Getting in/out of 370z

cooltoy · 11-07-2014, 04:25 PM

Stitch dye? Anyone brave enough to try?

Thread Dyed my Interior

Bking · 11-07-2014, 04:31 PM

Quote:

Originally Posted by Zcoupe

... getting out of the car i usually stick left leg out and use my left elbow on the seat bolster as leverage and push myself out

.

Exactly what you said.

98intrigue · 11-07-2014, 04:31 PM

I've always avoided putting pressure on the bolsters when getting in/out of my cars. Probably why my seats in my 113k mile G35 I traded in for the Z looked pretty good and the seats looked brand new when I traded in my 21k mile Z.

I put my right leg in, grab the steering wheel, and "fall" into the car while pulling myself with the wheel to guide me away from the bolsters. Getting out, I do the opposite... Left leg out, grab onto the steering wheel, and pull myself up with trying to avoid the bolsters at all costs.

JARblue · 11-07-2014, 04:42 PM

I use the steering wheel. TBH it was nice having a working ESCL that would keep the steering wheel locked in place when I used it as support for getting in and out

But I just make sure to put my hand in a place on it that won't make it turn when I apply pressure.

Also, I'm a bigger guy at 6'1" 225+ lbs (closer to 240 right now), and it's virtually impossible for me not to rub the bolsters at least a little. It's also difficult for me to avoid smacking my size 12 boots on the lower panel and/or door panel when exiting the vehicle. I just treat those panels with Super VRT every so often and they still look practically new. My wife put a hole in the rubber seal with a stiletto heel back when she was driving it.

Zcoupe · 11-07-2014, 05:17 PM

Quote:

Originally Posted by JARblue

My wife put a hole in the rubber seal with a stiletto heel back when she was driving it.

i would have been pissed, just like when ex gf getting out of the passanger seat jammed her heel into the aluminum lighted up sill plates and left a nice nickle size dent.

ohohoh123456 · 11-07-2014, 05:22 PM

You need a strong left leg...

JARblue · 11-07-2014, 05:24 PM

Quote:

Originally Posted by Zcoupe

i would have been pissed, just like when ex gf getting out of the passanger seat jammed her heel into the aluminum lighted up sill plates and left a nice nickle size dent.

It was her DD at the time, so I couldn't say a thing. It's bugged me for the last two years since the car became my DD. Unfortunately, its stupid expensive for what it is (like $300+). There are a large number of other things I will be spending that money on before I get around to replacing it.

I dropped my backpack on my illuminated kickplate and dented it a few months ago. Still pissed about that one, but I'm hoping a PDR guy can get rid of it for me if I uninstall it and bring it to him.

RonRizz · 11-07-2014, 05:43 PM

I crawl in through the hatch, and exit the same to reduce bolster wear. also helps from dinging doors on curbs, and others junk cars.

Jimbo370 · 11-07-2014, 05:45 PM

My short 93 yr old grandma had trouble getting out of the old 1990 300zx. My friends kids were complaining about how hard it was getting out of my Z last week. I just kind of roll out. When I get in I hit my head. Not a big fan of the entrance.

Jordo! · 11-07-2014, 06:04 PM

Grappling hook gun

ajm216 · 11-07-2014, 06:35 PM

I've had been using the left elbow push myself out method.

I recently discovered a new method I grab the door at the red arrow (see photo) and pull while standing up.

I'm 48 years old and in decent shape I had no problems getting out of my G35c 6MT but the 370 can be a little challenging.

srbrubak · 11-07-2014, 07:33 PM

Gee, I am 67, 5' 8" tall and have no problem getting in and out of my "Z."

1st · 11-07-2014, 07:58 PM

I climb out the driver side window then again I also slide over the hood.

Z-Girl 12 · 11-07-2014, 08:20 PM

Getting in and out if my Z sitting on coils and in high heels gracefully in front of cute dudes is never good for me. Sometimes I try to wait them out but alot of times they wait around to see who gets out. So funny, my lesson don't wear heels!

N8GTOL · 11-07-2014, 08:35 PM

At 6'4" I put my left hand on the door sill then my right forearm on the center console and lift myself up out of the seat and then rotate my body to get both my feet out the door at the same time. Then I move my right hand to the steering wheel for any additional leverage should I be in a tight spot where the door can't open wide. I found this method puts the least amount of rub on the bolsters and least amount of foot banging into the door and kick panels.

11-07-2014, 04:25 PM	#16 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Stitch dye? Anyone brave enough to try? Thread Dyed my Interior __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang. Last edited by cooltoy; 11-07-2014 at 04:27 PM.

11-07-2014, 04:31 PM	#18 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 39 Posts: 4,855 Drives: 2014 Viper Rep Power: 430	I've always avoided putting pressure on the bolsters when getting in/out of my cars. Probably why my seats in my 113k mile G35 I traded in for the Z looked pretty good and the seats looked brand new when I traded in my 21k mile Z. I put my right leg in, grab the steering wheel, and "fall" into the car while pulling myself with the wheel to guide me away from the bolsters. Getting out, I do the opposite... Left leg out, grab onto the steering wheel, and pull myself up with trying to avoid the bolsters at all costs. dant1127 likes this. __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

11-07-2014, 04:42 PM	#19 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I use the steering wheel. TBH it was nice having a working ESCL that would keep the steering wheel locked in place when I used it as support for getting in and out But I just make sure to put my hand in a place on it that won't make it turn when I apply pressure. Also, I'm a bigger guy at 6'1" 225+ lbs (closer to 240 right now), and it's virtually impossible for me not to rub the bolsters at least a little. It's also difficult for me to avoid smacking my size 12 boots on the lower panel and/or door panel when exiting the vehicle. I just treat those panels with Super VRT every so often and they still look practically new. My wife put a hole in the rubber seal with a stiletto heel back when she was driving it. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

11-07-2014, 05:22 PM	#21 (permalink)
ohohoh123456 Enthusiast Member Join Date: Jun 2013 Location: (‧‧)nnn Posts: 329 Drives: a Baby Rep Power: 12	You need a strong left leg... __________________ 13 NISMO\|Magma Red\|F.I. TDX 12''+NRHFC\|

11-07-2014, 05:43 PM	#23 (permalink)
RonRizz A True Z Fanatic Join Date: Aug 2011 Location: Pine grove, Pa Posts: 2,136 Drives: 2 feet, 3 pedals Rep Power: 6775	I crawl in through the hatch, and exit the same to reduce bolster wear. also helps from dinging doors on curbs, and others junk cars. __________________ P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

11-07-2014, 05:45 PM	#24 (permalink)
Jimbo370 Enthusiast Member Join Date: Jan 2014 Location: Florida Posts: 466 Drives: 09 black 370z MT Rep Power: 11	My short 93 yr old grandma had trouble getting out of the old 1990 300zx. My friends kids were complaining about how hard it was getting out of my Z last week. I just kind of roll out. When I get in I hit my head. Not a big fan of the entrance.

11-07-2014, 06:04 PM	#25 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Grappling hook gun __________________ Enjoy it. Destroy it.

11-07-2014, 07:33 PM	#27 (permalink)
srbrubak Base Member Join Date: Nov 2010 Location: Cedar Rapids, Iowa Posts: 144 Drives: 2010 370Z Blue 6MT Rep Power: 14	Gee, I am 67, 5' 8" tall and have no problem getting in and out of my "Z." cooltoy likes this.

11-07-2014, 07:58 PM	#28 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,708 Drives: Platinum Z Rep Power: 1616	I climb out the driver side window then again I also slide over the hood.

11-07-2014, 08:20 PM	#29 (permalink)
Z-Girl 12 A True Z Fanatic Join Date: Apr 2012 Location: Florida Posts: 4,105 Drives: Spirited Rep Power: 11716	Getting in and out if my Z sitting on coils and in high heels gracefully in front of cute dudes is never good for me. Sometimes I try to wait them out but alot of times they wait around to see who gets out. So funny, my lesson don't wear heels! Pintsize725 likes this. __________________ 2012 Z-SOLD 2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq

11-07-2014, 08:35 PM	#30 (permalink)
N8GTOL Base Member Join Date: May 2010 Location: San Diego Posts: 228 Drives: and flies Rep Power: 22	At 6'4" I put my left hand on the door sill then my right forearm on the center console and lift myself up out of the seat and then rotate my body to get both my feet out the door at the same time. Then I move my right hand to the steering wheel for any additional leverage should I be in a tight spot where the door can't open wide. I found this method puts the least amount of rub on the bolsters and least amount of foot banging into the door and kick panels. Zookeeper likes this.