What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

JARblue · 09-19-2014, 09:46 PM

Changed the oil. Noted blown rear differential bushing.

jlo370z · 09-19-2014, 11:24 PM

Quote:

Originally Posted by JARblue

Changed the oil. Noted blown rear differential bushing.

axmea? · 09-20-2014, 01:22 AM

Went to get my wheels balanced and noticed tread wear on the inner shoulders of both front tires. Looks like I have about two months left and will need to be replaced. ugh. I got 24k miles on them so far.

chops · 09-20-2014, 03:54 AM

Quote:

Originally Posted by OldFart

On this I did, putting coilovers on and figured why I was down there put the Nismo cover on and it just kinda snowballed from there. Suspension wise, the cars are extremely easy to work on. After I get this buttoned up, going to give it a go with painting the calipers in a candy tangerine over a gold base and replacing the brake lines - then I'm done.

yep. definitely easy to work on, but that diff takes quite a bit of work. its something i left to a shop for once. literally the only thing i havent DIY, at least for the bushing part haha. you shouldve tackled that while you had the diff out!

Quote:

Originally Posted by JARblue

Changed the oil. Noted blown rear differential bushing.

ouch. another one bites the dust. get the whitelines and call it a day. it honestly changed the entire feel of the car. acceleration is so much smoother and linear now.

Quote:

Originally Posted by axmea?

Went to get my wheels balanced and noticed tread wear on the inner shoulders of both front tires. Looks like I have about two months left and will need to be replaced. ugh. I got 24k miles on them so far.

i dont think ive gotten 24k out of any tires on this car haha

OldFart · 09-20-2014, 07:10 AM

Quote:

Originally Posted by chops

yep. definitely easy to work on, but that diff takes quite a bit of work. its something i left to a shop for once. literally the only thing i havent DIY, at least for the bushing part haha. you shouldve tackled that while you had the diff out!

I did replace the bushings while the differential was out - drilled, used a hacksaw blade, improvised and made a press to get the new one in. When I opened up my Whiteline package the front bottom two bushings were split and the on one the hole was too big for the sleeve, apparently Whiteline had a bad batch sometime in production. I don't drive the car hard but figured while I had it out might as well do it.

BTW - Still drool over the new seats you bought...

P's_Z · 09-20-2014, 07:12 AM

Quote:

Originally Posted by FairladyZ10PG

Driving to work every morning in my Z is the highlight of my day

Man, never get tired of sayin it, car looks amazing!

axmea? · 09-20-2014, 08:33 AM

Quote:

Originally Posted by chops

i dont think ive gotten 24k out of any tires on this car haha

Lol. Replaced oem at 17k with pss w/ conservative camber and glad it lasted this long.

JARblue · 09-20-2014, 08:58 AM

Quote:

Originally Posted by chops

yep. definitely easy to work on, but that diff takes quite a bit of work. its something i left to a shop for once. literally the only thing i havent DIY, at least for the bushing part haha. you shouldve tackled that while you had the diff out!

ouch. another one bites the dust. get the whitelines and call it a day. it honestly changed the entire feel of the car. acceleration is so much smoother and linear now.

i dont think ive gotten 24k out of any tires on this car haha

I have a call into the dealership on the off chance they might cover it under warranty at no cost to me. Otherwise it will be the whitelines and DIY. What makes you think it would be that difficult? Getting the bushing out might take a bit of effort, but I'm good at manhandling things

Quote:

Originally Posted by OldFart

I did replace the bushings while the differential was out - drilled, used a hacksaw blade, improvised and made a press to get the new one in. When I opened up my Whiteline package the front bottom two bushings were split and the on one the hole was too big for the sleeve, apparently Whiteline had a bad batch sometime in production. I don't drive the car hard but figured while I had it out might as well do it.

BTW - Still drool over the new seats you bought...

I guess I'll have to make doubly sure they check my bushings before sending them out. I assume Joe@ZSpeed will be my best option like usual? It's gotten to the point where if ZSpeed has the product, I just stopped looking at competitor pricing because I know they won't beat Joe

Pintsize725 · 09-20-2014, 02:03 PM

Drove down to the track to pick up my tickets for this evening. Hung around for an hour to check out some vendor booths and watch a few cars doing hot laps. Turned a few heads while leaving.

madwi · 09-20-2014, 02:08 PM

Quote:

Originally Posted by Pintsize725

Drove down to the track to pick up my tickets for this evening. Hung around for an hour to check out some vendor booths and watch a few cars doing hot laps. Turned a few heads while leaving.

Gadgetech · 09-20-2014, 04:05 PM

Added this little guy.

Sent from my Galaxy S5 Active

dichoi · 09-20-2014, 06:02 PM

Andrew traded his car in for a bike

aszyd · 09-20-2014, 07:13 PM

Test fit the new bumper.

Z1NONLY · 09-20-2014, 07:20 PM

Not today, but last week I had Berk HFC's and a Borla TD exhaust installed and then tuned.

I just filled out the custom shock re-valve paperwork for my old Koni's. They should go out the beginning of this week and come back in a few weeks as a custom coilover setup.

SlowRollin · 09-20-2014, 08:07 PM

I drove my Z across town to take a Bio course all morning and early afternoon, then drove home... got restless and went out for some fried chicken.

Are you suppose to mod your car daily, or is this more a what I did today thread? lol

09-19-2014, 09:46 PM	#1771 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Changed the oil. Noted blown rear differential bushing. DEpointfive0 likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

09-20-2014, 01:22 AM	#1773 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	Went to get my wheels balanced and noticed tread wear on the inner shoulders of both front tires. Looks like I have about two months left and will need to be replaced. ugh. I got 24k miles on them so far. jpkirk likes this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

09-20-2014, 02:03 PM	#1779 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211844	Drove down to the track to pick up my tickets for this evening. Hung around for an hour to check out some vendor booths and watch a few cars doing hot laps. Turned a few heads while leaving. onzedge, jpkirk, madwi and 1 others like this. __________________ Tracie

09-20-2014, 04:05 PM	#1781 (permalink)
Gadgetech A True Z Fanatic Join Date: Oct 2013 Location: Cumming, Ga Posts: 1,559 Drives: The Short Bus Rep Power: 870	Added this little guy. Sent from my Galaxy S5 Active Ghostvette likes this. __________________ Upstate Z Club

09-20-2014, 07:13 PM	#1783 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	Test fit the new bumper. onzedge, JARblue, Pintsize725 and 5 others like this. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

09-20-2014, 07:20 PM	#1784 (permalink)
Z1NONLY Enthusiast Member Join Date: May 2010 Location: SW Florida Posts: 355 Drives: 16 FR-S Rep Power: 40	Not today, but last week I had Berk HFC's and a Borla TD exhaust installed and then tuned. I just filled out the custom shock re-valve paperwork for my old Koni's. They should go out the beginning of this week and come back in a few weeks as a custom coilover setup. kenchan likes this.

09-20-2014, 08:07 PM	#1785 (permalink)
SlowRollin Base Member Join Date: Sep 2014 Location: Orlando Posts: 46 Drives: 14' 370z Tour/Sp AT Rep Power: 11	I drove my Z across town to take a Bio course all morning and early afternoon, then drove home... got restless and went out for some fried chicken. Are you suppose to mod your car daily, or is this more a what I did today thread? lol

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM