What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

ChaseZ · 03-18-2017, 07:14 PM

Quote:

Originally Posted by mishuko

Yea I'll toss a dab or two on. It's still sleeping so it should be cured by time spring comes around.

2days later will have to prep to sleep again at this rate. Had more snow today

Edit stupid pictures have to always upload backwards lol

That blue loctite sets up rally fast. Like five minutes.

+14c here today. No complaints!

ChaseZ · 03-18-2017, 07:17 PM

Quote:

Originally Posted by mishuko

Installed the hebi bebi, clear dome lights and the gtr red start button.

Oem knob had no loctite yay! I need to add a bumper or something so turtle will face forward

Uh pics will follow.

Think that's a first lol

Must have been built on a Friday.
Mine was certainly Monday. Before sake break

OTW Z-Boy · 03-18-2017, 07:23 PM

Quote:

Originally Posted by ChaseZ

Think that's a first lol

Must have been built on a Friday.

Mine was certainly Monday. Before sake break

Right!

I had to mangle my oem to get that thing off.

mishuko · 03-18-2017, 07:25 PM

Quote:

Originally Posted by ChaseZ

Think that's a first lol

Must have been built on a Friday.
Mine was certainly Monday. Before sake break

Yea just had to wrap in some mf and just went hard. Can't complain

kenchan · 03-18-2017, 07:48 PM

Quote:

Originally Posted by mishuko

Yea I'll toss a dab or two on. It's still sleeping so it should be cured by time spring comes around.

2days later will have to prep to sleep again at this rate. Had more snow today

Edit stupid pictures have to always upload backwards lol

u need to make a finisher for it or a new boot. i made my own for my TWM a while back using a ballcock shank washer. u sand it down until it's low profile. some guy with a 350Z made one too... i thought he copied me to make his flashy DIY....

but might be just coincidence. anyway, u will need to make a spacer inside da boot though on the shaft to make it sit right.

i use those wireshelf packaging material spacers. they work perfect.

mishuko · 03-18-2017, 08:08 PM

Quote:

Originally Posted by kenchan

u need to make a finisher for it or a new boot. i made my own for my TWM a while back using a ballcock shank washer. u sand it down until it's low profile. some guy with a 350Z made one too... i thought he copied me to make his flashy DIY....

but might be just coincidence. anyway, u will need to make a spacer inside da boot though on the shaft to make it sit right.

i use those wireshelf packaging material spacers. they work perfect.

I pulled my boot up and it sits right now. I'll play with it and see how it works but yea it needs like 1cm higher for it to sit perfectly flush. Without dropping. Time to start go ogling

OTW Z-Boy · 03-18-2017, 08:39 PM

You can always do that rubber washer trick that worked really well. Was in the "how to align the turtle" thread

jchammond · 03-19-2017, 07:20 AM

yesterday I opened up fuel system; thinking I may have gotten bad gas/mixed some with water to ensure no ethanol.
Just hasn't ran the same since last fill up & was actually sputtering & would not rev up...?
No cel light & no way of watching data while driving right now.
So checked all electrical connectors,vacuum,etc...all good.
Gotta get a fuel pressure gauge;but it's running fine now.

Sent from my iPhone using Tapatalk

chubbs · 03-19-2017, 07:44 AM

Did a black gloss vinyl roof wrap. Took me 3.5 hours. Happy with the result...

kenchan · 03-19-2017, 07:46 AM

dat black gloss looks good.

but ur plants need cpr..

chubbs · 03-19-2017, 08:39 AM

Quote:

Originally Posted by kenchan

dat black gloss looks good.

but ur plants need cpr..

lol it's a copper beech hedge - give it 4 weeks of spring weather and it will be beautiful.

Stillen · 03-19-2017, 11:27 AM

Here is the test on impeller

https://www.facebook.com/AiltonLGuim...8841080886969/

kenchan · 03-19-2017, 11:35 AM

motored my Z.. had a good drive. car felt so slow at first especially since my other cars are turbo's with lots of torque.

after a bit of spirited driving da ECU finally woke up and started putting out some real power out of da VQ.

mischman · 03-19-2017, 01:49 PM

New headlight bulbs! Yay for OEM HIDs!

ChaseZ · 03-19-2017, 02:44 PM

Quote:

Originally Posted by mischman

New headlight bulbs! Yay for OEM HIDs!

Need to get myself some of these so they match my DRL's which stay on with my headlights

03-18-2017, 08:39 PM	#9322 (permalink)
OTW Z-Boy A True Z Fanatic Join Date: Mar 2012 Location: Temecula Ca Posts: 1,225 Drives: 14 Nismo 370z #495 Rep Power: 750	You can always do that rubber washer trick that worked really well. Was in the "how to align the turtle" thread mishuko likes this. __________________ 2014: Nismo 370z #495 Magnetic Black - Stillen Gen3 CAI \| SPL F/R Camber Arms \| HKS Hypermax IV \| JDM Rear Fog Light \|GT-R Push Start Button \| Z1 2 Piece D/S \| Illuminated Kicks \| Tommykaira \| Work VS-XX BKB Step Lip +23/+13 19" 9.5/11 \| Fast Intentions RHFC TDX CBE 12" CF \| EcuTek

03-19-2017, 07:20 AM	#9323 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	yesterday I opened up fuel system; thinking I may have gotten bad gas/mixed some with water to ensure no ethanol. Just hasn't ran the same since last fill up & was actually sputtering & would not rev up...? No cel light & no way of watching data while driving right now. So checked all electrical connectors,vacuum,etc...all good. Gotta get a fuel pressure gauge;but it's running fine now. Sent from my iPhone using Tapatalk kenchan, Hotrodz and Fuzzzy like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

03-19-2017, 07:44 AM	#9324 (permalink)
chubbs A True Z Fanatic Join Date: Jan 2009 Location: Zeeland Posts: 1,046 Drives: 2016 370z Auto-Grey Rep Power: 7586	Did a black gloss vinyl roof wrap. Took me 3.5 hours. Happy with the result... kenchan, God-Speed, axmea? and 2 others like this. __________________ . '03 Grey >>> '06 Black >>>'10 Silver >>> '16 Grey ^

03-19-2017, 07:46 AM	#9325 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	dat black gloss looks good. but ur plants need cpr.. chubbs likes this.

03-19-2017, 11:27 AM	#9327 (permalink)
Stillen Base Member Join Date: Feb 2017 Location: Florida Posts: 11 Drives: 370z nismo stilllen Rep Power: 8	Supercharger impeller swap and clock down for Topgun Air 2 Air Here is the test on impeller https://www.facebook.com/AiltonLGuim...8841080886969/

03-19-2017, 11:35 AM	#9328 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	motored my Z.. had a good drive. car felt so slow at first especially since my other cars are turbo's with lots of torque. after a bit of spirited driving da ECU finally woke up and started putting out some real power out of da VQ.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM