12-20-2022, 01:54 PM
|
#1 (permalink)
|
|
Enthusiast Member
Join Date: May 2013
Location: Sacratomato
Posts: 309
Drives: your mama wild.
Rep Power: 14
|
Quote:
Originally Posted by group256
Could you take a picture of the access holes and post them here? I spent hours too to get those bolts started  |
I tried to upload a photo but can’t figure out how. The access holes are in the aluminum frame right above the bolt locations. They’re right in the center of the frame below the rear window. It’s been a while now but I recall you have to put the top about half way down to get some slack in the fabric then you can carefully pry the fabric up enough to get a socket through the hole. I think I put a small wad of blue masking tape inside the socket to hold the bolt in place then slipped the socket, bolt and a short extension into the hole. From there it was fairly easy to get the bolts started. A picture would be worth 1000 words but I can’t figure out how to do it. Duh!
Oh, it came through. Okay. Enjoy.
__________________
About my name: I occasionally play a Conn 10M Tenor Saxophone - so 10MPlayer
|
|
|
Similar Threads
11Likes
Hybrid Mode
