What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

DeliriousClam · 05-02-2016, 12:18 PM

I'm debating on putting the inner fender fillers on. I replaced those ******** plastic "grills" with mesh and they blow straight through the inner fender opening..

Oh and **** anyone who says you need the Nismo license plate relocation kit. I re-used the one I had from my stock bumper

Z in the 6 · 05-02-2016, 12:31 PM

Was a couple days ago but finally swapped out the clutch assist spring for one recommended by a fellow member... wow what an improvement! So happy I did

Nixin · 05-02-2016, 02:25 PM

Quote:

Originally Posted by Z in the 6

Was a couple days ago but finally swapped out the clutch assist spring for one recommended by a fellow member... wow what an improvement! So happy I did

Was it a simple swap or was there more work involved than expected?

JesseG805 · 05-02-2016, 08:06 PM

Tried to install my berk HFCS. Removed everything except the drivers side top bolt that connects the header to the cat. Its stripped. Way to ruin my birthday lol.

Anyone recommend an exhaust shop around San Fernando or Simi valley besides specialty z or precision z? They're pretty damn booked for the next month or so.

Z in the 6 · 05-02-2016, 08:08 PM

Quote:

Originally Posted by Nixin

Was it a simple swap or was there more work involved than expected?

Wasn't a 10 minute job like suggested lol although it doesn't take more than 30 minutes but its soo much better

Spooler · 05-02-2016, 08:32 PM

I drove the new ride in a monsoon on the way home today. Previous owner never drove the car in the rain. She got broke in right. LOL I had a big time. The traction control light flickering at 78 mph in heavy rain will get your attention.

mishuko · 05-02-2016, 08:42 PM

got a new gopro mount to do on the back hatch... figuring out the angle/settings now.

also tearing apart my damn room to find the friggin remote. argh!!!

Quote:

Originally Posted by Spooler

I drove the new ride in a monsoon on the way home today. Previous owner never drove the car in the rain. She got broke in right. LOL I had a big time. The traction control light flickering at 78 mph in heavy rain will get your attention.

try doing it with vdc off

Spooler · 05-02-2016, 08:45 PM

Quote:

Originally Posted by mishuko

try doing it with vdc off

Not a problem, I have never had any nanny gadgets before. The car
wasn't even twitching in the rear when it kicked on.

DeliriousClam · 05-02-2016, 08:59 PM

I keep hearing about clutch helper springs.... Is there a thread somewhere that can fill me in on this?

Memphis370Z · 05-02-2016, 09:35 PM

Thanks to my very good friend, dragonbreath, we dropped my rear diff, swapped out the cover, put in some Redline, and installed Whiteline diff bushings.

On top of that, he tracked down a rattle that had been driving me crazy the past few months. Get this - my demon bolt had no nut on it, which I find ironic, since everyone seems to have trouble getting the damn thing off. Plus, there was a nut missing on the other HFC. No typical exhaust leak noise, so just kind of weird. It turned out that the bolts were too short to begin with.

Oh, and while my Z was up on jack stands, I noticed that I had a nail in my driver-side rear. Guess I will be putting my Discount Tire road warranty to use sooner than I had expected. Thankful I found this before driving to ZDayZ.

All in all, a great day spent away from work.

Memphis370Z · 05-02-2016, 09:50 PM

Quote:

Originally Posted by DeliriousClam

( Click to show/hide )

Very nice, Clam.

Hotrodz · 05-02-2016, 11:10 PM

Quote:

Originally Posted by DeliriousClam

I keep hearing about clutch helper springs.... Is there a thread somewhere that can fill me in on this?

The tread is in the engine section. I removed mine over two year ago and never looked back.

Sent from my SM-N910P using Tapatalk

mishuko · 05-03-2016, 07:23 AM

Quote:

Originally Posted by Spooler

Not a problem, I have never had any nanny gadgets before. The car
wasn't even twitching in the rear when it kicked on.

i drove through some torrential downpour with grooved roads with it off. was fine but damn there was huge pull and occasional horizontal slide.

Quote:

Originally Posted by DeliriousClam

I keep hearing about clutch helper springs.... Is there a thread somewhere that can fill me in on this?

there's a clip holding a pin in... get that off and then you can take out the springs. put back in housing. tada! there will be a bit of slack at the top though. i am hoping to get an RJM pedal this weekend maybe lol.

Quote:

Originally Posted by Hotrodz

The tread is in the engine section. I removed mine over two year ago and never looked back.

Sent from my SM-N910P using Tapatalk

i did it last year... not bad for a DIY

onzedge · 05-03-2016, 08:03 AM

Quote:

Originally Posted by DeliriousClam

mishuko · 05-03-2016, 04:50 PM

ordered a black rock kit... I'm going to get my oil analyzed after zdayz *nervous*

05-02-2016, 12:18 PM	#7066 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	I'm debating on putting the inner fender fillers on. I replaced those ****** plastic "grills" with mesh and they blow straight through the inner fender opening.. Oh and ** anyone who says you need the Nismo license plate relocation kit. I re-used the one I had from my stock bumper __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

05-02-2016, 08:32 PM	#7071 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,831 Drives: 2013 Nismo 370z Rep Power: 2684392	I drove the new ride in a monsoon on the way home today. Previous owner never drove the car in the rain. She got broke in right. LOL I had a big time. The traction control light flickering at 78 mph in heavy rain will get your attention. Hotrodz, Ghostvette and Memphis370Z like this.

05-02-2016, 08:59 PM	#7074 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	I keep hearing about clutch helper springs.... Is there a thread somewhere that can fill me in on this? __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

05-02-2016, 09:35 PM	#7075 (permalink)
Memphis370Z A True Z Fanatic Join Date: Sep 2014 Location: Memphis Area Posts: 3,117 Drives: '09 MB Rep Power: 124434	Thanks to my very good friend, dragonbreath, we dropped my rear diff, swapped out the cover, put in some Redline, and installed Whiteline diff bushings. On top of that, he tracked down a rattle that had been driving me crazy the past few months. Get this - my demon bolt had no nut on it, which I find ironic, since everyone seems to have trouble getting the damn thing off. Plus, there was a nut missing on the other HFC. No typical exhaust leak noise, so just kind of weird. It turned out that the bolts were too short to begin with. Oh, and while my Z was up on jack stands, I noticed that I had a nail in my driver-side rear. Guess I will be putting my Discount Tire road warranty to use sooner than I had expected. Thankful I found this before driving to ZDayZ. All in all, a great day spent away from work. Silly Rabbit and AV8rZ like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM

05-02-2016, 12:31 PM	#7067 (permalink)
Z in the 6 Base Member Join Date: Sep 2015 Location: Etobicoke"West Toronto" Posts: 99 Drives: 2016 370z Rep Power: 10	Was a couple days ago but finally swapped out the clutch assist spring for one recommended by a fellow member... wow what an improvement! So happy I did

05-02-2016, 08:06 PM	#7069 (permalink)
JesseG805 Base Member Join Date: Feb 2015 Location: Simi Valley, California Posts: 121 Drives: 12 370z 6mt Rep Power: 10	Tried to install my berk HFCS. Removed everything except the drivers side top bolt that connects the header to the cat. Its stripped. Way to ruin my birthday lol. Anyone recommend an exhaust shop around San Fernando or Simi valley besides specialty z or precision z? They're pretty damn booked for the next month or so.

05-03-2016, 04:50 PM	#7080 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9435	ordered a black rock kit... I'm going to get my oil analyzed after zdayz nervous