Cleaning throttle bodies

370Z JT · 06-20-2013, 01:31 AM

I cleaned my tbs off the manifold when I installed the m370. Had no issues after.

JAYNO20 · 06-20-2013, 02:57 AM

Quote:

Originally Posted by 370Z JT

I cleaned my tbs off the manifold when I installed the m370. Had no issues after.

You took them completely off the car?

wstar · 06-20-2013, 03:15 PM

He had to, yes. The M370 doesn't come with new throttle bodies. You take them off the old manifold and put them on the new. I went back and forth like 4 times

synolimit · 06-21-2013, 12:37 AM

Has anyone deleted the hose on the intake tube? How dirty does that hose get vs the hose going from the PCV to the manifold?

wstar · 06-21-2013, 08:26 AM

You mean the baffled hoses that go from the valve covers to the intake tubes just a bit before the throttle bodies? Those are the fresh-air breathers for the crank-case, you need them to exist in some form or other.

JAYNO20 · 06-22-2013, 12:07 AM

So is everyone in agreement that the relearn has to be done after cleaning these?

wstar · 06-22-2013, 02:19 AM

I doubt it *needs* to be done. The air volume and flow rate is only being changed by a tiny percentage by cleaning them. It doesn't hurt, though.

Baer383 · 06-22-2013, 09:20 AM

It needs to be done if you disconnected the wires that are connected to it.

JAYNO20 · 06-23-2013, 01:27 AM

Did this today. Car has 20k miles on it and the throttle bodies were filthy. Did the resets and everything seems to be ok.

synolimit · 06-23-2013, 06:57 PM

Quote:

Originally Posted by JAYNO20

Did this today. Car has 20k miles on it and the throttle bodies were filthy. Did the resets and everything seems to be ok.

Really. How dirty is the hose going to the intake tubes? I take you don't have a catch can.

JAYNO20 · 06-23-2013, 07:14 PM

No catch cans. The tubes going from the intakes weren't dirty at all.

synolimit · 06-23-2013, 08:00 PM

Quote:

Originally Posted by JAYNO20

No catch cans. The tubes going from the intakes weren't dirty at all.

Hmm. So those tubes must suck since theyre attached to the manifold in a away but so are the TB. Surprised blow by backs up that much to dirty the TB. If you get a CC you won't have to deal with that anymore.

wstar · 06-24-2013, 01:52 PM

The PCV tubes that go from the head covers to the intake tubes (just in front of the TBs) are fresh air breathers that normally flow into the crankcase, not out into the intake tract. There can be odd reverse pressure conditions and/or backfires through them, but they also have some baffling to reduce that. Most of the fouling comes straight up out of the intake manifold itself.

synolimit · 06-24-2013, 04:51 PM

Quote:

Originally Posted by wstar

The PCV tubes that go from the head covers to the intake tubes (just in front of the TBs) are fresh air breathers that normally flow into the crankcase, not out into the intake tract. There can be odd reverse pressure conditions and/or backfires through them, but they also have some baffling to reduce that. Most of the fouling comes straight up out of the intake manifold itself.

Well they cant be pcv tubes since those are the hoses attached to the pcv going to the manifold. I at least wouldn't call them that. Anywho how would they flow into the crank case when the hose is attached to the intake tube? The intake tube is a giant vacuum cleaner sucking air out of those hoses. The intake sucks, it doesn't blow. Only way to over come the intakes vacuum is to have those lines going to the manifold which they do through all the hose work, valve covers, PCV etc. The manifold sucks air through the crank through all those lines. It's just more powerful than the TB's suction.

Hmmm I'd have to doubt that a little. Blow by coming up from the piston rings, out the valves, and into the manifold seems a little far fetched with a system that brings air in, not out. Since I've seen so much oil in the PCV hoses I'm going to say most of the fouling comes from them, not straight up and out the manifold.

wstar · 06-24-2013, 08:45 PM

They are, in fact, PCV-related. The PCV system has two lines (per side of the engine in our case). There's a vacuum line that goes from the intake manifold to the crankcase, which puts negative pressure on the crankcase and sucks out crankcase fumes via engine vacuum. That's the one you typically put a catch can on to get most of the nasty stuff. Then there's another line which is fresh air delivery to replace what that line sucks out. It's the fatter, baffled stock hose that attaches to the side of the main air intake tube.

06-20-2013, 01:31 AM	#16 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 379	I cleaned my tbs off the manifold when I installed the m370. Had no issues after. KeVoH likes this. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

06-20-2013, 03:15 PM	#18 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	He had to, yes. The M370 doesn't come with new throttle bodies. You take them off the old manifold and put them on the new. I went back and forth like 4 times __________________ 7AT Track Car! Journal thread / Car setup details

06-21-2013, 12:37 AM	#19 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3390	Has anyone deleted the hose on the intake tube? How dirty does that hose get vs the hose going from the PCV to the manifold? __________________ 13 370z-

06-21-2013, 08:26 AM	#20 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	You mean the baffled hoses that go from the valve covers to the intake tubes just a bit before the throttle bodies? Those are the fresh-air breathers for the crank-case, you need them to exist in some form or other. __________________ 7AT Track Car! Journal thread / Car setup details

06-22-2013, 12:07 AM	#21 (permalink)
JAYNO20 Track Member Join Date: Mar 2012 Location: Pittsburgh, PA Posts: 802 Drives: 2010 370Z Nismo Rep Power: 15	So is everyone in agreement that the relearn has to be done after cleaning these? __________________ 2010 Solid Red NISMO #0334 - SOLD 2014 Red Hot Camaro ZL1

06-22-2013, 02:19 AM	#22 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	I doubt it needs to be done. The air volume and flow rate is only being changed by a tiny percentage by cleaning them. It doesn't hurt, though. __________________ 7AT Track Car! Journal thread / Car setup details

06-22-2013, 09:20 AM	#23 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	It needs to be done if you disconnected the wires that are connected to it. __________________ 2013 ZL1 754 rwhp 747 rwtq

06-23-2013, 01:27 AM	#24 (permalink)
JAYNO20 Track Member Join Date: Mar 2012 Location: Pittsburgh, PA Posts: 802 Drives: 2010 370Z Nismo Rep Power: 15	Did this today. Car has 20k miles on it and the throttle bodies were filthy. Did the resets and everything seems to be ok. __________________ 2010 Solid Red NISMO #0334 - SOLD 2014 Red Hot Camaro ZL1

06-23-2013, 07:14 PM	#26 (permalink)
JAYNO20 Track Member Join Date: Mar 2012 Location: Pittsburgh, PA Posts: 802 Drives: 2010 370Z Nismo Rep Power: 15	No catch cans. The tubes going from the intakes weren't dirty at all. __________________ 2010 Solid Red NISMO #0334 - SOLD 2014 Red Hot Camaro ZL1

06-24-2013, 01:52 PM	#28 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	The PCV tubes that go from the head covers to the intake tubes (just in front of the TBs) are fresh air breathers that normally flow into the crankcase, not out into the intake tract. There can be odd reverse pressure conditions and/or backfires through them, but they also have some baffling to reduce that. Most of the fouling comes straight up out of the intake manifold itself. __________________ 7AT Track Car! Journal thread / Car setup details

06-24-2013, 08:45 PM	#30 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	They are, in fact, PCV-related. The PCV system has two lines (per side of the engine in our case). There's a vacuum line that goes from the intake manifold to the crankcase, which puts negative pressure on the crankcase and sucks out crankcase fumes via engine vacuum. That's the one you typically put a catch can on to get most of the nasty stuff. Then there's another line which is fresh air delivery to replace what that line sucks out. It's the fatter, baffled stock hose that attaches to the side of the main air intake tube. __________________ 7AT Track Car! Journal thread / Car setup details Last edited by wstar; 06-24-2013 at 09:33 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Larger Throttle bodies...?	TypeOne	Intake/Exhaust	24	11-16-2015 12:42 PM
Nissan 370Z: Eliminating hot coolant heater hoses on both throttle bodies	VQ37VHR-K28	DIY Section (Do-It-Yourself)	15	09-03-2015 01:30 PM
High flow throttle bodies	pokeyl	Intake/Exhaust	11	12-16-2011 04:33 PM
Impul Throttle Bodies	370Ztune	Engine & Drivetrain	6	05-25-2009 03:33 AM
Intake manifold / throttle bodies	wstar	Engine & Drivetrain	14	04-15-2009 10:55 AM