And the crannies! Don't forget the crannies.

:icon17:

I'm a 20-something. I bought the car myself.

Agree with DE, this forum cannot turn into my350z...

"Yo I jus raced a [Insert Muscle Car Here] on the highway and smoked his azz. hella flush. blast pipes were soundin sick."

This post is hella dope. :icon17:

Werd! :bowrofl:

To save time allowing for more bragging about street racing with aftermarket wheels, I would suggest:

1.) A paint coating on the wheels like Opti-Coat or CQuartz to limit brake dust adhesion to the wheels and make cleaning 2x easier:

http://www.detailersdomain.com/thumb...axx=150&maxy=0

http://www.detailersdomain.com/Optim...t-2_p_326.html

2.) A microfiber wand to easily reach the barrel and the tight space between the barrel and the calipers.

http://www.homedepot.com/catalog/pro...929ace_400.jpg

Then you can look even better when doing this:

lol ^ what... an idiot. Going to run away from a highly tuned v8 cop car....and a radio than call for back up. Very smart.


Funny video though :D

Don't know as I've never used sonax stuff before or watched any of their product videos. I've used brake dust pro before, sprayed it liberally on the wheels and allowed it to sit for a few minutes. Hose it off and it removes 95% of the gunk. Might have to get into the tight angles with a brush but the hard part is already done.

Hawk HPS FTW.