Hydraulic problem
 

Hello
, I bought a 2010 370z, roadster.
the hood mechanism was broken. I found a used one, which I change, and I keep my hydraulic pump. But when reassembling, there is an oil leak at the level of the aluminum plate which contains the 3 screws.
Is there a room to change at this level? seals?
once reassembled, there are always 2 holes where there is no hose, is this normal?
Who could help me?
BERTRAND

Could be of some use.


http://www.the370z.com/nissan-370z-r...iy-repair.html

thank you cooltoy

You should contact Klaus Witte at Top Hydraulics in Oregon. He talked me through my hydraulics problems. I had the typical problem with the chafed wire that finally broke. I accidentally sliced through one of the hydraulic lines with a razor knife while cutting off the tape around the wires and lines so I ended up having to buy a replacement line from Klaus. He helped me find the broken wire and fixed me up with the correct parts. There are some videos online that he put out about the 370Z system. You can look at all the parts and how they should look on his videos.

Klaus Witte

Top Hydraulics, Inc.
3235 Pacific View Dr.
Florence, OR 97439
(541) 902 3214

www.tophydraulics.com