEL, but I have a weird symptom. My info gauge is in U.S. units. BUT my temp shows as Celsius... __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

09-08-2015, 08:48 PM	#14 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27	Im getting this too now, I just replaced my HU so there might be something I messed up Edit: nvm I cleared it Last edited by zefaulter; 09-08-2015 at 09:23 PM.

07-23-2016, 07:29 PM	#15 (permalink)
ngkhatu Base Member Join Date: Oct 2014 Location: Raleigh, NC Posts: 3 Drives: 10 370Z Conv Silv A7 Rep Power: 11	I was told this code doesn't clear by itself, so we have to clear the code or they also told me to disconnect the battery for a few mins. I'm seeing this error right now. The light came on when I was trying to write some computer code to pull data from the OB2 interface. I had this on while I turned the engine on. Terrible idea, probably introduced errors on the interface. So hopefully this reset works. I don't seem to be having any hvac issues.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CEL On U0164	kholy	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	5	12-04-2013 07:17 PM
09 370z stillen gen 3 error code P0300????	1littlekerr	Tuning	12	07-10-2013 06:50 PM
error code after motorydne	roy'sz	Tuning	15	04-08-2013 12:23 AM
Error Code P0605 Internal Control Module Read Only Memory (ROM) Error	Fearless_Z	Tuning	3	02-10-2013 08:35 AM
Help! Stillen G3 error!!	Unique_Z	Nissan 370Z General Discussions	33	02-16-2012 09:25 PM