What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

Spooler · 05-22-2017, 04:03 PM

Change the fluid and see what happens. I would suggest to suck the old fluid out of the reservoir, wipe the nasty out with a paper towel that doesn't leave lint, refill and gravity bleed it. I use Motul RBF 600. It has been working great. You will need to change the fluid again at the next oil change/3000 miles.

DeliriousClam · 05-22-2017, 04:06 PM

Quote:

Originally Posted by Spooler

Change the fluid and see what happens. I would suggest to suck the old fluid out of the reservoir, wipe the nasty out with a paper towel that doesn't leave lint, refill and gravity bleed it. I use Motul RBF 600. It has been working great. You will need to change the fluid again at the next oil change/3000 miles.

trust me I plan on changing it. I'm going to order a stainless steel line also so I'm going to wait for that to arrive. Until then I'm going to rock the winter beater

jwick · 05-22-2017, 04:31 PM

The dirty fluid is from the OEM CSC seals letting go. Unfortunately it's very common for this tranny. I lost mine at 1,200miles on the car. The OEM replacement lasted until I replaced it as part of my turbo build at 43k.

If you are emptying the master cylinder then it's highly recommended to replace it too. It's basically a one time use item.

DeliriousClam · 05-22-2017, 04:33 PM

Quote:

Originally Posted by jwick

The dirty fluid is from the OEM CSC seals letting go. Unfortunately it's very common for this tranny. I lost mine at 1,200miles on the car. The OEM replacement lasted until I replaced it as part of my turbo build at 43k.

If you are emptying the master cylinder then it's highly recommended to replace it too. It's basically a one time use item.

I was reading that, since it's brown, it could just be because it's old fluid that has boiled. I have no idea if the fluid has ever been changed

DeliriousClam · 05-22-2017, 08:18 PM

I flushed most of the clutch fluid. Emptied the reservoir, filled with clean fluid, pumped the clutch ~100 times, emptied the reservoir again and repeated until the fluid remained clean. Now I know it won't be a full flush until I use the bleeder underneath but this changed most of it.

Before:

After:

Rusty · 05-22-2017, 11:52 PM

Today, I washed 9 hours of rain, and road grim off the Z. It rained almost all the way home from ZDayZ. I also found a piece of someone's tire stuck in my grille screen.

Who ever I was following on the Dragon must been chucking a tire.

And I had some black marks on the front bumper and hood.

Tomorrow, I have to clean out the inside. Have cookie crumbs, nuts and snacks that got dropped during the trip.

Spooler · 05-23-2017, 12:03 AM

Quote:

Originally Posted by Rusty

Today, I washed 9 hours of rain, and road grim off the Z. It rained almost all the way home from ZDayZ. I also found a piece of someone's tire stuck in my grille screen.

Who ever I was following on the Dragon must been chucking a tire.

And I had some black marks on the front bumper and hood.

Tomorrow, I have to clean out the inside. Have cookie crumbs, nuts and snacks that got dropped during the trip.

Cookie Monster ^^^^^^^^

Rusty · 05-23-2017, 12:12 AM

Quote:

Originally Posted by Spooler

Cookie Monster ^^^^^^^^

When we take a trip. It's teriyaki beef jerky, pretzel rods, nuts, cookies, ice tea, and gator aide.

ramoszx12r · 05-23-2017, 04:33 AM

#1 rule no food on my, still smell like new.

jchammond · 05-23-2017, 04:50 AM

Had A Great Time @Zdayz & met some Great People!

Sent from my iPhone using Tapatalk

carlitos_370z · 05-23-2017, 07:46 AM

Nice pics my friend!

onzedge · 05-23-2017, 08:04 AM

Quote:

Originally Posted by carlitos_370z

Nice pics my friend!

ChopsZ · 05-25-2017, 01:30 AM

Today is May 25th, 2017. Exactly a year ago, I purchased my Z, on May 25th, 2016, with only 14 miles on it.

Something I've been wanting to do for a very long time is some suspension stuff.

So with that in mind, and as a little celebration of sorts, just a few minutes ago I ordered a set of ARK GT-S springs, SPL rear camber links, and SPL lockout bolts. So a little more attitude with a little less altitude.

Needless to say, I'm a bit excited.

One last thing I would like to possibly do is maybe some small wheel spacers just to being these Nismo wheels (and stock tire sizes) out a touch further. Need to find out what sizes would work.

jchammond · 05-25-2017, 04:58 AM

Quote:

Originally Posted by ChopsZ

Today is May 25th, 2017. Exactly a year ago, I purchased my Z, on May 25th, 2016, with only 14 miles on it.

Something I've been wanting to do for a very long time is some suspension stuff.

So with that in mind, and as a little celebration of sorts, just a few minutes ago I ordered a set of ARK GT-S springs, SPL rear camber links, and SPL lockout bolts. So a little more attitude with a little less altitude.

Needless to say, I'm a bit excited.

One last thing I would like to possibly do is maybe some small wheel spacers just to being these Nismo wheels (and stock tire sizes) out a touch further. Need to find out what sizes would work.

You're gonna have people chime in who's been there & done that w/their Nismo...common fitment is +20---+25 up front & +10---+15 rear.
Your factory wheels are +40F/+23R.
So 15-20mm up front & around 10mm/R,
Wait till after your suspension mods/alignment & make a plumb line on level ground-then measure up your gaps....you may want to be conservative or aggressive.

.
That would be my recommendation,so you can get the fitment you desire.

Sent from my iPhone using Tapatalk

l2iceman · 05-25-2017, 08:51 AM

Did z1 post maf tubes + k&n drop ins, installed swift springs and 20/25mm spacers! Also put in backup camera integrated into the oem navi over the weekend. Will be doing test pipes and exhaust soon.

Sent from my SM-N920W8 using Tapatalk

05-22-2017, 04:03 PM	#9886 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,830 Drives: 2013 Nismo 370z Rep Power: 2684392	Change the fluid and see what happens. I would suggest to suck the old fluid out of the reservoir, wipe the nasty out with a paper towel that doesn't leave lint, refill and gravity bleed it. I use Motul RBF 600. It has been working great. You will need to change the fluid again at the next oil change/3000 miles. Jayhovah likes this.

05-22-2017, 04:31 PM	#9888 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	The dirty fluid is from the OEM CSC seals letting go. Unfortunately it's very common for this tranny. I lost mine at 1,200miles on the car. The OEM replacement lasted until I replaced it as part of my turbo build at 43k. If you are emptying the master cylinder then it's highly recommended to replace it too. It's basically a one time use item. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

05-22-2017, 08:18 PM	#9890 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	I flushed most of the clutch fluid. Emptied the reservoir, filled with clean fluid, pumped the clutch ~100 times, emptied the reservoir again and repeated until the fluid remained clean. Now I know it won't be a full flush until I use the bleeder underneath but this changed most of it. Before: After: Rusty, Hotrodz, carlitos_370z and 3 others like this. __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

05-22-2017, 11:52 PM	#9891 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Today, I washed 9 hours of rain, and road grim off the Z. It rained almost all the way home from ZDayZ. I also found a piece of someone's tire stuck in my grille screen. Who ever I was following on the Dragon must been chucking a tire. And I had some black marks on the front bumper and hood. Tomorrow, I have to clean out the inside. Have cookie crumbs, nuts and snacks that got dropped during the trip. Hotrodz likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

05-23-2017, 04:33 AM	#9894 (permalink)
ramoszx12r Track Member Join Date: Sep 2015 Location: Carneys point NJ Posts: 665 Drives: 16 370Z Nismo White. Rep Power: 1428	#1 rule no food on my, still smell like new. __________________ Tony Ramos

05-23-2017, 04:50 AM	#9895 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Had A Great Time @Zdayz & met some Great People! Sent from my iPhone using Tapatalk onzedge, Hotrodz, Latt and 4 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

05-23-2017, 07:46 AM	#9896 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	Nice pics my friend! jchammond likes this.

05-25-2017, 01:30 AM	#9898 (permalink)
ChopsZ Track Member Join Date: May 2016 Location: Central Florida Age: 49 Posts: 965 Drives: 2016 370Z GM 6MT Rep Power: 2301	Today is May 25th, 2017. Exactly a year ago, I purchased my Z, on May 25th, 2016, with only 14 miles on it. Something I've been wanting to do for a very long time is some suspension stuff. So with that in mind, and as a little celebration of sorts, just a few minutes ago I ordered a set of ARK GT-S springs, SPL rear camber links, and SPL lockout bolts. So a little more attitude with a little less altitude. Needless to say, I'm a bit excited. One last thing I would like to possibly do is maybe some small wheel spacers just to being these Nismo wheels (and stock tire sizes) out a touch further. Need to find out what sizes would work. ChaseZ and ScottM like this. __________________ She's For Sale! PERFORMANCE: Aero Workz \| Akebono \| BC Racing \| EcuTek \| HKS \| MaxBore \| Motordyne \| Nismo \| RJM \| SPL \| StopTech \| Z1 AUDIO: Arc Audio \| Bazooka \| Helix \| Pioneer \| Stereo Integrity Last edited by ChopsZ; 05-25-2017 at 01:34 AM.

05-25-2017, 08:51 AM	#9900 (permalink)
l2iceman Base Member Join Date: Oct 2014 Location: Toronto, Canada Posts: 126 Drives: '10 370z Rep Power: 240	Did z1 post maf tubes + k&n drop ins, installed swift springs and 20/25mm spacers! Also put in backup camera integrated into the oem navi over the weekend. Will be doing test pipes and exhaust soon. Sent from my SM-N920W8 using Tapatalk carlitos_370z and Memphis370Z like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM