Racing your Roadster?

crash1369

Sounds nice.

Isn't 220 a little high though, especially if it was only 50 out?

That reminds me, I might as well update this. I met with one of the Tech inspectors from EMRA who checked over my car, and said he can't let it on the track. But having actually LOOKED and not just assuming I am satisfied with his answer. He explained also explained why he had to say no, which of course was different then everyone else who had never even seen one, and actually made sense. His only really complaint was that the roll bar has no support in the middle, so if the car were to come down on a corner or something it could just fold up. I don't think that's very likely but I guess that just means I'll have to get my *** in gear and finish the real race car.

__________________

Fire

Having contacted two different track day companies for Watkins Glen they stated the track sets qualifications, thier qualification is a roll hoop must be taller than the helmet and if a broom stick is placed from windshield top to hoop no part touches the helmet also no deploying hoops unless locked in up position.

__________________
2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

sarmyth

Well that's interesting... so the real complaint was that the car had hoops instead of a roll bar? Or that there was no diagonal crossbar *within* each hoop?

Or was it that the hoops were not supported by a bar facing towards the front or rear of the car (ie only supported in a 2d space, left-right, instead of a 3d space, left-right and front-back)?

crash1369

Well all of it really. There is a strut tower brace that goes across the car right behind the seats, as you know. It's clearly visible in the hard tops, anyway in our cars they attached the roll bar right to that but it has no support in the center. Since their two separate hoops if the car were to land on the corner or something the bar could just bend in half, obviously not doing it's job then.
The height should be fine, dependning on how tall you are of course but that's not really the issue anyway.

__________________

sarmyth

And yes I thought 220 was pretty high given the conditions which means without an oil cooler..... =p

red6spd

Hope you get it on the track soon. Would love to see a roadster at full opposite lock kicking it around a turn.

__________________
2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness.
???Whp ???WTQ (Will find out come spring time)

kingcobra

Any updates on this? I was curious to track my Roadster as well...

__________________
'10 370Z Roadster Touring w/sports, navi

Bummer

Short version: Go to the track you want to run on and ask. The tech inspectors there will have final say and there appears to be no set answer.

__________________
Steve

sarmyth

Very true. I did not have a problem with any of the clubs I went with or tracks I was out on in California.

kingcobra

Good to hear, which tracks do you go to?

__________________
'10 370Z Roadster Touring w/sports, navi

sarmyth

*Did* I go to... sold the Z and switched to a DD2 Kart (So very fast!).

Thunder Hill, Buttonwillow, Laguna Seca, Infineon, Willow Springs.

Always wanted to go out to Fontana, but they don't allow convertibles without roll cages with their high banked turn.

RoadsterST

Tracking mine with SCCA.

Sent while driving!

crash1369

I'm glad to see somebody managed to get on the track, and congratulations on your trophy.

Once they let one on they will start letting them all. Maybe I'll come back for the 400Z then (or whatever is next)

__________________

tonybell_57

Does anyone know for sure that the roll hoops even come into play if the car goes upside down? I ask because my two previous cars were Honda S2000s. When it goes upside down, it rests on the hood and the windshield frame, which, it turns out, is an integrated roll bar. I know this for a fact, having flipped my first one.

It may be that with the weight distribution, the Z would land similarly, especially since it is even more front-weighted (53/47) than the S2000 (51/49).

__________________
APF|Berk|Escort|EVO-R|Hotchkiss|JPM Coachworks|Kinetix|SpoilerSolutions|Stillen|Tein|Z 1

OldRice

Might want to look into this for your region...
https://www.nasaproracing.com/

They allow 350ZR/370ZR factory hoops to qualify for tech. I will be doing HPDE-1 this summer in my region in a 2006 350ZR.

__________________
Nitrous Outlet 57N 33F +NANO = 349whp/353wtq