What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

Wheels3309 · 05-06-2016, 10:48 AM

Quote:

Originally Posted by Leingod

I'm looking over the DIY for the install also. The spring compression is the only thing that worries me. I don't want myself or anyone loosing a finger haha. Your son sounds more competent then the 2 of us combined lol.

If you guys think it's doable between the 3 of us, i'm game. Cash? Beer? Taco Bell?

Yeah that was my only concern also... But renting that tool and having my son use it seems like the most logical thing to me... Doh!

Beer/tb/za... It's all good!

Quote:

Originally Posted by imjello

its easy just rent a spring compressor from autozone. Also if you can get your hands on a impact wrench it will cut the install time in half

Step 1: Rent tools
Step 2: Done

I agree on the spring compressor and my son has the impact tools... air compressor would be the issue tho

Leingod · 05-06-2016, 10:53 AM

Quote:

Originally Posted by Wheels3309

Yeah that was my only concern also... But renting that tool and having my son use it seems like the most logical thing to me... Doh!

Beer/tb/za... It's all good!

I agree on the spring compressor and my son has the impact tools... air compressor would be the issue tho

I forgot about pizza!!! Although, some Dinosaur BBQ would be good also...

I have a torque wrench! Doesn't help the air compressor, but still! haha. Btw, how bad was your exhaust install? Did the rubber hook bolt things give you any trouble? I need to drive out to Buffalo to pick my set up. Freaking killing me.

imjello · 05-06-2016, 11:09 AM

Quote:

Originally Posted by Leingod

I forgot about pizza!!! Although, some Dinosaur BBQ would be good also...

I have a torque wrench! Doesn't help the air compressor, but still! haha. Btw, how bad was your exhaust install? Did the rubber hook bolt things give you any trouble? I need to drive out to Buffalo to pick my set up. Freaking killing me.

there is a tool for the rubber hook bolt things also

https://www.youtube.com/watch?v=An1MPa2CwzY

Leingod · 05-06-2016, 11:48 AM

Quote:

Originally Posted by imjello

there is a tool for the rubber hook bolt things also

https://www.youtube.com/watch?v=An1MPa2CwzY

They make it look so easy.... Only took me 2 hrs to replace my clutch helper spring. Marred the sliding bolt thing because it was basically super glued into the 3 slotted holes. An hr of sanding and it finally slid back in.

Wheels, I am free next weekend if you'd really be game to help me out. I doubt we can cause to much damage. hahahaha

Wheels3309 · 05-06-2016, 06:00 PM

Quote:

Originally Posted by Leingod

I forgot about pizza!!! Although, some Dinosaur BBQ would be good also...

I have a torque wrench! Doesn't help the air compressor, but still! haha. Btw, how bad was your exhaust install? Did the rubber hook bolt things give you any trouble? I need to drive out to Buffalo to pick my set up. Freaking killing me.

Oh yeah! Dino is da sh!t

Exhaust was super easy... Worst was the rubber hangers but my son's got a trick with a pry bar and he gets em right out. I also only did axle back so it was really only 4 nuts.

Quote:

Originally Posted by Leingod

They make it look so easy.... Only took me 2 hrs to replace my clutch helper spring. Marred the sliding bolt thing because it was basically super glued into the 3 slotted holes. An hr of sanding and it finally slid back in.

Wheels, I am free next weekend if you'd really be game to help me out. I doubt we can cause to much damage. hahahaha

I think next weekend can work... Prolly Sat. is better.

You comin' here or am I go in' there?

Just PM me the details...

Silly Rabbit · 05-06-2016, 06:14 PM

Get it straight.

DeliriousClam · 05-06-2016, 07:01 PM

Saw it sitting in the body shop lot because it takes 6 days to refinish a Nismo wing. I guess I can't complain too much considering how much they're charging me for COMPLETELY refinishing it (entire coat of bondo, sand, primer, custom paint to match given sun exposure, and clear-coat)

jchammond · 05-07-2016, 06:46 PM

Put my Tread on today & retorqued all bolts underneath...got rear camber around -1.0* gonna get it on the rack this week & have it ck'd.
Toe eccentric bolts wouldn't allow me go anymore.
Rides & handles Great!

Sent from my iPhone using Tapatalk

mishuko · 05-07-2016, 07:36 PM

Shampoo my mats, cleaned the interior and glass. Testing different mount positions for the go pro this week.

Tomorrow's plan is to wash and wax

Zipper 104 · 05-07-2016, 10:42 PM

Got in the 1st wash since October. 104

P's_Z · 05-08-2016, 07:03 AM

Quote:

Originally Posted by jchammond

Correction on tires/ PSS tires got pushed out again on delivery date & my Daughter/me have plans to attend the 1/2 mile shootout race in Clatyton Ga.(wannagofast event) May 14,15 and then to Z1 on Monday 16th to have Z tuned....Picked up these Nitto 555 G2's, they are a bit heavy @ 27 & 32lbs., but may settle that back end down some.
Never thought it could get hectic finding 245/45 & 275/40ZR18's.

How are you liking the tires so far?

jchammond · 05-08-2016, 09:35 AM

Tire's are doing well P's Z, haven't logged many miles on them/but traction is much better than worn out GY's

jchammond · 05-08-2016, 11:35 AM

Anybody had this happen; this is R/R tire w/40 psi air,,,did one 15mph roll start & it hooked up....notice valve stem dot.

Sent from my iPhone using Tapatalk

Solidandre · 05-08-2016, 11:41 AM

Did my Gen 3 intakes today, man you guys weren't kidding with the tight fit. And then took it for a wash and ended up towel drying it with a towel that had polish on it LOL

barncobob · 05-08-2016, 01:18 PM

not sure whats going on there but looks like new tire, first few hundred miles no hard starts, tires need to get settled and move about and get that mounting fluid/lube dissipated.

05-06-2016, 06:14 PM	#7101 (permalink)
Silly Rabbit Track Member Join Date: Sep 2013 Location: Brookston, IN Age: 54 Posts: 683 Drives: '12 PW Touring Sport Rep Power: 619	Get it straight. onzedge, Ghostvette, Memphis370Z and 2 others like this. __________________ NISMO R Tune Intakes \ Fast Intentions RHFC \ Borla CBE \ EcuTek Tuned\ SPL Camber Arms \ Powertrix Coilovers \ Swift Springs \ Avant Garde \ Wicked CAS \ Morimoto XB Halos \ Custom Fenders \ Hotchkis Sways \ NLP Splitter

05-06-2016, 07:01 PM	#7102 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	Saw it sitting in the body shop lot because it takes 6 days to refinish a Nismo wing. I guess I can't complain too much considering how much they're charging me for COMPLETELY refinishing it (entire coat of bondo, sand, primer, custom paint to match given sun exposure, and clear-coat) __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

05-07-2016, 06:46 PM	#7103 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Put my Tread on today & retorqued all bolts underneath...got rear camber around -1.0* gonna get it on the rack this week & have it ck'd. Toe eccentric bolts wouldn't allow me go anymore. Rides & handles Great! Sent from my iPhone using Tapatalk onzedge, Hotrodz and Memphis370Z like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

05-07-2016, 07:36 PM	#7104 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9435	Shampoo my mats, cleaned the interior and glass. Testing different mount positions for the go pro this week. Tomorrow's plan is to wash and wax JARblue likes this.

05-08-2016, 09:35 AM	#7107 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Tire's are doing well P's Z, haven't logged many miles on them/but traction is much better than worn out GY's mishuko likes this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

05-08-2016, 11:35 AM	#7108 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Anybody had this happen; this is R/R tire w/40 psi air,,,did one 15mph roll start & it hooked up....notice valve stem dot. Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

05-08-2016, 01:18 PM	#7110 (permalink)
barncobob A True Z Fanatic Join Date: Sep 2015 Location: hangtown, CA Posts: 1,164 Drives: 16 370Z auto Rep Power: 590	not sure whats going on there but looks like new tire, first few hundred miles no hard starts, tires need to get settled and move about and get that mounting fluid/lube dissipated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM