Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   Stay away from this company... (http://www.the370z.com/nissan-370z-general-discussions/98000-stay-away-company.html)

DavidZ370 11-07-2014 02:37 PM

AAM does good work, sucks to hear that you're experience wasn't what you or any paying customer would expect, I am positively sure they'll make it right, and if not shame on them.

DavidZ370 11-07-2014 02:39 PM

Quote:

Originally Posted by FPenvy (Post 3025270)
so wait......you got a bad part......and got a refund minus shipping which is pretty much standard in most industries and you're calling them a bad company?

i mean your 5 paragraph pointless right up was hard to wade through but thats what i got from it.

"At no time did he refuse to give a full refund"

they even said they have a new guy who could have had an error and asked you to just go and test fit again. but you're bitching about that too?

it sounds like they are ignoring you because you sound like a whiny customer who got a refund but still crying about it. go take your money and blow it stillen's overcharging parts.

Cmon Presto you'r telling me that muffler deletes should cost 500 bucks?
I also would expect a full refund for them fking up

JARblue 11-07-2014 02:39 PM

Quote:

Originally Posted by FPenvy (Post 3025270)
blow it on stillen's overcharging parts.

Overcharging? How so?

Oh wait... they charge $800 to powdercoat some piping and the SC housing black :wtf2:

FPenvy 11-07-2014 02:40 PM

Quote:

Originally Posted by DavidZ370 (Post 3025278)
Cmon Presto you'r telling me that muffler deletes should cost 500 bucks?
I also would expect a full refund for them fking up

go price out T-304 stainless, tips, plus labor. it's most likely over 500 for most people.


trust me.

nismo9132 11-07-2014 02:45 PM

Quote:

Originally Posted by FPenvy (Post 3025270)
so wait......you got a bad part......and got a refund minus shipping which is pretty much standard in most industries and you're calling them a bad company?

i mean your 5 paragraph pointless right up was hard to wade through but thats what i got from it.

"At no time did he refuse to give a full refund"

they even said they have a new guy who could have had an error and asked you to just go and test fit again. but you're bitching about that too?

it sounds like they are ignoring you because you sound like a whiny customer who got a refund but still crying about it. go take your money and blow it stillen's overcharging parts.

I received 2 incorrect parts. I received a refund for the $479.00 short tail price, not including the shipping costs I paid. If I placed an order with any reputable company (ie. Amazon, Best Buy, Stillen, etc.) and they shipped the wrong part or one that was of subpar quality, they do refund the shipping charges that you pay. It is standard to refund shipping costs when your company screws up.

Regardless of the new guy potentially making the mistake, the point is that they shipped me three short tails. One had a weld that should not be there, the other had incorrect bends. If I'm buying an engineered product that is designed for my car, I should not have to test fit it. It should fit perfectly when I go to install it. These parts are supposed to be built to a specific spec, as your Fast Intentions exhaust is. If you can't build a product to a spec, then you are not engineering parts. (Interesting that you chose FI over AAM yourself).

Stillen is pretty much the only company that makes a Catback exhaust for the 4th generation Altimas (FYI) and when compared to AAM's $500 Axleback kit, $1200-1300 for a full Catback is a fair price, especially when the part actually fits as it should.

I apologize if this post offends you because you have personal ties to AAM, but my expectations are completely reasonable.

nismo9132 11-07-2014 02:47 PM

Quote:

Originally Posted by FPenvy (Post 3025280)
go price out T-304 stainless, tips, plus labor. it's most likely over 500 for most people.


trust me.

Most people don't buy in bulk or have contracts in order to receive reduced rates on bulk orders either though, which a company that produces exhausts would have...

FPenvy 11-07-2014 03:01 PM

Quote:

Originally Posted by nismo9132 (Post 3025297)
Most people don't buy in bulk or have contracts in order to receive reduced rates on bulk orders either though, which a company that produces exhausts would have...

yea and i ordered my metal through an exhaust shop. still isnt that cheap.

DavidZ370 11-07-2014 03:15 PM

Quote:

Originally Posted by FPenvy (Post 3025280)
go price out T-304 stainless, tips, plus labor. it's most likely over 500 for most people.


trust me.

I got a T304 Catback from top speed for 400 bucks. its been a year if not more, no rust perfect fitment :confused:

DavidZ370 11-07-2014 03:16 PM

Quote:

Originally Posted by JARblue (Post 3025279)
Overcharging? How so?

Oh wait... they charge $800 to powdercoat some piping and the SC housing black :wtf2:

Post of the year goes too :happydance:

FPenvy 11-07-2014 03:18 PM

Quote:

Originally Posted by DavidZ370 (Post 3025342)
I got a T304 Catback from top speed for 400 bucks. its been a year if not more, no rust perfect fitment :confused:

top speed? is that an ebay brand?

:wtf2:

kenchan 11-07-2014 03:27 PM

was expecting to open this tread to see..


Stay away from this company... 'NISSAN' lol

DavidZ370 11-07-2014 03:29 PM

Quote:

Originally Posted by FPenvy (Post 3025345)
top speed? is that an ebay brand?

:wtf2:

Top Speed Auto Accessories, Inc. No its the muffler deletes that aren't out of the arse overpriced website/ wait which pipes did we send you website :rolleyes:

kenchan 11-07-2014 03:30 PM

maybe they can start adopting the metric system instead of trying to make people that dont know how to do math to do fractions.

1/8" + 3/16" = 4/24" aka 1/6" :tup:

:ugh:

DOOMMONKEY777 11-07-2014 03:43 PM

Ohhh snap GTM all over again.

JARblue 11-07-2014 03:50 PM

Quote:

Originally Posted by kenchan (Post 3025357)
was expecting to open this tread to see..


Stay away from this company... 'NISSAN' lol

I'd ALMOST rather go to GTM than the Nissan dealers around here :wtf2:


All times are GMT -5. The time now is 05:22 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2