Lid Cover contacting Roof

sarmyth · 01-23-2011, 02:26 AM

Well that sounds scary. A day late but in time for the weekend, here's the info.

mcapuano1101 · 01-25-2011, 11:54 PM

I've had my car for three weeks & the top bangs the lid every time I open it. Took it to the dealer for adjustment...still having the same problem. Maybe it will stop when it warms up. We'll see. I tend to forget about it once the winds blowing in my hair. I love this car. Don't miss the old 350 at all. I'm just going to enjoy the car & keep an eye on the top. I negotiated an extended warranty during my purchase...so if things go south...Nissan will just have to replace it.

mcapuano1101 · 01-26-2011, 12:00 AM

Thanks sarmyth..that looks easy enough. I trust myself before some random tech!

cujo · 01-26-2011, 01:29 AM

Quote:

Originally Posted by sarmyth

Well that sounds scary. A day late but in time for the weekend, here's the info.

WOWWW! Sarmyth! You SIR are a genious!!!!! I just went out and dailed it....for thefirst time in my life... my lid cleared the roof without any baggings.
That is such an easy and life saving DIY! Thank you soooo muchhhh!!!

mcapuano1101 · 01-26-2011, 10:58 PM

Tried the top adjustment. I seem to have tightened the adjustment bolt as far as it will allow....& still contacting lid. Guess it's back to the dealer...dammit!

Zigen5 · 01-28-2011, 06:14 AM

Mine does that sometimes.... Unless my roof is broken, I refuse to take my car to the dealer... I don't want a small problem turn into a huge problem..

Roadster Fan · 01-30-2011, 09:27 AM

I have a similar issue. I took it in to the dealer, and they filed a report with the head engineering office <???>. It's been a couple weeks now and I took it back for another issue this week... they said they have not been able to resolve the issue. Curious...

I love my roadster.. for sure.. I am hoping that they resolve these top issues for me... us.

sarmyth · 02-21-2013, 10:24 PM

Well it's a couple years later and if any of you guys still have your roadsters I'm selling my unused smarttop module, and prepainted brilliant silver fiberglass wing. Never got a chance to install them before moving on.

Eventually got fed up with endless trips to the dealer to fix top wear issues. It was painful to watch my car slowly destroy itself day by day. Any of you guys still in your ZR?

Daveski38 · 02-22-2013, 12:48 PM

sarmyth,

We've still got ours, didn't have this issue with the top so I didn't post in this thread.

What kind of prices are you wanting?

sarmyth · 02-23-2013, 07:04 PM

Quote:

Originally Posted by Daveski38

sarmyth,

We've still got ours, didn't have this issue with the top so I didn't post in this thread.

What kind of prices are you wanting?

Roadster specific items, both brand new never installed:

Spoiler Solutions Roadster prepainted in K51 platinum graphite for 250 shipped.
Smart top module 250 shipped.

Remaining items from my part-out are here:
Fast Intentions CBE/CarboTech/SmartTop/Chassis Bracing/Hotchkis Swy & More -- Norcal

Daveski38 · 02-25-2013, 01:28 PM

Thanks Man,

Ran thru the classified before asking but guess I missed it

737driver · 02-25-2013, 10:57 PM

PM sent on spoiler

Bruce

Jazzster · 11-24-2014, 12:37 PM

Quote:

Originally Posted by sarmyth

Well that sounds scary. A day late but in time for the weekend, here's the info.

Not sure anyone is still around from this thread. Is this done on both sides or just the driver side?

sarmyth · 11-25-2014, 11:38 AM

From what i remember i think it was just on one side... But it's been many years

tommy_nick · 05-01-2015, 09:03 PM

So i tried it and still got the led touching ... the thing is i still see a more place to tighten the bolt but it refuses it get so tight that am afraid to break it ... i did relese the lock nut all the way down and it went fine but the adjustment bolt refuses to go all the way down any idea

01-28-2011, 06:14 AM	#21 (permalink)
Zigen5 Enthusiast Member Join Date: Jun 2009 Location: Wesley Chapel, FL Posts: 260 Drives: '10 BC 370z Roadster Rep Power: 16	Mine does that sometimes.... Unless my roof is broken, I refuse to take my car to the dealer... I don't want a small problem turn into a huge problem.. __________________ *Meet HaZy: 2010 Black Cherry 370z Roadster - S-Tune Body Kit - 5:AD Bronze 19" Rims - K&N Filters - Euro Fog Lamp - Full LED*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Red Nismo Engine Cover (original only, not painted) - $100 to you + silver cover	'10Anamoly	Wanted	0	11-05-2010 08:33 AM
Wet looking CF roof cover?	Ambient	Exterior & Interior	0	08-04-2010 05:29 AM
Sun Roof Install	mysxcz	Australia/New Zealand	2	10-06-2009 03:43 AM
CF Roof Interest	SpawnAeroJohn	Exterior & Interior	33	08-24-2009 12:20 PM
Wanted: cover for those @#$!*^!& holes in the cover between radiator and bumper	wstar	Wanted	3	04-08-2009 05:51 PM

01-25-2011, 11:54 PM	#17 (permalink)
mcapuano1101 Base Member Join Date: Jan 2011 Location: Dallas Posts: 13 Drives: 2010 370z Roadster Rep Power: 14	I've had my car for three weeks & the top bangs the lid every time I open it. Took it to the dealer for adjustment...still having the same problem. Maybe it will stop when it warms up. We'll see. I tend to forget about it once the winds blowing in my hair. I love this car. Don't miss the old 350 at all. I'm just going to enjoy the car & keep an eye on the top. I negotiated an extended warranty during my purchase...so if things go south...Nissan will just have to replace it.

01-26-2011, 12:00 AM	#18 (permalink)
mcapuano1101 Base Member Join Date: Jan 2011 Location: Dallas Posts: 13 Drives: 2010 370z Roadster Rep Power: 14	Thanks sarmyth..that looks easy enough. I trust myself before some random tech!

01-26-2011, 10:58 PM	#20 (permalink)
mcapuano1101 Base Member Join Date: Jan 2011 Location: Dallas Posts: 13 Drives: 2010 370z Roadster Rep Power: 14	Tried the top adjustment. I seem to have tightened the adjustment bolt as far as it will allow....& still contacting lid. Guess it's back to the dealer...dammit!

01-30-2011, 09:27 AM	#22 (permalink)
Roadster Fan Base Member Join Date: Jan 2011 Location: Texas Posts: 7 Drives: 14 370ZR blk manual Rep Power: 14	I have a similar issue. I took it in to the dealer, and they filed a report with the head engineering office <???>. It's been a couple weeks now and I took it back for another issue this week... they said they have not been able to resolve the issue. Curious... I love my roadster.. for sure.. I am hoping that they resolve these top issues for me... us.

02-21-2013, 10:24 PM	#23 (permalink)
sarmyth Base Member Join Date: Apr 2010 Location: CA Posts: 96 Drives: 370z Roadster Rep Power: 15	Well it's a couple years later and if any of you guys still have your roadsters I'm selling my unused smarttop module, and prepainted brilliant silver fiberglass wing. Never got a chance to install them before moving on. Eventually got fed up with endless trips to the dealer to fix top wear issues. It was painful to watch my car slowly destroy itself day by day. Any of you guys still in your ZR?

02-22-2013, 12:48 PM	#24 (permalink)
Daveski38 Base Member Join Date: Jul 2010 Location: South of Houston Posts: 114 Drives: 10 BC A/T T Roadster Rep Power: 15	sarmyth, We've still got ours, didn't have this issue with the top so I didn't post in this thread. What kind of prices are you wanting?

02-25-2013, 01:28 PM	#26 (permalink)
Daveski38 Base Member Join Date: Jul 2010 Location: South of Houston Posts: 114 Drives: 10 BC A/T T Roadster Rep Power: 15	Thanks Man, Ran thru the classified before asking but guess I missed it

02-25-2013, 10:57 PM	#27 (permalink)
737driver Base Member Join Date: Feb 2013 Location: Las Cruces, NM Posts: 2 Drives: 10 Nissan 370z auto Rep Power: 12	PM sent on spoiler Bruce

11-25-2014, 11:38 AM	#29 (permalink)
sarmyth Base Member Join Date: Apr 2010 Location: CA Posts: 96 Drives: 370z Roadster Rep Power: 15	From what i remember i think it was just on one side... But it's been many years

05-01-2015, 09:03 PM	#30 (permalink)
tommy_nick Base Member Join Date: Aug 2014 Location: united arab emeirets Posts: 53 Drives: 10 nissan 370z m6 Rep Power: 11	So i tried it and still got the led touching ... the thing is i still see a more place to tighten the bolt but it refuses it get so tight that am afraid to break it ... i did relese the lock nut all the way down and it went fine but the adjustment bolt refuses to go all the way down any idea