Originally Posted by axeman71 They are sending it to an upholstery shop somewhere in town. I guess they feel they don't have the expertise in the service dept. I find
|
|
LinkBack | Thread Tools | Display Modes |
07-09-2012, 06:11 PM | #16 (permalink) |
A True Z Fanatic
Join Date: May 2009
Location: Halifax
Posts: 1,659
Drives: '13 CTS-V, '76 Vette
Rep Power: 27 |
I find this hard to believe that they are sending it outside the dealership. My SM was quite clear that Nissan would not send mine out. The new top was shipped in from Montreal and one of their techs did the replacement. I spoke with the tech afterwards and he said it was the first top he had ever replaced on a 370Z if not the first for a Z. Maybe Nissan does it different here in the great white north.
__________________
"America.... still builds rockets!" Vette: 355 cid, 400 rwhp '13 CTS-V Coupe: 6.2L LSA, 556HP |
07-12-2012, 10:59 AM | #17 (permalink) |
Base Member
Join Date: May 2010
Location: Augusta, GA
Posts: 129
Drives: '10 Conv A7 Blk Chry
Rep Power: 15 |
I got my car back this morning. Faster than I expected and everything looks perfect. I have to wait 7 days before putting the top down to give it time to stretch and settle on the frame. I won't know until then if the movement is right but given the look of the top I expect everything to be fine.
Now I just need to try and prevent the rubbing above the drivers side window from happening again.
__________________
2010 Roadster, 7AT, Black Cherry, Touring, Navigation, Lighted Kick Plates, Floor and Trunk Mats. |
07-13-2012, 01:32 PM | #18 (permalink) |
A True Z Fanatic
Join Date: May 2009
Location: Halifax
Posts: 1,659
Drives: '13 CTS-V, '76 Vette
Rep Power: 27 |
Glad to hear it went ok. The rubbing you speak of is in a TSB that requires one or both windows to be adjusted after the top is installed. Didn't your dealer make the adjustment?
__________________
"America.... still builds rockets!" Vette: 355 cid, 400 rwhp '13 CTS-V Coupe: 6.2L LSA, 556HP |
07-13-2012, 05:04 PM | #19 (permalink) |
Base Member
Join Date: May 2010
Location: Augusta, GA
Posts: 129
Drives: '10 Conv A7 Blk Chry
Rep Power: 15 |
Mine was a different issue. The top was rubbing on a bundle of wires when the top was raised or lowered. See post #82 on page 6 in the thread below for some pictures taken by Merlin when he had the same issue.
TOP Tearing issue
__________________
2010 Roadster, 7AT, Black Cherry, Touring, Navigation, Lighted Kick Plates, Floor and Trunk Mats. |
04-04-2013, 04:56 PM | #20 (permalink) |
Base Member
Join Date: Apr 2011
Location: erie pa
Posts: 6
Drives: 370 z
Rep Power: 14 |
My top was replaced under warranty last fall. It had a hole worn in the passenger side. My concern is that the same thing will occur. Took it in for oil change and they sent it out for possible adjustment of the frame that supports the cloth top. Hope it gets resolved as the warranty is out in July and to replace it again will be VERY EXPENSIVE!
|
12-07-2013, 10:01 PM | #21 (permalink) |
Base Member
Join Date: Feb 2013
Location: Greenville sc
Posts: 1
Drives: 2010 Nissan 370z Mt
Rep Power: 12 |
Major top problem
Hey my email is gorillat4@gmail.com I'm having some really bAd problems w my top on my z. Please email me to confirm you still exists before I type my whole problem on here. I think you could really help me out. Thanks
QUOTE=axeman71;1817802]I got my car back this morning. Faster than I expected and everything looks perfect. I have to wait 7 days before putting the top down to give it time to stretch and settle on the frame. I won't know until then if the movement is right but given the look of the top I expect everything to be fine. Now I just need to try and prevent the rubbing above the drivers side window from happening again.[/QUOTE] |
12-08-2013, 03:55 AM | #22 (permalink) |
Premium Member
Join Date: Mar 2012
Location: Indianapolis, IN
Posts: 303
Drives: 13 370Z RTS SR M6
Rep Power: 50 |
Why not just go ahead and post the details of your problem? I have a printed copy of the service manual I can thumb through, and some mechanical experience. While I can not say I'll actually be helpful, I'll certainly try.
__________________
Steve |
12-08-2013, 12:51 PM | #23 (permalink) |
Base Member
Join Date: Apr 2011
Location: erie pa
Posts: 6
Drives: 370 z
Rep Power: 14 |
370 z top wear rubbing issue rear passenger side
I had the entire top of my 2010 z replaced from inside out after months of trying to problem solve by dealer. It seems that it is the frame that is sharp and causes damage to the actual top. Mine was replaced under warranty. Good luck and be persistent!!
|
12-09-2013, 02:42 AM | #24 (permalink) |
Track Member
Join Date: Apr 2012
Location: earth
Posts: 770
Drives: car
Rep Power: 2067 |
I had mine replaced bc of wear and tear on the inside the size of a penny above both driver and passenger head. 1 year latter its doing it again and I've been waiting side the summer for the new one to get in :/
|
12-11-2013, 04:50 PM | #25 (permalink) |
Base Member
Join Date: Jun 2012
Location: Mount Dora, Florida
Posts: 16
Drives: 2010 Roadster
Rep Power: 13 |
I had mine replaced under the TSB for the window wear. They sent it to a specialty shop in town - did a good job but took 5 days (3 work days plus a weekend). They did give me a rental for the whole period. The TSB also called for a window adjustment to avoid the window wear and after 18 months so far no window wear on the top. I'm using RAGGTOPP on it now, hopefully will help it last longer. Also bought the Nissan Gold extended warranty (8 years, 100,000 miles, $100.00 deductible) which covers the convertible top. Another top replacement during that time will justify the warranty.
__________________
2010 370Z Roadster Touring 7AT Sport Pkg/Nav Pkg 2013 Pathfinder Platinum 4x4 1996 4Winns 190 5.0L |
12-14-2013, 05:55 PM | #26 (permalink) |
Enthusiast Member
Join Date: Nov 2013
Location: Wylie, TX
Posts: 446
Drives: 2013 roadster ST
Rep Power: 13 |
had them look at mine due to the auto drop on the passenger side window not dropping enough to clear the top. It actually looks like the weatherstripping at a crease seam is hanging down too low. It is actually hard to open the door.
We'll see... |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Canada TSBs for 370z | Bking | Canada | 5 | 02-13-2012 02:45 AM |
No TSBs for Canadian Z's? | Bking | 370Z Technical Service Bulletins (TSB) / Recalls | 1 | 01-12-2012 11:31 AM |
370Z Service Bulletin: Recalls and TSBs. | zmyride | Nissan 370Z General Discussions | 13 | 12-21-2011 02:25 PM |
thinking of buying 370z, then GTM turbo's , but overheat issues,oil issues ?? | Christopher | Nissan 370Z General Discussions | 19 | 10-16-2009 04:55 PM |
370Z TSBs | 37Z | Nissan 370Z General Discussions | 3 | 06-24-2009 12:05 AM |