Who has the highest mileage 7AT? Issues with the tranny?

ssmoked

Since our 7 speed AT is maintenance free according to the service manual and dealer, I wonder if anyone ran into failures or issues with it with high mileage. Afterall, it is composed of moving parts. I also drive my vehicle hard, whenever I get the chance to.

I know someone that owns a Mercedes which also has the maintenance free transmission, it went out shortly after the warranty expired and it cost a testicle to replace.

I currently have about 48k, who has the highest mileage and what are you planning on doing with the maintenance?

1. Nothing as indicated by service manual
2. Try, tried or already changed the fluid somehow
3. ??

Huckleberry

i'm at 65k. No issues here.

09 Mag Black Base

__________________

DEpointfive0

I have changed the fluid... 3-4 times and I'm at 45-48k lol

__________________
Do YOU want to know what/where I got my username from?

ssmoked

How did you change the fluids? DIY next time please? From what I understood from the dealer, the automatic transmission is a closed unit...

NickTurnon

I am at 89K - No big issues yet...

I just got a CEL a day or two ago so I am sitting at Nissan right now waiting for them to tell me what's wrong with it. They wanted $120 to diagnose.. I want to know how plugging in a scanner cost $120.

I haven't done anything recently as far as modifications go and I still have the stock cats

__________________
2009 Brilliant Silver BASE 7AT | TEIN S-Tech Springs | K&N Drop Ins & z1 Maf Tubes | AAM S-Line Short Tails | 5% Tint | 20MM Spacers | Sport Spoiler NickTurnon's 370z Build

14ZTSport

Wow, I hope the $120 is waived if you have the work done there. A lot of garages tack on that ridiculous "fee" so you don't get them to diagnosis and then take car somewhere else for repairs.

oakland 9424

2013 370z sports package 2450(actual mileage).

Just sharing some info:

SERVICE BULLETIN 13-001A.

1).UPDATE NEEDED FOR THE ECM,
2).REPROGRAM TRANSMISSION CONTROL MODULE

Here's the error code they found: P0710
If you got this code, schedule an appointment to have it checked.
Just seen on forum and had it done under warranty 45,000 miles 2011

ssmoked

Was your check engine light on? How did you find out you needed it to be changed\ reprogrammed under warranty

nomodsjk

You have to go to auto zone and buy a scan gauge. The one I bought was 150 and I've had to use it several times to diagnose and clear codes and I've only owned my car since April. Also it plugs up to your obdII and works as a multi gauge. Definitely one of the best investments I've made since buying my car. I would recommend everyone who has a modified car to buy one. Even if your car isn't modded you'll still save money by reading the codes and just googling them for diagnosis. Saves you 120$ every time

kittens

Pep boys also checks codes for free

DEpointfive0

I didn't. I had the motor dropped, changed the radiator, then the trans line popped off, and I'm going to change the radiator again, lol.

Every time I talk to a factory mechanic, they tell me the same thing. We fill and drain it. No one follows the manual, it takes too long.


The service manual has that info and an IR thermometer is all you need

__________________
Do YOU want to know what/where I got my username from?

Land Cruiser

I have a 2011 with ~57K miles currently.

Transmission was replaced at ~33K miles. Symptoms were the car would stall out when put into gear (both reverse and drive). Was just like the torque converter was locked up. The transmission would still shift into gear.

Torque converter replaced at ~50K miles. Same symptoms as before. When the transmission was replaced, apparently the original torque converter was used.

Should add that both times, the valve body was replaced first to see if that would fix it, before they replaced the transmission and torque converter.

Haven't done any maintenance on transmission and don't plan on it.

I do drive it like a sports car, but have never been to a track.

DEpointfive0

Man that's a lot...

__________________
Do YOU want to know what/where I got my username from?

Limeybastard

Question to you. Occassionally I have noticed when I go into reverse ( twice so far ) the car seems to shake a little for a second or two almost like a manual wanting to stall but it doesnt it. Did you have this ?

Land Cruiser

No. I never got this. Both times there weren't any symptoms that I can tell, until it just died on the road.

I have something similar to what your talking about though. About 1 out of 20 times when coming to a complete stop at a traffic light, it would do it. RPM would drop like it would stall out, car shakes a little, but it would correct itself. I've read about it a bit and cleaning the throttle body is supposed to fix it. There is a Tech Bulletin out on this. I've cleaned the driver's side one, (just too lazy to do the other side for now) and it didn't seem all that dirty to me. I might clean the other side today.

What I do have when going into reverse (or into drive from reverse, or just letting off the gas) is a "clink" sound. Can't hear it with windows up, but for sure can hear it with it down and having something near by to bounce the sound back to you. There is a Tech Bulletin for this also. Supposedly the axle nut has worked its way loose and needs to be re-torqued. A cotter pin is keeping it from coming all the way loose.