What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

hustleman222 · 01-09-2017, 11:44 PM

I was taking my time wrapping my Stillen ceramic headers...overkill?

wolfcyn · 01-09-2017, 11:45 PM

Quote:

Originally Posted by hustleman222

I was taking my time wrapping my Stillen ceramic headers...overkill?

not at all

Sent from my iPhone using Tapatalk

EternalDragon · 01-10-2017, 12:40 AM

Good job!

Sent from my SM-G860P using Tapatalk

wolfcyn · 01-10-2017, 10:16 AM

Quote:

Originally Posted by Jayhovah

Hmm...That wasn't a big issue for me. Here is a couple of pics I snapped of it after it deformed our impact socket when we failed to break it loose with the impact wrench. The pictures themselves show I had clear line of sight... I wonder what is different with yours.

You can see in the pics the nut is already starting to round off... The extractor made the difference for us, but you definitely need to get it on there square.

this is my issue, my bolt is right between the steering column and that metal sticking out

Sent from my iPhone using Tapatalk

madeinjapan · 01-10-2017, 10:28 AM

Quote:

Originally Posted by wolfcyn

i couldnt get a snug fit on the top bolt because of the steering column.

Quote:

Originally Posted by hustleman222

You have to use a short socket on the end of 2 long extentions...I I was able to get to them, just not break them...the bottom one was my toughest...I broke a swivel on that one.

its all about socket size

too big and it will hit and not line up

Jayhovah · 01-10-2017, 10:50 AM

Quote:

Originally Posted by wolfcyn

this is my issue, my bolt is right between the steering column and that metal sticking out

Ahh, it certainly does look like you have less clearance than I did.

EDIT: Is it possible for your to access the fasteners on the steering shaft coupler from under the car? Or does the cat keep you from accessing? If you can get to them, you could remove that coupler to allow the shaft to move out of your way. Just make sure you set your wheels straight first and DO NOT MOVE THE STEERING WHEEL while the shaft is decoupled.

Here is a pic of the extensions, socket(extractor and adapter), and breaker bar we used:

And here is the style of bolt extractor we used (Irwin branded):

I hope this is of some help! I have no idea why Nissan didn't anti-seize that nut.

God-Speed · 01-10-2017, 12:32 PM

Quote:

Originally Posted by hustleman222

I was taking my time wrapping my Stillen ceramic headers...overkill?

Nicely Done!!!

hustleman222 · 01-10-2017, 01:05 PM

Shallow socket for the bolt...you can get it in there...mine looked the same way with the steering coupler. I tried with a deep socket and couldn't get it, swapped for a shallow and was able to put it on there.

hustleman222 · 01-10-2017, 01:28 PM

Now that I'm thinking about it...I think I used a 1/2 impact and long extention with a 1/2 to 3/8 adapter with a long 3/8 extention with the shallow socket...problem solved.

Knockoutpie · 01-10-2017, 01:30 PM

image.jpg

Started building my ported subwoofer box last night after work. Few more days to complete it.

hustleman222 · 01-10-2017, 01:34 PM

Where's the spare tire?

Ghostvette · 01-10-2017, 01:46 PM

Quote:

Originally Posted by Knockoutpie

Attachment 119188

Started building my ported subwoofer box last night after work. Few more days to complete it.

Quote:

Originally Posted by hustleman222

Where's the spare tire?

WE DON'T NEED NO STINKIN' SPARE!!!!!!!

Fix-a-flat.....

Knockoutpie · 01-10-2017, 02:05 PM

image.jpg

Guys wtf am I going to do with this amp! They said it was 10x10x1
Not 14x11x2

Jesus I have no idea where I'm going to put this.

JARblue · 01-10-2017, 02:05 PM

Quote:

Originally Posted by Ghostvette

WE DON'T NEED NO STINKIN' SPARE!!!!!!!

I made use of the spare tire about 30 minutes after driving my brand new Z off the dealer lot

That was March 2011. Almost 90K miles later, and I haven't used it since

Ghostvette · 01-10-2017, 02:11 PM

Quote:

Originally Posted by JARblue

I made use of the spare tire about 30 minutes after driving my brand new Z off the dealer lot

That was March 2011. Almost 90K miles later, and I haven't used it since

01-10-2017, 12:40 AM	#8898 (permalink)
EternalDragon Base Member Join Date: Sep 2016 Location: Orlando, FL Posts: 39 Drives: 16 Nissan 370z S M6 Rep Power: 9	Good job! Sent from my SM-G860P using Tapatalk __________________ "There is no greater danger than underestimating your opponent" - Laozi

01-10-2017, 01:05 PM	#8903 (permalink)
hustleman222 Enthusiast Member Join Date: Sep 2014 Location: Louisiana Age: 40 Posts: 250 Drives: 15 Nissan 370Z Nismo Rep Power: 3366	Shallow socket for the bolt...you can get it in there...mine looked the same way with the steering coupler. I tried with a deep socket and couldn't get it, swapped for a shallow and was able to put it on there. wolfcyn likes this. __________________ 316whp/262tq 12.38 @ 110mph on 3.91 gears 336whp/273tq Didn't push it hard enough. Turbo Time

01-10-2017, 01:28 PM	#8904 (permalink)
hustleman222 Enthusiast Member Join Date: Sep 2014 Location: Louisiana Age: 40 Posts: 250 Drives: 15 Nissan 370Z Nismo Rep Power: 3366	Now that I'm thinking about it...I think I used a 1/2 impact and long extention with a 1/2 to 3/8 adapter with a long 3/8 extention with the shallow socket...problem solved. wolfcyn likes this. __________________ 316whp/262tq 12.38 @ 110mph on 3.91 gears 336whp/273tq Didn't push it hard enough. Turbo Time

01-10-2017, 01:30 PM	#8905 (permalink)
Knockoutpie Base Member Join Date: Jun 2016 Location: Gilbert Arizona Posts: 93 Drives: 2013 370z Sport Rep Power: 9	image.jpg Started building my ported subwoofer box last night after work. Few more days to complete it. Jayhovah likes this.

01-10-2017, 01:34 PM	#8906 (permalink)
hustleman222 Enthusiast Member Join Date: Sep 2014 Location: Louisiana Age: 40 Posts: 250 Drives: 15 Nissan 370Z Nismo Rep Power: 3366	Where's the spare tire? __________________ 316whp/262tq 12.38 @ 110mph on 3.91 gears 336whp/273tq Didn't push it hard enough. Turbo Time

01-10-2017, 02:05 PM	#8908 (permalink)
Knockoutpie Base Member Join Date: Jun 2016 Location: Gilbert Arizona Posts: 93 Drives: 2013 370z Sport Rep Power: 9	image.jpg Guys wtf am I going to do with this amp! They said it was 10x10x1 Not 14x11x2 Jesus I have no idea where I'm going to put this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM