Can't go past 2500 RPM! Help!

Corona370z · 03-20-2011, 09:45 AM

Just wanna thank everyone for the input. Decided to just reset the ECU by disconnecting the battery for 15 min as I ate. It all works great!

cfweber · 03-20-2011, 10:39 AM

so this was an oil temp issue?

V8Killer · 03-20-2011, 10:44 AM

Quote:

Originally Posted by Corona370z

Just wanna thank everyone for the input. Decided to just reset the ECU by disconnecting the battery for 15 min as I ate. It all works great!

I would still check your intakes to make sure nothing got sucked up in there.

ChrisSlicks · 03-20-2011, 10:54 AM

Quote:

Originally Posted by cfweber

so this was an oil temp issue?

No. Sounds like the car went into a protection mode due to a faulty reading from probably the MAF. Seems to happen on rare occasion when people bring the car out of hibernation for the first time. 90% of the time an ECU reset makes the problem go away. It would have been good to read the code just to see what it was complaining about. A simple code reader is cheap and good to have around.

quagmire87 · 05-23-2011, 09:54 PM

It happen to me at 3500 rpms and at 2500 rpms I disconected the battery and it was fine at first. I just took it to the dealer and let them deal with it got to love buying a warranty 7 years or 120,000 miles!

quagmire87 · 05-27-2011, 12:24 AM

Update on mine So they have to take the engine apart and fix the moving plate. It will take them a week and I get a rental. Also it will be cover by warranty.

ChrisSlicks · 05-27-2011, 07:35 AM

Quote:

Originally Posted by quagmire87

Update on mine So they have to take the engine apart and fix the moving plate. It will take them a week and I get a rental. Also it will be cover by warranty.

What is the "moving plate" exactly?

quagmire87 · 05-28-2011, 11:44 AM

The dealership said that it was in front of the engine and that it was a metal plate that was causing the problem of not passing the 2500rpms. I also asked them if it was going on limp mode and they said yes so I don't think it wasn't the gas cap issue or a leak. I don't know what it is either but once I have any updates or anything. All the papers and repair cost I will post it here.

quagmire87 · 06-07-2011, 02:35 AM

Alright I'm back with an update on my z. So the total for the repair was $1,902.30 all covered by warranty. This is what the technician said in his notes "veryfied service engine soon light
Checked for codes found code p0011 intake timing control b1. Ran confirmation test, failed. Checked oil pressure - low because low on oil. Called the tech line was told to replace both intakes sprockets. R&r front timing cover and found b1 intake symol plate slipped
replaced both gears- ok."

They also gave me a rental. The z feels way better now.

ChrisSlicks · 06-07-2011, 07:07 AM

Sounds like your timing gear jumped a tooth, not sure how that happens.

juld0zer · 06-11-2014, 11:45 PM

Quagmire - did your motor refuse to rev past 3500/2500rpm in all conditions after it first happened? Or did the problem only appear when the engine was warmed up?

03-20-2011, 09:45 AM	#16 (permalink)
Corona370z Enthusiast Member Join Date: Aug 2010 Location: Ewa Beach, HI Age: 36 Posts: 416 Drives: Naked on sunny days Rep Power: 15	Just wanna thank everyone for the input. Decided to just reset the ECU by disconnecting the battery for 15 min as I ate. It all works great! __________________ Stillen Intake, ARK Exhaust. Hopefully in the near future: Tanabe GF210 Lowering Springs, Hotchkis Sway Bars, Motordyne M370 Intake Manifold.

03-20-2011, 10:39 AM	#17 (permalink)
cfweber Enthusiast Member Join Date: Jun 2010 Location: Independence Posts: 388 Drives: 10 370Z BS 6 SP Rep Power: 15	lessons learned? so this was an oil temp issue?

06-07-2011, 07:07 AM	#25 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Sounds like your timing gear jumped a tooth, not sure how that happens. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RPM cut at 2500??? What's wrong with this??	sinigami24	Engine & Drivetrain	3	06-13-2014 09:17 PM
Most bizarre thing happen to me today! Unable to Rev past 2500 RPM!	AK370Z	Nissan 370Z General Discussions	84	04-13-2012 08:46 PM
09 Nissan GTR rims, $2500, So.cal Encino 91316	R390	Tires/Wheels	5	01-07-2011 11:44 AM
FS:WORK VSKF Chrome 20x9+20x10 $2500	VIP-STATUS	Parts for sale (Private Classifieds)	0	04-30-2010 07:57 PM
370z nismo full exhaust, as new, 2500 miles, $850 shipped	400hpmarauder	Parts for sale (Private Classifieds)	17	03-08-2010 07:25 PM

05-23-2011, 09:54 PM	#20 (permalink)
quagmire87 Enthusiast Member Join Date: Oct 2009 Location: chicago illinois Posts: 428 Drives: 09 370z Bs Mt Rep Power: 16	It happen to me at 3500 rpms and at 2500 rpms I disconected the battery and it was fine at first. I just took it to the dealer and let them deal with it got to love buying a warranty 7 years or 120,000 miles!

05-27-2011, 12:24 AM	#21 (permalink)
quagmire87 Enthusiast Member Join Date: Oct 2009 Location: chicago illinois Posts: 428 Drives: 09 370z Bs Mt Rep Power: 16	Update on mine So they have to take the engine apart and fix the moving plate. It will take them a week and I get a rental. Also it will be cover by warranty.

05-28-2011, 11:44 AM	#23 (permalink)
quagmire87 Enthusiast Member Join Date: Oct 2009 Location: chicago illinois Posts: 428 Drives: 09 370z Bs Mt Rep Power: 16	The dealership said that it was in front of the engine and that it was a metal plate that was causing the problem of not passing the 2500rpms. I also asked them if it was going on limp mode and they said yes so I don't think it wasn't the gas cap issue or a leak. I don't know what it is either but once I have any updates or anything. All the papers and repair cost I will post it here.

06-07-2011, 02:35 AM	#24 (permalink)
quagmire87 Enthusiast Member Join Date: Oct 2009 Location: chicago illinois Posts: 428 Drives: 09 370z Bs Mt Rep Power: 16	Alright I'm back with an update on my z. So the total for the repair was $1,902.30 all covered by warranty. This is what the technician said in his notes "veryfied service engine soon light Checked for codes found code p0011 intake timing control b1. Ran confirmation test, failed. Checked oil pressure - low because low on oil. Called the tech line was told to replace both intakes sprockets. R&r front timing cover and found b1 intake symol plate slipped replaced both gears- ok." They also gave me a rental. The z feels way better now.

06-11-2014, 11:45 PM	#26 (permalink)
juld0zer Enthusiast Member Join Date: Nov 2012 Location: Sydney Posts: 428 Drives: 11 Nissan 370Z MB M6 Rep Power: 139	Quagmire - did your motor refuse to rev past 3500/2500rpm in all conditions after it first happened? Or did the problem only appear when the engine was warmed up?