Guessing HP

zae757 · 07-30-2014, 09:09 PM

I currently have a base 370z 2010. I've added several aftermarket parts for performance and haven't been able to find a shop to tune it in my area (that and my job keeps me too busy to do so). I was wondering if anyone could guesstimate the horsepower just by the parts (and if anyone has the exact match with tune, it'll be great)...

1. Stillen Gen 3 intake

2. Injen CBE

3. Berk HFC

And soon to be Stillen headers. I only want to do all motor. FI sounds nice and the numbers are great but I just don't want that headache if not put on properly. Any assistance with this would be great...

madwi · 07-30-2014, 09:15 PM

302 my guess.

Grindkiezer · 07-30-2014, 09:26 PM

295

falconfixer · 07-30-2014, 09:30 PM

Less than what Nissan advertises the horsepower to be on the 370Z

disclaimer: Nissan advertises crank hp. **** waving with the FRS crowd adds 10 more hp to the crank ~ 2 hp to the wheels

zae757 · 07-30-2014, 09:42 PM

Question is, are there people out there that are willing to post there all motor dyno sheets? I'd love to compare and contrast until I'm able to hit a tuner shop

madwi · 07-30-2014, 09:45 PM

Tuning - Nissan 370Z Forum
Start looking around in that sub. there are lots of dyno charts available that show base line HP with mods before tuning.

aszyd · 07-30-2014, 09:47 PM

I'm driving up to Z1 on Friday. I'll post up the results when I get back.

Intake, Bored Throttle bodies, Z1 Upper Manifold, LT Headers, CBE, Pulley, Flywheel.

enkei2k · 07-30-2014, 09:47 PM

Aviator44 · 07-30-2014, 11:07 PM

200 < hp < OO

313

jaedub · 07-31-2014, 02:49 AM

308 whp. Btw, Stillen headers are not worth the trouble. The gain from the header is very poor. The stock headers are well made; it even has heat shield.

Zteve · 07-31-2014, 07:27 AM

Quote:

Originally Posted by falconfixer

Less than what Nissan advertises the horsepower to be on the 370Z

disclaimer: Nissan advertises crank hp. **** waving with the FRS crowd adds 10 more hp to the crank ~ 2 hp to the wheels

and way less than what the makers of those add ons claim the HP increase is as well. only true way to tell is to do a before and after dyno with a tune. yeah i know there have been proven increases with some mods (like the FI exhaust and the stillen G3) and those are the exception.

Quote:

Originally Posted by jaedub

308 whp. Btw, Stillen headers are not worth the trouble. The gain from the header is very poor. The stock headers are well made; it even has heat shield.

yeah, never understood why to take off perfectly good factory headers to add headers

i can see it on the older 350z that had the cast ones vs true headers that was a increase when you added them. cost vs gain with the 370z is not worth it IMO

synolimit · 07-31-2014, 07:43 AM

Quote:

Originally Posted by aszyd

I'm driving up to Z1 on Friday. I'll post up the results when I get back.

Intake, Bored Throttle bodies, Z1 Upper Manifold, LT Headers, CBE, Pulley, Flywheel.

Make sure they use SAE!

mab864 · 07-31-2014, 08:51 AM

Completely stock 370s put down about 280 whp. Mine was 297 whp with a Stillen G3 intake, Berk HFC & Berk CBE on a Dynojet. After Uprev and custom tune I was 324 whp on the same Dynojet. My numbers are very typical with those mods and a tune. The tune made by far the biggest improvement in performance. The exhaust made the car sound great, but the tune improved drivability, throttle response, and performance.

ssmoked · 07-31-2014, 08:57 AM

Quote:

Originally Posted by mab864

Completely stock 370s put down about 280 whp. Mine was 297 whp with a Stillen G3 intake, Berk HFC & Berk CBE on a Dynojet. After Uprev and custom tune I was 324 whp on the same Dynojet. My numbers are very typical with those mods and a tune. The tune made by far the biggest improvement in performance. The exhaust made the car sound great, but the tune improved drivability, throttle response, and performance.

Dynojet is too optimistic. I used Mustang Dyno and I got 261 whp for the stock Z.

mab864 · 07-31-2014, 08:59 AM

Oh yes... the heart breaker. lol.

07-30-2014, 09:09 PM	#1 (permalink)
zae757 Base Member Join Date: Oct 2013 Location: Fort Dix, NJ Posts: 167 Drives: 2010 370Z Rep Power: 12	Guessing HP I currently have a base 370z 2010. I've added several aftermarket parts for performance and haven't been able to find a shop to tune it in my area (that and my job keeps me too busy to do so). I was wondering if anyone could guesstimate the horsepower just by the parts (and if anyone has the exact match with tune, it'll be great)... 1. Stillen Gen 3 intake 2. Injen CBE 3. Berk HFC And soon to be Stillen headers. I only want to do all motor. FI sounds nice and the numbers are great but I just don't want that headache if not put on properly. Any assistance with this would be great...

07-30-2014, 09:15 PM	#2 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	302 my guess. onzedge, FPenvy, jpkirk and 2 others like this.

07-30-2014, 09:26 PM	#3 (permalink)
Grindkiezer Track Member Join Date: Sep 2012 Location: San Diego Posts: 824 Drives: A Car Rep Power: 14	295 __________________ Z

07-30-2014, 09:30 PM	#4 (permalink)
falconfixer Track Member Join Date: Feb 2012 Location: 10aC Posts: 978 Drives: Taco Rep Power: 76	Less than what Nissan advertises the horsepower to be on the 370Z disclaimer: Nissan advertises crank hp. **** waving with the FRS crowd adds 10 more hp to the crank ~ 2 hp to the wheels onzedge likes this.

07-30-2014, 09:45 PM	#6 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Tuning - Nissan 370Z Forum Start looking around in that sub. there are lots of dyno charts available that show base line HP with mods before tuning. Last edited by madwi; 07-30-2014 at 10:02 PM.

07-30-2014, 09:42 PM	#5 (permalink)
zae757 Base Member Join Date: Oct 2013 Location: Fort Dix, NJ Posts: 167 Drives: 2010 370Z Rep Power: 12	Question is, are there people out there that are willing to post there all motor dyno sheets? I'd love to compare and contrast until I'm able to hit a tuner shop

07-30-2014, 09:47 PM	#7 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	I'm driving up to Z1 on Friday. I'll post up the results when I get back. Intake, Bored Throttle bodies, Z1 Upper Manifold, LT Headers, CBE, Pulley, Flywheel. synolimit likes this. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

07-30-2014, 09:47 PM	#8 (permalink)
enkei2k A True Z Fanatic Join Date: Apr 2011 Location: NYC Posts: 6,365 Drives: '12 G41 B/S M6 Rep Power: 3716	__________________ ...need boost...

07-30-2014, 11:07 PM	#9 (permalink)
Aviator44 Enthusiast Member Join Date: May 2014 Location: Pensacola, FL Posts: 299 Drives: AAM Twin Turbo 370Z Rep Power: 11	200 < hp < OO 313 __________________ www.aamcompetition.com AAM Twin Turbo System

07-31-2014, 02:49 AM	#10 (permalink)
jaedub Track Member Join Date: Aug 2010 Location: Los Angeles Posts: 906 Drives: 2010 Black 370Z MT Rep Power: 305	308 whp. Btw, Stillen headers are not worth the trouble. The gain from the header is very poor. The stock headers are well made; it even has heat shield.

07-31-2014, 08:51 AM	#13 (permalink)
mab864 Enthusiast Member Join Date: Nov 2013 Location: Oregon Posts: 482 Drives: 13 Sport 6MT Rep Power: 12	Completely stock 370s put down about 280 whp. Mine was 297 whp with a Stillen G3 intake, Berk HFC & Berk CBE on a Dynojet. After Uprev and custom tune I was 324 whp on the same Dynojet. My numbers are very typical with those mods and a tune. The tune made by far the biggest improvement in performance. The exhaust made the car sound great, but the tune improved drivability, throttle response, and performance. __________________ Berk HFC & CBE, Stillen G3, UpRev & tune by PSI, GTMat, 3M, Swift, StopTech, H&R 20/25, GT-R, 324 whp & 262 torque

07-31-2014, 08:59 AM	#15 (permalink)
mab864 Enthusiast Member Join Date: Nov 2013 Location: Oregon Posts: 482 Drives: 13 Sport 6MT Rep Power: 12	Oh yes... the heart breaker. lol. __________________ Berk HFC & CBE, Stillen G3, UpRev & tune by PSI, GTMat, 3M, Swift, StopTech, H&R 20/25, GT-R, 324 whp & 262 torque