What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

kenchan · 10-10-2015, 08:45 PM

placed my z on flatstoppers. will psi up and cover tomorrow after motoring my G.

onzedge · 10-10-2015, 09:42 PM

Quote:

Originally Posted by kenchan

placed my z on flatstoppers. will psi up and cover tomorrow after motoring my G.

FairladyZ10PG · 10-11-2015, 12:42 AM

Did my regular oil change & while getting under the car I noticed a large chunk of fiberglass has broken off... 1/4" makes a lot of difference

Need to raise the front but will have to wait until next week

Z_ealot · 10-11-2015, 02:39 AM

Installed a 25 row setrab oil cooler today and holy crap what a difference in oil temps. Went from seeing temps regularly go up to 260 and above down to seeing max temps of 215 after an extended amount of spirited driving, loving it!

Spooler · 10-11-2015, 01:50 PM

Quote:

Originally Posted by Z_ealot

Installed a 25 row setrab oil cooler today and holy crap what a difference in oil temps. Went from seeing temps regularly go up to 260 and above down to seeing max temps of 215 after an extended amount of spirited driving, loving it!

Yeap, just installed the FI oil cooler kit for a 2012 or higher. I was always seeing temps of 220 with just normal driving. I am now at 180deg with a 34 row Setrab oil cooler during normal driving. Went on a 4 hr trip yesterday, oil temps stayed at 180-185. Super happy about it because it was an extended drive with speeds at 75 and up the whole way. Now I can stop starring at that dang gauge.

BoneZ · 10-11-2015, 01:56 PM

Quote:

Originally Posted by Spooler

Yeap, just installed the FI oil cooler kit for a 2012 or higher. I was always seeing temps of 220 with just normal driving. I am now at 180deg with a 34 row Setrab oil cooler during normal driving. Went on a 4 hr trip yesterday, oil temps stayed at 180-185. Super happy about it because it was an extended drive with speeds at 75 and up the whole way. Now I can stop starring at that dang gauge.

I've considered adding a cooler, but I worry a 34 row might overcool.

Memphis370Z · 10-11-2015, 02:05 PM

Quote:

Originally Posted by BoneZ

I've considered adding a cooler, but I worry a 34 row might overcool.

Then install a 25 row. That's what I run and it does fine in the summertime. Temps are usually around 180 driving normally. Or, if you install a 34 row, just block off part of the cooler in the wintertime, if need be.

Spooler · 10-11-2015, 02:22 PM

Quote:

Originally Posted by BoneZ

I've considered adding a cooler, but I worry a 34 row might overcool.

I got the Mocal thermostatic plate. 180 at the gauge is 200 coming out the motor to the cooler. It's cool outside for me right now. I don't worry about cool oil as much as I do overheated oil.

By the way, the FI kit removes the factory oil heater/cooler.

Z_ealot · 10-11-2015, 02:32 PM

Quote:

Originally Posted by Spooler

Yeap, just installed the FI oil cooler kit for a 2012 or higher. I was always seeing temps of 220 with just normal driving. I am now at 180deg with a 34 row Setrab oil cooler during normal driving. Went on a 4 hr trip yesterday, oil temps stayed at 180-185. Super happy about it because it was an extended drive with speeds at 75 and up the whole way. Now I can stop starring at that dang gauge.

Same for me except a little more extreme....i was seeing 240 and above with just regular driving and 260 in stop and go traffic....best investment ever

Memphis370Z · 10-11-2015, 02:36 PM

To Spooler's point, definitely get a kit with a thermostatic plate.

BoneZ · 10-11-2015, 03:26 PM

Quote:

Originally Posted by Memphis370Z

Then install a 25 row. That's what I run and it does fine in the summertime. Temps are usually around 180 driving normally. Or, if you install a 34 row, just block off part of the cooler in the wintertime, if need be.

What's it like in the winter with that 25?

TexasChuck · 10-11-2015, 04:59 PM

Just wondering? Everyday driving now. With the oil temp lower with the cooler, how does that effect the designed engine temp, in regards to combustion (gasoline burned fully), sensors, etc?
Thxs

Spooler · 10-11-2015, 05:59 PM

Quote:

Originally Posted by TexasChuck

Just wondering? Everyday driving now. With the oil temp lower with the cooler, how does that effect the designed engine temp, in regards to combustion (gasoline burned fully), sensors, etc?
Thxs

I see no difference.

Z_ealot · 10-11-2015, 06:02 PM

Quote:

Originally Posted by Memphis370Z

To Spooler's point, definitely get a kit with a thermostatic plate.

Got lucky on mine...it already came with one lol

Silly Rabbit · 10-11-2015, 06:15 PM

Backroad driving in Brown County with a IMIN (Indiana Modified Infinity Nissan). Nice weather, good roads and great people.

10-10-2015, 08:45 PM	#5611 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	placed my z on flatstoppers. will psi up and cover tomorrow after motoring my G. JARblue, Masterbeatty and P's_Z like this.

10-11-2015, 12:42 AM	#5613 (permalink)
FairladyZ10PG A True Z Fanatic Join Date: Aug 2010 Location: SoCal-IE Posts: 1,890 Drives: PGraphite m6 Rep Power: 255	Did my regular oil change & while getting under the car I noticed a large chunk of fiberglass has broken off... 1/4" makes a lot of difference Need to raise the front but will have to wait until next week __________________ ///MPPSK///M Performance FRONT SPLITTER///M Performance KIDNEY GRILLS///MPerformance CF MIRRORS///MPerformance CF SPOILER///AC SCHNITZER

10-11-2015, 02:39 AM	#5614 (permalink)
Z_ealot A True Z Fanatic Join Date: Sep 2010 Location: Albuquerque, NM Posts: 2,045 Drives: 09 370Z Touring/Sprt Rep Power: 10091	Installed a 25 row setrab oil cooler today and holy crap what a difference in oil temps. Went from seeing temps regularly go up to 260 and above down to seeing max temps of 215 after an extended amount of spirited driving, loving it! TechnicZ, Memphis370Z and marrawi like this.

10-11-2015, 04:59 PM	#5622 (permalink)
TexasChuck Track Member Join Date: Oct 2012 Location: SE Texas Posts: 556 Drives: 2014 Black Cherry Co Rep Power: 14	Oil Cooler? Just wondering? Everyday driving now. With the oil temp lower with the cooler, how does that effect the designed engine temp, in regards to combustion (gasoline burned fully), sensors, etc? Thxs

10-11-2015, 06:15 PM	#5625 (permalink)
Silly Rabbit Track Member Join Date: Sep 2013 Location: Brookston, IN Age: 54 Posts: 683 Drives: '12 PW Touring Sport Rep Power: 619	Backroad driving in Brown County with a IMIN (Indiana Modified Infinity Nissan). Nice weather, good roads and great people. blackcherry20, Masterbeatty, Ghostvette and 2 others like this. __________________ NISMO R Tune Intakes \ Fast Intentions RHFC \ Borla CBE \ EcuTek Tuned\ SPL Camber Arms \ Powertrix Coilovers \ Swift Springs \ Avant Garde \ Wicked CAS \ Morimoto XB Halos \ Custom Fenders \ Hotchkis Sways \ NLP Splitter

10-11-2015, 02:36 PM	#5620 (permalink)
Memphis370Z A True Z Fanatic Join Date: Sep 2014 Location: Memphis Area Posts: 3,117 Drives: '09 MB Rep Power: 124434	To Spooler's point, definitely get a kit with a thermostatic plate.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM