What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

JARblue · 05-26-2016, 04:29 PM

Nice work Mish. Did I see you won those in a raffle?

mishuko · 05-26-2016, 07:16 PM

Quote:

Originally Posted by Ghostvette

Looks good, mish..

Thanks! My fingers hurt from the pulling

Quote:

Originally Posted by Nixin

Happy to see you made it back safely.

Yep thanks for the concern! I opt to get a new tire

Quote:

Originally Posted by JARblue

Nice work Mish. Did I see you won those in a raffle?

Thanks! Lol no baught it. My waifu got a 350 clutch line and we gave it away

RN SHARK · 05-28-2016, 03:11 PM

So I installed the Z1 oil pan spacer. Have a problem...
I made the slippery sandwich of oil pan, grey RTV, spacer, grey RTV and was trying to line up the holes and needless to say, it slipped around a bit. BUT, I got it lined up and hand tightened the bolts. I let it sit for and hour, then tightened a little more to spec. I let this sit overnight, and about 15 hours later I filled with Redline oil. (A Mobil 1 oil filter was also changed out before the spacer was put on). Anyway, I went to start the car, which was on 4 jack stands and let it run for 10 minutes. I checked for leaks, there are none. I turn off the engine. So I get the car down and get in and was about to take it for a drive. I start the car and notice the low oil pressure light is on in the dash. I don't now if this was on during the 10 minutes I let it run because I was not in the car, I was underneath it checking for leaks.
Why is the low oil pressure light on?? Could it be that some of the RTV slid off while wet when I was trying to install it into the oil pan, dried, and is now blocking the pick-up screen? I also hope I didn't do any engine damage while it idled for 10 minutes. The engine sounds normal, no clunking noises or anything. So now I'm at the point where I am going to drain the oil out again through a screen filter, and redo the spacer installation. Ugh!!

DatsunFTW · 05-28-2016, 03:42 PM

Just doing more aero stuffs.
Adjustable AOT and easy canard removal to be test and tuned next month.

OTW Z-Boy · 05-28-2016, 07:21 PM

I hate black cars... 3 hour wash and detail.

Edit: I hate rust on rotors more

Memphis370Z · 05-28-2016, 07:35 PM

Quote:

Originally Posted by OTW Z-Boy

( Click to show/hide )

I hate black cars... 3 hour wash and detail.

Love/hate relationship, for sure, but totally worth it.

bflo370z · 05-28-2016, 07:43 PM

Finally took the car out for some spirited driving. Left Buffalo this morning at 9 for Pennsylvania. Just got back. Awesome roads. Wish I had a way to take pictures while driving the curvy roads because they were beautiful.

DeliriousClam · 05-28-2016, 08:18 PM

Started filling out the permit for nitrous oxide

Mr Chow · 05-28-2016, 08:54 PM

Installed iJDMTOY running, brake & backup light. Looks very cool.

While I was in the hatch area, covered the wheel wells, spare and cross brace with Noico 80 mil butyl sound dreading material. I did not have a way to measure before and after road noise. Subjectively the road noise is less bright or tinny. I like it.

axmea? · 05-29-2016, 01:36 AM

Headlights.

[IMG]

20160527_170030 by Raf, on Flickr[/IMG]

mishuko · 05-29-2016, 09:10 PM

I have the fog lights apparently...

DeliriousClam · 05-29-2016, 10:00 PM

This

RN SHARK · 05-29-2016, 10:47 PM

Broke my oil pump. This sucks...

Spooler · 05-29-2016, 11:26 PM

Quote:

Originally Posted by RN SHARK

Broke my oil pump. This sucks...

Ugg, not good. The 2nd oil pan has to come off along with the front of the engine. Timing chain and all. Hope you got the skills for it otherwise it is going to get expensive.

Don-MT · 05-29-2016, 11:55 PM

I just got home from a day trip to Yellowstone NP. All day with the top down. We saw lots of wildlife including two black bear. It's a good day!

05-26-2016, 04:29 PM	#7321 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Nice work Mish. Did I see you won those in a raffle? __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

05-28-2016, 03:11 PM	#7323 (permalink)
RN SHARK Track Member Join Date: Jun 2011 Location: Delafield, WI Age: 44 Posts: 618 Drives: 09 370Z, 14 SRT GC Rep Power: 35	So I installed the Z1 oil pan spacer. Have a problem... I made the slippery sandwich of oil pan, grey RTV, spacer, grey RTV and was trying to line up the holes and needless to say, it slipped around a bit. BUT, I got it lined up and hand tightened the bolts. I let it sit for and hour, then tightened a little more to spec. I let this sit overnight, and about 15 hours later I filled with Redline oil. (A Mobil 1 oil filter was also changed out before the spacer was put on). Anyway, I went to start the car, which was on 4 jack stands and let it run for 10 minutes. I checked for leaks, there are none. I turn off the engine. So I get the car down and get in and was about to take it for a drive. I start the car and notice the low oil pressure light is on in the dash. I don't now if this was on during the 10 minutes I let it run because I was not in the car, I was underneath it checking for leaks. Why is the low oil pressure light on?? Could it be that some of the RTV slid off while wet when I was trying to install it into the oil pan, dried, and is now blocking the pick-up screen? I also hope I didn't do any engine damage while it idled for 10 minutes. The engine sounds normal, no clunking noises or anything. So now I'm at the point where I am going to drain the oil out again through a screen filter, and redo the spacer installation. Ugh!! __________________ ___________ '09 6sp/Z1/PowerTrix/SPL/Swift/SRP/Whiteline/F.I.LTH&CBE/UpRev by Seb/CJM/Stillen/Ings+1/RJM/TrackSpec/Sparco/Motul/Wavetrac/Coolerworx/Verus/CraftSquare '14 SRT Grand Cherokee; '08 TL Type-S

05-28-2016, 03:42 PM	#7324 (permalink)
DatsunFTW A True Z Fanatic Join Date: Apr 2013 Location: Gainesville, FL Posts: 1,234 Drives: 12 370z A54 M6 Rep Power: 379	Just doing more aero stuffs. Adjustable AOT and easy canard removal to be test and tuned next month. edliaszenik and astro932 like this. __________________ The Build Last edited by DatsunFTW; 05-28-2016 at 03:45 PM.

05-28-2016, 07:21 PM	#7325 (permalink)
OTW Z-Boy A True Z Fanatic Join Date: Mar 2012 Location: Temecula Ca Posts: 1,225 Drives: 14 Nismo 370z #495 Rep Power: 750	What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY) I hate black cars... 3 hour wash and detail. Edit: I hate rust on rotors more TreeSemdyZee, cv129, Hotrodz and 5 others like this. __________________ 2014: Nismo 370z #495 Magnetic Black - Stillen Gen3 CAI \| SPL F/R Camber Arms \| HKS Hypermax IV \| JDM Rear Fog Light \|GT-R Push Start Button \| Z1 2 Piece D/S \| Illuminated Kicks \| Tommykaira \| Work VS-XX BKB Step Lip +23/+13 19" 9.5/11 \| Fast Intentions RHFC TDX CBE 12" CF \| EcuTek Last edited by OTW Z-Boy; 05-28-2016 at 07:35 PM.

05-28-2016, 07:43 PM	#7327 (permalink)
bflo370z Base Member Join Date: May 2014 Location: Buffalo NY Posts: 49 Drives: '12 Z and '07 g35x Rep Power: 11	Finally took the car out for some spirited driving. Left Buffalo this morning at 9 for Pennsylvania. Just got back. Awesome roads. Wish I had a way to take pictures while driving the curvy roads because they were beautiful. onzedge, OTW Z-Boy, Hotrodz and 5 others like this.

05-28-2016, 08:18 PM	#7328 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	Started filling out the permit for nitrous oxide __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

05-28-2016, 08:54 PM	#7329 (permalink)
Mr Chow Base Member Join Date: Oct 2015 Location: San Jose, CA Posts: 10 Drives: 14 BrSi 370z T/S/7A Rep Power: 10	Installed iJDMTOY running, brake & backup light. Looks very cool. While I was in the hatch area, covered the wheel wells, spare and cross brace with Noico 80 mil butyl sound dreading material. I did not have a way to measure before and after road noise. Subjectively the road noise is less bright or tinny. I like it.

05-29-2016, 01:36 AM	#7330 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,236 Drives: WELL ZED PW 6MT Rep Power: 53241	Today I tackled my....... Headlights. [IMG]20160527_170030 by Raf, on Flickr[/IMG] onzedge, Hotrodz, Ghostvette and 1 others like this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

05-29-2016, 10:00 PM	#7332 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	This TreeSemdyZee, Hotrodz, Ghostvette and 5 others like this. __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

05-29-2016, 11:55 PM	#7335 (permalink)
Don-MT Base Member Join Date: Sep 2015 Location: Montana Posts: 47 Drives: 73 240Z, 10 370Z-R Rep Power: 68	I just got home from a day trip to Yellowstone NP. All day with the top down. We saw lots of wildlife including two black bear. It's a good day! axmea?, Hotrodz and Wheels3309 like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM