What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

DeliriousClam · 08-18-2016, 07:55 PM

Quote:

Originally Posted by kenchan

do it. sports car requires nice looking pedals.

Why's that? It's not like someone is going to shove their face in the footwell and go "WHAT THE ****"

kenchan · 08-18-2016, 08:05 PM

Quote:

Originally Posted by DeliriousClam

Why's that? It's not like someone is going to shove their face in the footwell and go "WHAT THE ****"

kenchan · 08-18-2016, 08:05 PM

if it dont bother u den okay. but my cars all have metal nice looking pedals to compliment the interior. u spent money on other bits, why halfarse the pedals?

madwi · 08-18-2016, 08:12 PM

Quote:

Originally Posted by DeliriousClam

Why's that? It's not like someone is going to shove their face in the footwell and go "WHAT THE ****"

If I was you, Id try out some gold pedals. Would be a good start on getting gold instead of red in the interior.

DeliriousClam · 08-18-2016, 08:15 PM

Quote:

Originally Posted by kenchan

if it dont bother u den okay. but my cars all have metal nice looking pedals to compliment the interior. u spent money on other bits, why halfarse the pedals?

Because they are a part that are not going to be seen 90% of the time.

ChaseZ · 08-18-2016, 09:26 PM

Quote:

Originally Posted by madwi

If I was you, Id try out some gold pedals. Would be a good start on getting gold instead of red in the interior.

I can totally see gold/red two-tone pedals in his interior. Tits!

ChopsZ · 08-18-2016, 10:03 PM

Quote:

Originally Posted by mishuko

Something that isn't mentioned in the DYI install is while it's still rigged you should loosen the clevis end before removing the stock assembly.

or you could do it my way and find out afterwards you should have done it first.... luckily I'm local to Ryan and gave him a shout and he recommended a screwdriver to help break loos the nuts.

Oh and if I had to install the RJM again... I'd rather pay someone else to do it. I'm pretty damn petite but I did not enjoy the contorting around even with two towels down and foam pad for the knees.

Anyways enjoy!!! my setting is 50% and I love it. Much smoother manual rev matching and smoother n-1 1-2 shifts with a lot less effort.

Being 6' 1" and 230 lbs, petite I am not, nor am I as flexible as I used to be. In short, I'm really not looking forward to installing this thing. But I'd rather take a couple hours (or more) and do it myself than pay someone to do it. At least, with me doing it, I know it's done right.

I'll definitely make note of your tips. Anything to make things go smoothly. Thanks!

JARblue · 08-18-2016, 10:14 PM

Quote:

Originally Posted by ChopsZ

Being 6' 1" and 230 lbs, petite I am not, nor am I as flexible as I used to be. In short, I'm really not looking forward to installing this thing. But I'd rather take a couple hours (or more) and do it myself than pay someone to do it. At least, with me doing it, I know it's done right.

I'll definitely make note of your tips. Anything to make things go smoothly. Thanks!

You are pretty much exactly my size. I've done four RJM clutch pedal installs now. Let me tell you the newest version is so much easier to install and adjust than the old one. You shouldn't have any troubles if you're at all mechanically inclined, but it's not exactly a fun install.

The best tip I have is to set up something next to the driver side that is just about door sill height (I use an old wooden file cabinet turned on its side - it is pretty sturdy). Add blankets and pillows to provide cushioning for you and to protect the car's paint. This will make it much more tolerable working on your back down in the footwell. If you start to feel cramped or are just uncomfortable, spend your time down there in short 5-10 min sessions. I found that the better the cushioning, the easier it is to spend longer periods down there.

DeliriousClam · 08-18-2016, 10:20 PM

Black/gold/carbon outside, black/red inside

JARblue · 08-18-2016, 10:20 PM

Brake fluid flush today

DeliriousClam · 08-18-2016, 10:28 PM

Quote:

Originally Posted by JARblue

Brake fluid flush today

I feel like this is something I should probably do

ChopsZ · 08-18-2016, 10:30 PM

Quote:

Originally Posted by JARblue

You are pretty much exactly my size. I've done four RJM clutch pedal installs now. Let me tell you the newest version is so much easier to install and adjust than the old one. You shouldn't have any troubles if you're at all mechanically inclined, but it's not exactly a fun install.

The best tip I have is to set up something next to the driver side that is just about door sill height (I use an old wooden file cabinet turned on its side - it is pretty sturdy). Add blankets and pillows to provide cushioning for you and to protect the car's paint. This will make it much more tolerable working on your back down in the footwell. If you start to feel cramped or are just uncomfortable, spend your time down there in short 5-10 min sessions. I found that the better the cushioning, the easier it is to spend longer periods down there.

Well if you want a fifth RJM install under your belt, come on over to FL and install mine. I'll buy you lunch and dinner! LOL

More great tips. Thanks! So no need to put the car up on ramps I guess. Sounds like that would make things more difficult.

JARblue · 08-18-2016, 10:32 PM

Today I also tried to tighten up my steering wheel tensioner per this thread: Something leaking at the steering rack The nut was covered in much more gunk than the OP's pic in that thread and quite loose. After about 3/4 turn it tightened up a bit. I gave it at least another 1/2 turn and a test drive, but I'm still not happy with the steering play. I have an appointment scheduled with the dealer tomorrow to look at it as well as the flashing airbag light on my dash.

Ventruck · 08-18-2016, 11:32 PM

Map lenses. Phone won't upload but most posters likely did this long ago.

They shouldn't be GT-R lenses but more of "WTF Nissan stop holding out".

madwi · 08-18-2016, 11:41 PM

Quote:

Originally Posted by ChopsZ

Well if you want a fifth RJM install under your belt, come on over to FL and install mine. I'll buy you lunch and dinner! LOL

More great tips. Thanks! So no need to put the car up on ramps I guess. Sounds like that would make things more difficult.

Don't be afraid to take the seat out to give you some room to turn wrenches.

08-18-2016, 08:05 PM	#8133 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	if it dont bother u den okay. but my cars all have metal nice looking pedals to compliment the interior. u spent money on other bits, why halfarse the pedals? mishuko likes this.

08-18-2016, 10:20 PM	#8139 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	Black/gold/carbon outside, black/red inside __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

08-18-2016, 10:32 PM	#8143 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Today I also tried to tighten up my steering wheel tensioner per this thread: Something leaking at the steering rack The nut was covered in much more gunk than the OP's pic in that thread and quite loose. After about 3/4 turn it tightened up a bit. I gave it at least another 1/2 turn and a test drive, but I'm still not happy with the steering play. I have an appointment scheduled with the dealer tomorrow to look at it as well as the flashing airbag light on my dash. ChaseZ likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM

08-18-2016, 11:32 PM	#8144 (permalink)
Ventruck Track Member Join Date: Jun 2016 Location: California Posts: 785 Drives: '13 Sport+Touring M6 Rep Power: 22898	Map lenses. Phone won't upload but most posters likely did this long ago. They shouldn't be GT-R lenses but more of "WTF Nissan stop holding out".