Test fit - Work Varianza T1S
 

I wanted to see how aggressive the 370z can go with some wheels. So I took the wheels from my 350z, called my friend with a 370z and this is what I got...

http://i29.photobucket.com/albums/c2...zWorkT1S-1.jpg
http://i29.photobucket.com/albums/c2...zWorkT1S-2.jpg
http://i29.photobucket.com/albums/c2...zWorkT1S-3.jpg

These wheels came off my Z

http://i29.photobucket.com/albums/c2...e/100_1491.jpg
http://i29.photobucket.com/albums/c2...e/100_1492.jpg
http://i305.photobucket.com/albums/n...ue/tonyzzz.jpg

Wheels Specs

Work Varianza T1S
20x9.5 -3 235/30/20
20x10.5 +0 275/30/20

that is going to be a tight fight, I'm sure as it is it must rub a lot

thats a sweet 350 tho!:tup:

Im running 20 x 9.5 +15 (265) and I rub the top of the fender liner in the front, 20 x 11 +0 (305) and zero rubbing issues!!! Except on REALLY steep declines to a level street and I am practically entering the street sideways cause I cant make it otherwise. Then its a slight rub but nothing noticeable and it doesnt even leave a mark on the tire or fender.

Love the T1s!!! :tup: for a clean set of wheels! What pad height are you running? I am running Highpad for BBK clearance... if I wasnt going to run huge brakes I could go much more aggressive. :tup: now sell the 350 and get a 370z!!!

My bad puppies:
http://i234.photobucket.com/albums/e...epoints139.jpg
http://i234.photobucket.com/albums/e...epoints033.jpg
http://i234.photobucket.com/albums/e...epoints053.jpg

what's the WIDEST wheel we can fit on the rear??

in offset or in size? or a combo of the both? How much camber do you want to run? What series tires you want to run too?

I need some serious meat on the rear tires so I wont be going to much more aggressive in offset.

in terms of widest wheel we can fit a 13" maybe more??? A 13" will be pushing it though...

wow 13" wide would be awesome, bullitt you know more on this than me what else would it take other than wheels ex camber control arms and such

13 wide sure... wouldnt it be better to go 12 wide or even 11.5 with more aggressive offset... more lip FTW!

Those wheels are teh sh*t on that Z loving it for sure!

That red 350 is HOT!

I'm glad you came into my thread. I was actually looking at your setup and that's what made me want to try these wheels on the 370. How much camber are you running front and rear with those sized tires? And are the fronts 265/30 or 35? Rears 305/30 or 35? I know for sure The front tires can go wider. Did you have to roll/pull the rear fenders to fit the wider tires? As for the disk I am running r-disk in front (bbk clearance) and o-disk in the rear (5" lip)

And thanks for the comments on my 350. I've done so much to it that it's gonna be hard to let go but we'll see..

Btw, your Z is sweet bullitt

I for one would not run a 13" wide rim... but he asked what was the largest we could run :driving: 11.5 or 12 would be the widest I would recommend but you better be running 305+ on tire widths!!!

Thanks MrToeKnee! :happydance: boostin my ego even more lol :tup: I dont know my current camber settings but to be honest I think the fronts are close to -2.5 and the rears close to -3. But that is just from me eye'ng it. I have some sways to install and then an alignment to get done. I will fill yall in when thats done :tup:

Love the 350z but I think the 370z suites you better hehehe:stirthepot: