Installed Berk HFC's, car is going crazy... help!
 

well, today I installed my Berk HFC's, now im having all sorts of problems, I hope one of you can shed some light. Before install, I unplugged the negative battery terminal to reset the ECU, it was unplugged for approximately 4 hours. Well I reconnected the battery and the car cranked up like a champ, sounds great btw. But I went to get out of the car and I noticed my window when I got out wouldnt seal. I also now cannot roll the window down when the door is open. Also, while the car is off, when I tap the push ignition, when all the lights go out, the SES flashes, then stays on. I hope I didnt just open a can of worms, has anyone else experienced this? Also, my windows wont roll down with the key fob anymore...

window reset, im a douche, close thread por favor.

:roflpuke2:

You're not a douche...wtf is a "window reset"?

:bowrofl: That cracked me up! Sorry...but it did. :p

bump! :D

When you unplug your battery you will have to reset your windows so they function properly.
Basic reset is down for 10 up for 10 and down for 10, must be done for each window. This will make sure the up/down function when you open close the doors works properly and other things. :)

well at least you were honest. :bowrofl:

haha, yeah, bonehead mistake, didnt do a good search. I've never heard of the window reset thing before, I about had a shyt attack. BTW, the cats fukkin wail between 3.5-5.5k rpms, gave me wood.

That's the 'hot zone' for our motors. Quiet exhaust sound decent there...loud exhausts SCREAM there.

when I did mine I didn't bother to do the ecu reset and avoided this issue and your right it sounded a little more throaty and it opened up alot quicker from idle to w.o.t.