SRS Airbag Front Crash Sensor Fault

CrazyZed · 06-08-2020, 04:44 PM

Hello fellow 370Z Enthusiasts!

I own a 2016 Z that had been in an accident that damaged the wire that leads to the front crash sensor in the engine bay. The wire damage was right behind the passenger headlight.

The blinking SRS Dash Light, when put into diagnostics mode, displays two 3 second flashes followed by one quick flash. (The indication of a Front Crash Sensor Fault)

Judging from this I attempted to cut out the damaged SRS wire, (after having cut the outer plastic wiring tube and pulled it away from the other wires), and I took a new connector and sensor and butt-spliced them to the remaining wire. (This is a shielded SRS cable and has a ground wire)

But I'm still getting the same Dash Light Sequence showing the front crash sensor fault.

Are there any knowledgeable persons who might be willing to help with advice on how to remedy this problem? Can the wire be successfully spliced? Could the fault actually be somewhere else?

SouthArk370Z · 06-08-2020, 05:38 PM

There may be a reset procedure in the FSM. Link in sig.

gryghst · 06-08-2020, 05:48 PM

You may need to have the air bag control module cleared. I had to replace the front crash sensor on a 350z. I then sent out the air bag control module to be cleared. I found a number of places on line that would do it wit a 2 day turnaround.

CrazyZed · 06-10-2020, 03:53 PM

Had the SRS Module cleared of crash data by a firm in southern California.

And I discovered from fixing one of my side crash sensors that when a crash sensor fault is fixed the dash light goes out without any resetting.

06-08-2020, 04:44 PM	#1 (permalink)
CrazyZed Base Member Join Date: Mar 2020 Location: Arizona Posts: 2 Drives: 2016 370Z Base Auto Rep Power: 5	SRS Airbag Front Crash Sensor Fault Hello fellow 370Z Enthusiasts! I own a 2016 Z that had been in an accident that damaged the wire that leads to the front crash sensor in the engine bay. The wire damage was right behind the passenger headlight. The blinking SRS Dash Light, when put into diagnostics mode, displays two 3 second flashes followed by one quick flash. (The indication of a Front Crash Sensor Fault) Judging from this I attempted to cut out the damaged SRS wire, (after having cut the outer plastic wiring tube and pulled it away from the other wires), and I took a new connector and sensor and butt-spliced them to the remaining wire. (This is a shielded SRS cable and has a ground wire) But I'm still getting the same Dash Light Sequence showing the front crash sensor fault. Are there any knowledgeable persons who might be willing to help with advice on how to remedy this problem? Can the wire be successfully spliced? Could the fault actually be somewhere else?

06-08-2020, 05:38 PM	#2 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	There may be a reset procedure in the FSM. Link in sig. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Passenger seat airbag sensor	Aviatrix	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	6	02-08-2019 03:28 PM
How to fix airbag after crash	zettobr	Exterior & Interior	7	01-24-2017 11:59 PM
FI and Map Sensor Fault	W.O.W. 370Z	Forced Induction	40	03-11-2016 07:34 PM
Passenger Airbag Sensor not turning OFF	Sergio98	Nissan 370Z General Discussions	29	02-04-2015 09:56 PM
[WTB] Sensor-side-airbag	Axelsc1	Parts for sale (Private Classifieds)	1	03-13-2012 05:51 PM

06-08-2020, 05:48 PM	#3 (permalink)
gryghst Base Member Join Date: Apr 2016 Location: Albany, NY / Largo FL Age: 73 Posts: 85 Drives: '16 Nismo Rep Power: 1923	You may need to have the air bag control module cleared. I had to replace the front crash sensor on a 350z. I then sent out the air bag control module to be cleared. I found a number of places on line that would do it wit a 2 day turnaround.

06-10-2020, 03:53 PM	#4 (permalink)
CrazyZed Base Member Join Date: Mar 2020 Location: Arizona Posts: 2 Drives: 2016 370Z Base Auto Rep Power: 5	Had the SRS Module cleared of crash data by a firm in southern California. And I discovered from fixing one of my side crash sensors that when a crash sensor fault is fixed the dash light goes out without any resetting.