What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

berrydingle · 03-03-2016, 10:47 PM

Quote:

Originally Posted by D.Stillwell

Sweet. I've been looking at doing that as a quick and not expensive mod. How does the stock start button come out? Is it really that easy?

In other news I covered up Z again for the forcasted snow tonight. Then tomorrow it should be fine again...man am I ever tired of this March weather.

But I have been able to get thru winter just with a good cover and driving it in between all the storms, wash all the time to get salt off, and I did treat my underbody with 3M rust proof/sound deadener spray...

6 months of ownership, 11500k miles, oil change coming up (every 3k), bought with 6 miles =

Follow this instruction here!

GTR START BUTTON ANOTHER ALTERNATIVE WAY

D.Stillwell · 03-03-2016, 11:19 PM

Quote:

Originally Posted by berrydingle

Follow this instruction here!

GTR START BUTTON ANOTHER ALTERNATIVE WAY

Thanks brother! That looks quite easy indeed lol. Ordering the GTR button right now

felix0121 · 03-04-2016, 05:29 AM

Tested my new Ventus V12 EVO2 on freeway where it was pretty empty.

I found out that it slips often after 6,000 RPM.

Sent from my XT907 using Tapatalk

D.Stillwell · 03-04-2016, 06:40 AM

Quote:

Originally Posted by felix0121

Tested my new Ventus V12 EVO2 on freeway where it was pretty empty.

I found out that it slips often after 6,000 RPM.

Sent from my XT907 using Tapatalk

Yep, thats to be expected with that tread pattern and tire quality. I can buy a set for under 400 bucks.. My stock Bridgestones slip often after 6000 rpm lol..

I bet those hankook will slip much, much more.

mishuko · 03-04-2016, 09:44 AM

For some reason my shop was having trouble getting RBF 600? Wtf?

anyways found and sourced it... picking up a bottle for the csc/msc swap. I did notice the brake fluid was a bit lower. I'll ask them to top it up with the remainder.

tune deposit has also been confirmed! the tuner mentioned 2.5 hours give or take on average and explained it's a bit longer than uprev due to more customizability. weee!

mishuko · 03-04-2016, 09:50 AM

Quote:

Originally Posted by felix0121

Tested my new Ventus V12 EVO2 on freeway where it was pretty empty.

I found out that it slips often after 6,000 RPM.

Sent from my XT907 using Tapatalk

what are the temps? as it warms up they should get stickier...

felix0121 · 03-04-2016, 10:00 AM

Quote:

Originally Posted by mishuko

what are the temps? as it warms up they should get stickier...

I don't know. But for me it seemed to happen regardless of its temperature.

Sent from my XT907 using Tapatalk

Ghostvette · 03-04-2016, 10:23 AM

Quote:

Originally Posted by D.Stillwell

Thanks brother! That looks quite easy indeed lol. Ordering the GTR button right now

Check out the FI start button....

Ghostvette · 03-04-2016, 10:27 AM

Quote:

Originally Posted by mishuko

For some reason my shop was having trouble getting RBF 600? Wtf?

anyways found and sourced it... picking up a bottle for the csc/msc swap. I did notice the brake fluid was a bit lower. I'll ask them to top it up with the remainder.

Before you top off, replace the pads. If you top off and then replace pads, the excess has to go somewhere. Better to have new pads, then replace the brake fluid by flushing out through the bleed ports.

D.Stillwell · 03-04-2016, 10:30 AM

Quote:

Originally Posted by Ghostvette

Check out the FI start button....

Lol I've seen that one before. Its nice, but I think it fits a Nismo interior better and I prefer the GTR button.

Plus i'll save the extra 100 bucks in cost

Ghostvette · 03-04-2016, 11:13 AM

Quote:

Originally Posted by D.Stillwell

Lol I've seen that one before. Its nice, but I think it fits a Nismo interior better and I prefer the GTR button.

Plus i'll save the extra 100 bucks in cost

I've got the base interior and it looks pretty cool to me. I had a GTR button I just gave away on the freebies thread a couple of months ago, to someone I've not seen hide nor hair of since...

D.Stillwell · 03-04-2016, 11:18 AM

Quote:

Originally Posted by Ghostvette

I've got the base interior and it looks pretty cool to me. I had a GTR button I just gave away on the freebies thread a couple of months ago, to someone I've not seen hide nor hair of since...

Should've given it away to me. I'd give away something too like a Stillen oil cap or similar. Thats how I do, for your future reference lol...

So you think the FI button looks way better? What about some of the aftermarket ones that are just red/blue led? Opinions?

mishuko · 03-04-2016, 11:25 AM

Quote:

Originally Posted by felix0121

I don't know. But for me it seemed to happen regardless of its temperature.

Sent from my XT907 using Tapatalk

weird... even on stocks I never had spin in warm temps.

Quote:

Originally Posted by Ghostvette

Before you top off, replace the pads. If you top off and then replace pads, the excess has to go somewhere. Better to have new pads, then replace the brake fluid by flushing out through the bleed ports.

rotor/pads were replaced last year. it's a smidgen below the max kinda like where it was pre-replacement. probably had some air in the lines

Ghostvette · 03-04-2016, 11:52 AM

Quote:

Originally Posted by D.Stillwell

Should've given it away to me. I'd give away something too like a Stillen oil cap or similar. Thats how I do, for your future reference lol...

So you think the FI button looks way better? What about some of the aftermarket ones that are just red/blue led? Opinions?

I haven't seen any of the aftermarket ones, so I wouldn't have an opinion. I got the FI one primarily because the car is going to them early next year for TT , clutch and exhaust.

D.Stillwell · 03-04-2016, 12:19 PM

Quote:

Originally Posted by Ghostvette

I haven't seen any of the aftermarket ones, so I wouldn't have an opinion. I got the FI one primarily because the car is going to them early next year for TT , clutch and exhaust.

That makes sense, might as well get all FI stuff and complete the package.

Congrats! I'm excited for you!! Wish I had more money for my N/A build right now... oh well the future is bright, long live the Z!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM

03-04-2016, 05:29 AM	#6528 (permalink)
felix0121 Enthusiast Member Join Date: May 2012 Location: California Posts: 477 Drives: 2010 370Z Sport 7AT Rep Power: 67	Tested my new Ventus V12 EVO2 on freeway where it was pretty empty. I found out that it slips often after 6,000 RPM. Sent from my XT907 using Tapatalk

03-04-2016, 09:44 AM	#6530 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9435	For some reason my shop was having trouble getting RBF 600? Wtf? anyways found and sourced it... picking up a bottle for the csc/msc swap. I did notice the brake fluid was a bit lower. I'll ask them to top it up with the remainder. tune deposit has also been confirmed! the tuner mentioned 2.5 hours give or take on average and explained it's a bit longer than uprev due to more customizability. weee!