Need Some Advice - Paintless Dent Removale

onzedge · 07-07-2014, 06:38 PM

Quote:

Originally Posted by Malm

I have a tiny dent in the driver side fender.. which did not chip the paint..just put a little divit there (its something that no one notices unless you point it out).

Its bothered me for quite a while.. have to research how much a PDR guy would charge to pop it out.

Go for it.

Malm · 07-07-2014, 06:41 PM

Quote:

Originally Posted by onzedge

Go for it.

what is funny, is I called up to get a quote.. and got the answering machine... and As I was leaving the message.. I couldn't find the dent on the fender lol. I knew it was there.. and the 15 seconds of the message of me going wait.. where is it.. thought it was right there... oh yeah , there it is.. will probably make the guy think twice to call me back.

onzedge · 07-07-2014, 06:43 PM

Quote:

Originally Posted by Malm

what is funny, is I called up to get a quote.. and got the answering machine... and As I was leaving the message.. I couldn't find the dent on the fender lol. I knew it was there.. and the 15 seconds of the message of me going wait.. where is it.. thought it was right there... oh yeah , there it is.. will probably make the guy think twice to call me back.

mab864 · 07-07-2014, 07:07 PM

I've had good luck with PDR too. I've used them a couple of times. Once on another one of my vehicles and once on my company truck. Same guy both times and I would put him in the magician category too. Just amazing what one of these guys can do.

cigarclifford · 07-07-2014, 08:09 PM

Quote:

Originally Posted by Malm

what is funny, is I called up to get a quote.. and got the answering machine... and As I was leaving the message.. I couldn't find the dent on the fender lol. I knew it was there.. and the 15 seconds of the message of me going wait.. where is it.. thought it was right there... oh yeah , there it is.. will probably make the guy think twice to call me back.

Sounds just like my removed door dent - crease. It could only be seen
at a certain angle and certain light... It really pppped me off but now its gone..
Go for it....

kenchan · 07-07-2014, 08:13 PM

when i practiced PDR i literally hit my newish car with golf balls to make dings all over the car. fender, door, hood, roof, quarter panel, trunk.

neighbors were like WTF!!

dealer was happy to see my dent-free car when it came time to trade it in.

i didnt say nothin'

onzedge · 07-07-2014, 08:22 PM

Quote:

Originally Posted by kenchan

when i practiced PDR i literally hit my newish car with golf balls to make dings all over the car. fender, door, hood, roof, quarter panel, trunk.

neighbors were like WTF!!

dealer was happy to see my dent-free car when it came time to trade it in.

i didnt say nothin'

Mr. Kenchan has written.

cigarclifford · 07-07-2014, 08:35 PM

Quote:

Originally Posted by kenchan

when i practiced PDR i literally hit my newish car with golf balls to make dings all over the car. fender, door, hood, roof, quarter panel, trunk.

neighbors were like WTF!!

dealer was happy to see my dent-free car when it came time to trade it in.

i didnt say nothin'

Your neighborhood is very fortunate to have you around. You have my
serious respect and my vote for extreme confidence..

chops · 07-07-2014, 08:46 PM

creases are heart breaking. they never look 100%, at least not that ive seen

kenchan · 07-07-2014, 08:55 PM

Quote:

Originally Posted by chops

creases are heart breaking. they never look 100%, at least not that ive seen

You debbie downer?

chops · 07-07-2014, 09:02 PM

Quote:

Originally Posted by kenchan

You debbie downer?

just a little bit.

mab864 · 07-07-2014, 11:13 PM

Here's a video on PDR if you're interested. Pretty comprehensive look at the process. Larry is $$$ for sure... a little OCD... but $$$ for sure. Take a look here. Paintless Dent Repair | AMMO NYC

cigarclifford · 07-07-2014, 11:24 PM

[QUOTE=mab864;2887197]Here's a video on PDR if you're interested. Pretty comprehensive look at the process. Larry is $$$ for sure... a little OCD... but $$$ for sure. Take a look here.
Outstanding....Thank you for sharing this short video with all of us...

aszyd · 07-07-2014, 11:52 PM

Quote:

Originally Posted by mab864

Here's a video on PDR if you're interested. Pretty comprehensive look at the process. Larry is $$$ for sure... a little OCD... but $$$ for sure. Take a look here. Paintless Dent Repair | AMMO NYC

I have seen the Ammo / Drive Clean videos. Love them. Love most of the stuff from the Drive Network. People should definitely check out the Drive Clean vids for tips on making their car beautiful.

07-07-2014, 07:07 PM	#19 (permalink)
mab864 Enthusiast Member Join Date: Nov 2013 Location: Oregon Posts: 482 Drives: 13 Sport 6MT Rep Power: 12	I've had good luck with PDR too. I've used them a couple of times. Once on another one of my vehicles and once on my company truck. Same guy both times and I would put him in the magician category too. Just amazing what one of these guys can do. __________________ Berk HFC & CBE, Stillen G3, UpRev & tune by PSI, GTMat, 3M, Swift, StopTech, H&R 20/25, GT-R, 324 whp & 262 torque

07-07-2014, 08:13 PM	#21 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	when i practiced PDR i literally hit my newish car with golf balls to make dings all over the car. fender, door, hood, roof, quarter panel, trunk. neighbors were like WTF!! dealer was happy to see my dent-free car when it came time to trade it in. i didnt say nothin' onzedge and cigarclifford like this.

07-07-2014, 11:13 PM	#27 (permalink)
mab864 Enthusiast Member Join Date: Nov 2013 Location: Oregon Posts: 482 Drives: 13 Sport 6MT Rep Power: 12	Here's a video on PDR if you're interested. Pretty comprehensive look at the process. Larry is $$$ for sure... a little OCD... but $$$ for sure. Take a look here. Paintless Dent Repair \| AMMO NYC aszyd likes this. __________________ Berk HFC & CBE, Stillen G3, UpRev & tune by PSI, GTMat, 3M, Swift, StopTech, H&R 20/25, GT-R, 324 whp & 262 torque

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I'm looking for a reputable Paintless Dent Removal Shop on LI	Cmike2780	North East Region	5	08-03-2012 11:58 AM
Before and after of paintless dent repair	Shadax	Exterior & Interior	4	04-25-2012 12:48 PM
paintless dent removal so cal	rdt7	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	0	02-16-2012 07:08 PM
Paintless Dent Removals/Repairs	delusional	North East Region	5	07-26-2011 03:12 PM
Paintless Dent Repair	Jason	South East Region	2	07-16-2009 11:56 PM

07-07-2014, 08:46 PM	#24 (permalink)
chops A True Z Fanatic Join Date: Oct 2010 Location: NA Posts: 1,732 Drives: NA Rep Power: 22	creases are heart breaking. they never look 100%, at least not that ive seen

07-07-2014, 11:24 PM	#28 (permalink)
cigarclifford A True Z Fanatic Join Date: Apr 2013 Location: Cali State Hospital Posts: 13,351 Drives: 2017 Corvette Z06 Rep Power: 458713	[QUOTE=mab864;2887197]Here's a video on PDR if you're interested. Pretty comprehensive look at the process. Larry is $$$ for sure... a little OCD... but $$$ for sure. Take a look here. Outstanding....Thank you for sharing this short video with all of us...