So, my track tyres are 265/35R18 on 9.5" wide wheels all round (square setup), +22 in front and +12 on rear. I could go +12 on front and +0 on
|
|
LinkBack | Thread Tools | Display Modes |
10-30-2014, 04:45 PM | #16 (permalink) |
A True Z Fanatic
Join Date: Dec 2009
Location: 03350 Australia
Posts: 1,514
Drives: 09 Nissan 370Z M6
Rep Power: 39973 |
So, my track tyres are 265/35R18 on 9.5" wide wheels all round (square setup), +22 in front and +12 on rear. I could go +12 on front and +0 on rear but would need to roll inner fender lips.
My DD wheels are 8.5 front an 9.5 rear and I now run 245/45R18 fronts and 275/40R18 rears to get the gearing with the 4.08:1 diff gears I now run as close to OEM as I can. Before the diff gears were changed, I ran 245/40R18 front and 275/35R18 rear as DD tyres. What you cannot do is use tyres with OD more than 4-5mm diameter difference as that will confused the stability control. |
10-30-2014, 05:34 PM | #19 (permalink) |
A True Z Fanatic
Join Date: May 2009
Location: Halifax
Posts: 1,659
Drives: '13 CTS-V, '76 Vette
Rep Power: 27 |
Nope. It will only lower the ride height by 1/2".
__________________
"America.... still builds rockets!" Vette: 355 cid, 400 rwhp '13 CTS-V Coupe: 6.2L LSA, 556HP |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Am I the only one getting screws in my sidewall? | Zteven | Wheels & Tires | 12 | 03-07-2014 04:33 AM |
Increasing sidewall height on stock Rays | wdkwang | Wheels & Tires | 17 | 10-27-2013 12:25 PM |
Crack in Sidewall - How bad? | Benadrylz | Wheels & Tires | 9 | 12-21-2012 06:17 PM |
Tire question about sidewall height in relation to ride height... | chuckd05 | Wheels & Tires | 2 | 05-07-2011 05:03 AM |
NISMO 370Z Front Tires and Ride Height | DIGItonium | Nismo 370Z | 0 | 01-04-2010 12:10 AM |