Hey guys, I'm new on here - just bought a '12 Certified Pre-Owned 370Z NISMO 7 weeks back. Well, I had an issue with the clutch pedal having a tapping
|
|
LinkBack | Thread Tools | Display Modes |
07-23-2014, 07:40 PM | #1 (permalink) |
Base Member
Join Date: Jun 2014
Location: Nismo
Posts: 61
Drives: 2012 370Z NISMO
Rep Power: 11 |
Next step?
Hey guys,
I'm new on here - just bought a '12 Certified Pre-Owned 370Z NISMO 7 weeks back. Well, I had an issue with the clutch pedal having a tapping when the pedal was depressed, so I brought it in to have it looked at. The dealership has had the car for 3 weeks and has replaced the clutch assy, throwout bearing, clutch pedal, and just recently the dual mass flywheel. The dual mass flywheel ended up fixing the issue (see thread here with updates about the issue: 370z 6MT Clutch Tapping - Nissan Forums : Nissan Forum). When I went to pick it up today, I found that they dented the plastic side skirt right behind the driver's front wheel. It's gouged in pretty decent in two spots (one right above the other) and they're very obvious. There's also another scuff further back, almost in the dead center of the skirt. They suggested that they can fix it, but I don't know how it's going to match being Pearl White. I told them that they essentially just bought the car back from me, but I was wondering if it was worthwhile giving them a shot to order a new side skirt and have it painted. I know Pearl White is near impossible to match, so is it worthwhile to even have them try it? I'm ridiculously particular about my cars. Any/all opinions or advise would be greatly appreciated. Thanks!
__________________
2012 Nissan 370z NISMO (Fast Intentions Non-Resonated TDX)
2016 Infiniti Q50 3.0tt AWD Premium+ 2012 Nissan Xterra Pro-4X |
07-23-2014, 08:19 PM | #4 (permalink) |
Enthusiast Member
Join Date: Apr 2011
Location: Maryland
Posts: 498
Drives: '11 370z MB 6MT SP
Rep Power: 14 |
i think you are underestimating the ability to match your paint, but i'm no expert.
__________________
2011 Nissan 370z | 6MT | Magnetic Black | Sport Package |
07-23-2014, 08:20 PM | #5 (permalink) |
Track Member
Join Date: Feb 2012
Location: 10aC
Posts: 978
Drives: Taco
Rep Power: 76 |
When I bought my Silver 2011 new it had a scratch on the driver's door. They assured me they could buff it out and had their best dishwasher repairman/body guy on the job. Less than a year later I had to have the driver's side rear quarter fixed because some twatwaffle dented it in. When I traded it in the driver's side was 3 different shades of silver. Albeit, very hard to tell but from an anal retentive prick like myself, it was noticeable.
So, good luck having them match up the Pearl White and you not wanting to burn the car to the ground if you are particular about it like I was. |
07-23-2014, 09:33 PM | #6 (permalink) |
A True Z Fanatic
Join Date: Feb 2011
Location: Irvine
Posts: 1,682
Drives: 13 PW sport 6mt
Rep Power: 18 |
PW body panels are all different from the factory anyway. I assure you the parts that are metal (al) vs the parts that are plastic look completely different depending on the lighting situation and the angle that you're looking at.
I'd say relax and have them fix it.
__________________
35% Hooper Optik | Takeda Attack CAI | F.I. HFC | Hotchkis Sway Bar | Stillen 24row | OS Giken Super Lock LSD | TK Shift Knob | EVO-R Carbon Diffuser
|
07-24-2014, 09:57 AM | #7 (permalink) | |
Base Member
Join Date: Apr 2013
Location: Orlando, FL
Posts: 144
Drives: Like OJ In A Bronco
Rep Power: 12 |
Quote:
__________________
LLUMAR TINT 15% l ARK GT-S SPRINGS l STILLEN GEN 3 C.A.I l MOMO SHIFTER l Z1 SPACERS 20MM (F)/25MM (R).....STILL LOADING |
|
07-24-2014, 11:05 AM | #8 (permalink) | ||
Base Member
Join Date: Jun 2014
Location: Nismo
Posts: 61
Drives: 2012 370Z NISMO
Rep Power: 11 |
Thanks to those who provided valuable input. The most frustrating part of this is that they're claiming that because I have the paint protection film on the car (bought it from them with the film on there already), that the damage could not have been caused while the film was on there. I have pictures that prove I bought it without any damage (with the film on) and yet they're refusing to acknowledge that they did it stating that, "we don't look over the cars to that level of detail when they come in" and that because we're "valued customers" they're willing to fix it. I know the body shop that they use and there aren't many reviews out there, but the one that is there states they have horrible customer service and don't take responsibility for their mistakes. I might go by the dealership just to get pictures of the damage and talk to the service manager since I was so frustrated that I didn't even think to get any pics and he wasn't there when I went to pick it up.
Quote:
Quote:
|
||
07-24-2014, 12:08 PM | #9 (permalink) | |
A True Z Fanatic
Join Date: Apr 2013
Location: Cali State Hospital
Posts: 13,351
Drives: 2017 Corvette Z06
Rep Power: 458713 |
Quote:
first class reputable body shop. The dealership will pay the bill. Move on... Then again I'm not a real doctor..GL |
|
07-24-2014, 10:57 PM | #11 (permalink) |
Base Member
Join Date: Jun 2014
Location: Nismo
Posts: 61
Drives: 2012 370Z NISMO
Rep Power: 11 |
I'd bet that if your dealership damaged your NISMO Z you'd be just as upset and concerned about the paint color match as I am. It may be easy for you to say to put it in a first class reputable body shop since there are plenty out on the west coast, but it's a bit more difficult finding a decent shop over here on the east coast in Massachusetts, Rhode Island, Connecticut. Part of the issue is that I've been lucky enough to not have to deal with body shops before so I don't know of any. Any suggestions?
|
07-24-2014, 11:01 PM | #12 (permalink) |
A True Z Fanatic
Join Date: Apr 2012
Location: Florida
Posts: 4,105
Drives: Spirited
Rep Power: 11716 |
Sorry to hear, what a pain.
__________________
2012 Z-SOLD 2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq |
07-25-2014, 02:47 AM | #13 (permalink) |
A True Z Fanatic
Join Date: Apr 2012
Location: SoCal
Posts: 6,235
Drives: WELL ZED PW 6MT
Rep Power: 53241 |
They will take it to their body shop and it is usually not in-house unless it is for basic, run off the mill body work. I'd say let them do it and if you are not happy, they get to start over.
__________________
>MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete
|
07-25-2014, 11:11 PM | #15 (permalink) | |
Base Member
Join Date: Jun 2014
Location: Nismo
Posts: 61
Drives: 2012 370Z NISMO
Rep Power: 11 |
Quote:
Anyway.. I spoke with the service manager and I picked up the car today. They're going to let me look around and find a shop that will end up doing the work. I found one today with a 4.9 out of 5 star rating with 32 reviews. Spoke with the owner and he said that they can paint if without blending into the doors or fenders. Visited the place and looked at some of the cars that they recently painted. One was a fairly new pearlescent blue BMW Z4 which had a new bumper. The paint between the hood, fenders, and bumper matched pretty much dead on from all of the angles that I saw. Another was a 2000 Toyota Camry that was side swiped (paint was faded a bit) and they also matched the color really well. |
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Change engine oil step by step | stivs370z | DIY Section (Do-It-Yourself) | 31 | 07-28-2014 09:45 AM |
[FOR SALE] WORK Gnosis GS4 Step Lip 20 inch Step Lip | Storm | Parts for sale (Private Classifieds) | 30 | 03-20-2014 02:02 PM |
my first step -_- | elia_ebyss | Forced Induction | 45 | 09-13-2013 11:33 AM |
WOT box 2-step | NIZZING | Forced Induction | 14 | 02-14-2013 11:32 PM |
Red GT-R Push Start Button Installation Step by Step~~~Super easy! | cycy89 | DIY Section (Do-It-Yourself) | 25 | 03-31-2012 11:52 PM |