What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

JARblue · 07-21-2015, 09:55 AM

Quote:

Originally Posted by jpkirk

Mine still waits after autox last saturday. I have autox again this Saturday. I may take Friday off to spiff up the car, maybe change some fluids, trans and diff. I have a pressure bleeder, I should cycle out the brake and clutch fluid as well.

FWIW, I would not use the power bleeder on the clutch system (if you were planning to do so). I've used a power bleeder on the brake system three times now. Just keep it under 15 psi - usually 10-12 psi and a few pumps after each corner does it for me.

mishuko · 07-21-2015, 11:19 AM

Quote:

Originally Posted by JARblue

FWIW, I would not use the power bleeder on the clutch system (if you were planning to do so). I've used a power bleeder on the brake system three times now. Just keep it under 15 psi - usually 10-12 psi and a few pumps after each corner does it for me.

please elaborate why no use for clutch change?

jpkirk · 07-21-2015, 11:55 AM

Quote:

Originally Posted by mishuko

please elaborate why no use for clutch change?

I would imagine there is every probability of blowing the CSC piston out the end of the cylinder if the pressure is high enough.

jchammond · 07-21-2015, 06:18 PM

Oil change time,,,after it cools down a bit. ImageUploadedByTapatalk1437517071.943129.jpg still 102* outside.

Sent from my iPhone using Tapatalk

onzedge · 07-21-2015, 06:22 PM

Quote:

Originally Posted by jchammond

Oil change time,,,after it cools down a bit. Attachment 105886 still 102* outside.

Sent from my iPhone using Tapatalk

jchammond · 07-21-2015, 06:29 PM

ImageUploadedByTapatalk1437517693.996726.jpg am I OCD'ing or do other members do this with a sideways mounted oil filter?

Sent from my iPhone using Tapatalk

onzedge · 07-21-2015, 06:30 PM

Quote:

Originally Posted by jchammond

Attachment 105887 am I OCD'ing or do other members do this with a sideways mounted oil filter?

Sent from my iPhone using Tapatalk

Yes, that is an oil filter. Do not over-tighten.

jchammond · 07-21-2015, 06:30 PM

Pre-filled w/oil

Sent from my iPhone using Tapatalk

jchammond · 07-21-2015, 08:20 PM

ImageUploadedByTapatalk1437524351.637928.jpg 2 hours later; still 97*, oh well-gotta gitterdone!

Sent from my iPhone using Tapatalk

JARblue · 07-21-2015, 09:26 PM

Just finished up a photo shoot with Ms. Pint

Pics coming later

jchammond · 07-21-2015, 09:47 PM

ImageUploadedByTapatalk1437529563.517529.jpg just 2500 more miles & powertrain warranty will be gone!

dang,caught that 295/55/20 Trail Grappler M/T in the background,on my old 2door K1500 Blazer!
Sent from my iPhone using Tapatalk

P's_Z · 07-21-2015, 10:42 PM

Quote:

Originally Posted by jpkirk

Mine still waits after autox last saturday. I have autox again this Saturday. I may take Friday off to spiff up the car, maybe change some fluids, trans and diff. I have a pressure bleeder, I should cycle out the brake and clutch fluid as well.

Good luck on saturday

need4speed255 · 07-22-2015, 12:07 AM

Quote:

Originally Posted by jchammond

Pre-filled w/oil

Sent from my iPhone using Tapatalk

Yes you are OCD. No need to fill completely with oil because you are going to spill alot of it as soon as you tip it to install. Fill about one third or no more than half so that you don't spill while installing. This way you get some oil in the filter and also pre-soaking the filtering media. Make sure to put a slight film of oil on the gasket too.

jchammond · 07-22-2015, 05:36 AM

Quote:

Originally Posted by need4speed255

Yes you are OCD. No need to fill completely with oil because you are going to spill alot of it as soon as you tip it to install. Fill about one third or no more than half so that you don't spill while installing. This way you get some oil in the filter and also pre-soaking the filtering media. Make sure to put a slight film of oil on the gasket too.

undoubtly you haven't tried it-fill 1-2 hours prior to oil change/ you'll be amazed how little drips when you install....less than a teaspoon.

jchammond · 07-22-2015, 05:42 AM

ImageUploadedByTapatalk1437558100.556251.jpg about to back it off the ramps.

Sent from my iPhone using Tapatalk

07-21-2015, 06:18 PM	#4819 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Oil change time,,,after it cools down a bit. ImageUploadedByTapatalk1437517071.943129.jpg still 102* outside. Sent from my iPhone using Tapatalk P's_Z and carlitos_370z like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

07-21-2015, 06:29 PM	#4821 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	ImageUploadedByTapatalk1437517693.996726.jpg am I OCD'ing or do other members do this with a sideways mounted oil filter? Sent from my iPhone using Tapatalk GZ3 likes this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

07-21-2015, 06:30 PM	#4823 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Pre-filled w/oil Sent from my iPhone using Tapatalk carlitos_370z likes this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

07-21-2015, 08:20 PM	#4824 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	ImageUploadedByTapatalk1437524351.637928.jpg 2 hours later; still 97*, oh well-gotta gitterdone! Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

07-21-2015, 09:26 PM	#4825 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Just finished up a photo shoot with Ms. Pint Pics coming later jpkirk likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

07-21-2015, 09:47 PM	#4826 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	ImageUploadedByTapatalk1437529563.517529.jpg just 2500 more miles & powertrain warranty will be gone! dang,caught that 295/55/20 Trail Grappler M/T in the background,on my old 2door K1500 Blazer! Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html Last edited by jchammond; 07-22-2015 at 05:38 AM. Reason: seen something else

07-22-2015, 05:42 AM	#4830 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	ImageUploadedByTapatalk1437558100.556251.jpg about to back it off the ramps. Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM