Stock Brakes Question

vtec to vvel · 02-28-2015, 10:31 PM

I checked the brake pads this morning and they are all brand new (and yes, I checked both the outside and inside brake pads), so I know for a fact that it's not because of the pads are getting low. I tried using CRC Brakleen (which btw, this stuff is awesome!) to see if was maybe debris. Clean brakes, but still with the whistling noise. So I'm thinking perhaps the dealership didn't apply the lubricant on the shims?

kenchan · 03-01-2015, 09:16 PM

Quote:

Originally Posted by vtec to vvel

I checked the brake pads this morning and they are all brand new (and yes, I checked both the outside and inside brake pads), so I know for a fact that it's not because of the pads are getting low. I tried using CRC Brakleen (which btw, this stuff is awesome!) to see if was maybe debris. Clean brakes, but still with the whistling noise. So I'm thinking perhaps the dealership didn't apply the lubricant on the shims?

you mean like brakequiet?

hope you didnt go to town with brake cleaner while your wheels were still on the car

that stuff + brake dust can stain your wheels.
worst case your wheel weight tape is also weakened..

vtec to vvel · 03-02-2015, 08:48 PM

Quote:

Originally Posted by kenchan

you mean like brakequiet?

hope you didnt go to town with brake cleaner while your wheels were still on the car

that stuff + brake dust can stain your wheels.
worst case your wheel weight tape is also weakened..

no worries, i took the time to jack up each corner and took the wheels off prior to spraying away. i wanted to check the brake pads on both sides of the rotors to ensure they were good. honestly, that stuff dries up really fast. it evaporates as fast as i can spray.

Shotta · 03-05-2015, 10:48 AM

Quote:

Originally Posted by kenchan

you mean like brakequiet?

hope you didnt go to town with brake cleaner while your wheels were still on the car

that stuff + brake dust can stain your wheels.
worst case your wheel weight tape is also weakened..

Also some brake cleaners will eat through and degrade your caliper dust sealing rings so be careful with spraying that stuff everywhere.

vtec to vvel · 03-05-2015, 08:47 PM

Quote:

Originally Posted by Shotta

Also some brake cleaners will eat through and degrade your caliper dust sealing rings so be careful with spraying that stuff everywhere.

i was actually thinking about that too and decided to use the non-chlorinated CRC brake cleaner. and of course im paranoid about everything, so i literally had a can of compressed air and even though the brake cleaner dries fast, i still sprayed air to dry faster and then sprayed down with water.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stock Brakes Question	vtec to vvel	Brakes & Suspension	15	02-28-2015 10:48 PM
Bleed brakes question	ddvette9	Brakes & Suspension	4	10-19-2012 11:24 PM
G to Z brakes question	ZeeingAround	Brakes & Suspension	3	07-12-2011 09:40 AM
General question: Why are bigger brakes better?	axeman71	Brakes & Suspension	25	10-28-2010 06:07 PM
What makes the stock brakes stink?	kannibul	Brakes & Suspension	20	11-27-2009 03:56 PM

02-28-2015, 10:31 PM	#1 (permalink)
vtec to vvel A True Z Fanatic Join Date: Feb 2015 Location: In a house Posts: 3,988 Drives: Z Rep Power: 502910	I checked the brake pads this morning and they are all brand new (and yes, I checked both the outside and inside brake pads), so I know for a fact that it's not because of the pads are getting low. I tried using CRC Brakleen (which btw, this stuff is awesome!) to see if was maybe debris. Clean brakes, but still with the whistling noise. So I'm thinking perhaps the dealership didn't apply the lubricant on the shims?