My new Nismo Front Bumper Design!

PapoZalsa · 05-30-2010, 10:35 PM

Quote:

Originally Posted by shabarivas

fix the lip and i think the vents will work a lot better - and you are obviously going to have to make your sides much more aggressive to pull that off - the rear is probably fine

And smaller air ducts...

sensi09 · 05-31-2010, 12:03 AM

It's too busy....

bullitt5897 · 06-02-2010, 09:10 AM

Quote:

Originally Posted by sensi09

It's too busy....

What are you smoking!

By the way for those asking for smaller ducts on the front the smaller ducts do not flow and look out of place on the nismo bumper. I can not do anything about the lip either since it is OEM. This rendering was simply an idea to apply to a stock nismo front bumper. Does it have a little Lambo flavor? Maybe... but that was not a design that I had taken in mind.

For those of you who do not design and/or understand my designs. Here is a little insight in why my designs look the way they do. I take the existing designs of a product aka: nismo 370z and I follow those natural designs and lines of the car to help come up with alternative designs. Some will like these designs others will not. If you dont like my design... I ENCOURAGE YOU TO DO ONE BETTER THAN MINE AND POST IT UP.

Too many people on this forum have gotten to the point where they criticize on the grounds of their opinions with out being constructive. I would like you people to try and do what us photo choppers do and create a design. I am by no means an artist nor will I ever call myself one. I do however have a talent to photoshop with the best of them. so please use this forum to post up your own nismo bumper designs and maybe someone who has the guts will try your design

stormcrow · 06-02-2010, 12:01 PM

Challenge accepted!

I don't know how to do all of that cool shading and gradient stuff, but here is my depiction of a better design. Note the smaller vents, but longer cuts and an opening that narrows somewhat as it goes towards the outer edge. Very functional and super sexy at the same time!

waaaasabi · 06-02-2010, 12:24 PM

Quote:

Originally Posted by stormcrow

Challenge accepted!

I don't know how to do all of that cool shading and gradient stuff, but here is my depiction of a better design. Note the smaller vents, but longer cuts and an opening that narrows somewhat as it goes towards the outer edge. Very functional and super sexy at the same time!

Bored at work, so I did this using Powerpoint (the true sign of a corporate/office world sellout):

Not sure if that was the look you were going for so I only did one side.

I also did this for funsies:

stormcrow · 06-02-2010, 12:27 PM

Quote:

Originally Posted by waaaasabi

Bored at work, so I did this using Powerpoint (the true sign of a corporate/office world sellout):

Not sure if that was the look you were going for so I only did one side.

I also did this for funsies:

Powerpoint?! For shame, sir! MS Paint FTW!

I see now that my penises do look like the 'evil doer' mustache. But, alas, they were merely meant to be penises.

waaaasabi · 06-02-2010, 12:37 PM

Quote:

Originally Posted by stormcrow

Powerpoint?! For shame, sir! MS Paint FTW!

I see now that my penises do look like the 'evil doer' mustache. But, alas, they were merely meant to be penises.

This is somewhat personal, and I've never told anybody, but I was involved in a vicious MS Paint accident once, back in my more youthful days. So traumatic that I was scarred for life, so now I can no longer use it

As for penises and mustaches, you know what they say about a guy with a large mustache...

stormcrow · 06-02-2010, 12:44 PM

Quote:

Originally Posted by waaaasabi

This is somewhat personal, and I've never told anybody, but I was involved in a vicious MS Paint accident once, back in my more youthful days. So traumatic that I was scarred for life, so now I can no longer use it

As for penises and mustaches, you know what they say about a guy with a large mustache...

Does this scare you?!

Sorry. I could not resist. I will share the Xanax if I have given you a panic attack.

Viera · 06-02-2010, 02:06 PM

Quote:

Originally Posted by stormcrow

Challenge accepted!

I don't know how to do all of that cool shading and gradient stuff, but here is my depiction of a better design. Note the smaller vents, but longer cuts and an opening that narrows somewhat as it goes towards the outer edge. Very functional and super sexy at the same time!

I'm just gonna go out on a limb here and say that that looks like an outline of a penis.

stormcrow · 06-02-2010, 02:25 PM

Quote:

Originally Posted by Viera

I'm just gonna go out on a limb here and say that that looks like an outline of a penis.

Winner!

bullitt5897 · 06-02-2010, 03:00 PM

you see Stormcrow threw his junk up on the screen and traced it in MS Paint!!!! The man is very talented and yet very small...

I kid I kid Jeremy

bullitt5897 · 06-02-2010, 03:03 PM

I dont know if you realized b you just copied the Tamon Design vent design somewhat... Theirs is a staged vent on the inner side of the inlet while yours is on the outer side of the inlet.

stormcrow · 06-02-2010, 03:07 PM

Quote:

Originally Posted by bullitt5897

you see Stormcrow threw his junk up on the screen and traced it in MS Paint!!!! The man is very talented and yet very small...

That's why I bought the 370Z. It extends my penis by at least 2".

bullitt5897 · 06-02-2010, 03:33 PM

there ya go everyone a true success story! the 370z will make your peener longer!!!

Zaku · 06-02-2010, 04:36 PM

Moustache Z is win

06-02-2010, 03:00 PM	#41 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	you see Stormcrow threw his junk up on the screen and traced it in MS Paint!!!! The man is very talented and yet very small... I kid I kid Jeremy __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-02-2010, 03:03 PM	#42 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	I dont know if you realized b you just copied the Tamon Design vent design somewhat... Theirs is a staged vent on the inner side of the inlet while yours is on the outer side of the inlet. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-02-2010, 03:33 PM	#44 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	there ya go everyone a true success story! the 370z will make your peener longer!!! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-02-2010, 04:36 PM	#45 (permalink)
Zaku Base Member Join Date: Jun 2009 Location: Maryland Posts: 76 Drives: 02 Honda Civic Si Rep Power: 16	Moustache Z is win __________________ _______________________ Current Z funds $ 3600 =)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo front bumper	tommyguns	Exterior & Interior	8	10-18-2011 12:48 PM
Hilarious eBay listing for used 370Z conv. with Nismo front bumper!	marcussoori	Nissan 370Z General Discussions	10	03-08-2010 10:18 AM
Front Bumper / Front Vents / Aerodynamical goodies	SpawnAeroJohn	Exterior & Interior	94	01-24-2010 07:27 AM
feeler - authentic 09' nismo front bumper	u n i k	Parts for sale (Private Classifieds)	8	12-19-2009 07:19 PM
New Front Bumper Design!	bullitt5897	Exterior & Interior	33	11-21-2009 09:48 PM

05-31-2010, 12:03 AM	#32 (permalink)
sensi09 Enthusiast Member Join Date: Dec 2008 Location: so cal Posts: 449 Drives: _ Rep Power: 16	It's too busy....

06-02-2010, 12:01 PM	#34 (permalink)
stormcrow Enthusiast Member Join Date: Jan 2010 Location: Alpharetta, GA Posts: 267 Drives: 2010 370Z Nismo TT Rep Power: 15	Challenge accepted! I don't know how to do all of that cool shading and gradient stuff, but here is my depiction of a better design. Note the smaller vents, but longer cuts and an opening that narrows somewhat as it goes towards the outer edge. Very functional and super sexy at the same time!