This maybe a problem no-one can solve literally !!!
 

I have tried everything the manual has told me to program home link to my garage. The garage motor has a learn button I've done many ways does anyone out there know how to get this darn thing to work I'm tired of getting out of the car !!!!!!! Lmao I got a fully loaded Z for a reason so I don't have to buy stupid garage door openers and etc...

I thought I read something about a switch in the fuse box that the dealer is supposed to flip on for delivery to the customer but sometimes they forget. Not sure if our '09s have it but though.


Still haven't gotten mine to work either.

So far no one I've ever talked to or tired to program has not had any success. It would be nice if someone could figure it out

I'll search for you. There was a post about homelink issues approximately 6 posts down.

http://www.the370z.com/exterior-inte...ge-switch.html

i got it paired up with my gate opener. just follwoed instructions.

If you can please find anything to help me out that would be great it's been forever and it's still not paired

Really? It's easy! Do you have a garage door opener remote? You just hold a memory button down on the mirror until it flashes, and then press open the garage with the remote. The mirror should recognize the signal just like that. Try different timing of the presses if you're having trouble. :tup:

I second that motion. Works pretty much the same on all Nissan autos.

If you have an older garage door opener, it may not be compatible with the car. I had to buy a new remote module for my opener (at least 25 yo) before it would work with the Z. Something about the security signals that mine didn't have.

I followed the instructions which called for pressing the purple learn button on the opener itself! May not make a difference but I have to hold the mirror button in until the door starts to open!

Youtube was more helpful for me when programing mine. Give it a look. And also, don't forget to erase the homelike memory just in case something else is stored. Good luck

THAT..... :iagree:

I had the same trouble with one of my 3 garage doors, needed to erase the codes in the opener. Press and hold the purple button on the opener until the LED goes off, than just press the button, and within 30 seconds press and hold the button on your mirror to program. Should work now. :driving:

I don't have a garage remote opener that's why I wanna program my home link. I click the learn button on the garage door motor but never seems to find the signal. Starting to give up

Call the garage door opener company. Some of the newer ones have codes outside the normal range of HomeLink.

I live in a town home community where two phases were built six months apart. For some reason, Phase II has a different garage door opener that no one has been able to open via HomeLink.

Mine hooked up fine. We were even able to get a neighbor's car to open my garage door, so it's not a HomeLink problem.

Thanks ill give it a try maybe that's the problem