What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

kenchan · 07-31-2014, 03:02 PM

Quote:

Originally Posted by jpkirk

Did you do the DIY for the helpers? I thought I saw one on here somewhere.

i had posted pictures at one time, but something happened a few years back which pissed me off enough to delete them all.

so no, i dont have any picts.

on mine i took some scrap oak planks and made the extensions to cover
about 1/2 to 3/4 way up the rhino ramp with supports underneith.

the extensions are then screwed down to the rhino while in use. it's a very
effective extension all made by hand.... i dont have a power saw or sander.

jpkirk · 07-31-2014, 03:06 PM

Well, we will see how it goes tonight. I have the wood around to make it work.

brancky3 · 07-31-2014, 04:01 PM

Finished installing my Polk components (db6501) and Alpine power pack amp (KTP-445U) - so happy I ditched the stock speakers! This amp is seriously awesome too - fits behind the headunit and taps into the factory wiring for so you don't need to run a separate power cable (and puts out 90w RMS x 2 at that!)

cigarclifford · 07-31-2014, 04:23 PM

Quote:

Originally Posted by brancky3

Finished installing my Polk components (db6501) and Alpine power pack amp (KTP-445U) - so happy I ditched the stock speakers! This amp is seriously awesome too - fits behind the headunit and taps into the factory wiring for so you don't need to run a separate power cable (and puts out 90w RMS x 2 at that!)

Polk audio...............

kenchan · 07-31-2014, 04:25 PM

Quote:

Originally Posted by cigarclifford

Polk audio...............

polkaudio is good stuff. for the price 6501's are the best components out there imo as far as sound and ease of installation. i run them in my G.

cigarclifford · 07-31-2014, 04:30 PM

Quote:

Originally Posted by kenchan

polkaudio is good stuff. for the price 6501's are the best components out there imo as far as sound and ease of installation. i run them in my G.

Polk audio is my last step after almost 4 years of mods and improvements..

kenchan · 07-31-2014, 04:46 PM

Quote:

Originally Posted by cigarclifford

Polk audio is my last step after almost 4 years of mods and improvements..

oh... i c. i think you're going to like those speakers. if i ever decide to swap my Z's speakers out,
it will be the db6501's for sure. but ive been pretty happy with just the AVH-4500BT's eq and
processors.

cigarclifford · 07-31-2014, 04:54 PM

Quote:

Originally Posted by kenchan

oh... i c. i think you're going to like those speakers. if i ever decide to swap my Z's speakers out,
it will be the db6501's for sure. but ive been pretty happy with just the AVH-4500BT's eq and
processors.

I have been following this thread on the forum. It is a great place to
collect all the needed research and opinions before spending any money.

brancky3 · 07-31-2014, 05:08 PM

Quote:

Originally Posted by kenchan

oh... i c. i think you're going to like those speakers. if i ever decide to swap my Z's speakers out,
it will be the db6501's for sure. but ive been pretty happy with just the AVH-4500BT's eq and
processors.

I was going to go for the MM6501's but decided to go a bit cheaper. Maybe one day I'll upgrade, but with the stock headunit I don't know if I should go much further right now.

kenchan · 07-31-2014, 05:17 PM

Quote:

Originally Posted by brancky3

I was going to go for the MM6501's but decided to go a bit cheaper. Maybe one day I'll upgrade, but with the stock headunit I don't know if I should go much further right now.

i think you will be happier getting an aftermarket HU next vs getting better speakers for your stock radio.

kenchan · 07-31-2014, 05:18 PM

especially the pioneers have a real nice EQ...

brancky3 · 07-31-2014, 05:22 PM

Quote:

Originally Posted by kenchan

i think you will be happier getting an aftermarket HU next vs getting better speakers for your stock radio.

I truly hate the look of most aftermarket HUs, which is why I'm sticking with stock. Blaupunkt makes pretty OEM looking units for a really good price, just not high on my priority list :-)

kenchan · 07-31-2014, 05:24 PM

Quote:

Originally Posted by brancky3

I truly hate the look of most aftermarket HUs, which is why I'm sticking with stock. Blaupunkt makes pretty OEM looking units for a really good price, just not high on my priority list :-)

that's odd... my pioneer doubledin looks factory finish in my ride.

even the button illumination colors are set to amber/red to match.

and steering wheel controls work, so does rear view camera.

Bananaz · 07-31-2014, 05:32 PM

Damn that made me really want those RaceRamps..but I'd scrape way to hard LOL would have to extend with wood.. would make all fluid changed a breeze..diff, trans, engine..

kenchan · 07-31-2014, 05:32 PM

Quote:

Originally Posted by Bananaz

Damn that made me really want those RaceRamps..but I'd scrape way to hard LOL would have to extend with wood.. would make all fluid changed a breeze..diff, trans, engine..

there is a longer version of the 56 though with even less slope.

07-31-2014, 03:06 PM	#827 (permalink)
jpkirk A True Z Fanatic Join Date: Jun 2012 Location: Merry Land Posts: 5,515 Drives: '14 MidBlu ST MT Rep Power: 3376	Well, we will see how it goes tonight. I have the wood around to make it work. __________________ intake \| exhaust \| wheels \| tires \| suspension ... um ... stock, do speed stickers count? intake \| exhaust \| TE37 SL \| RE-11 \| suspension ... um ... do speed stickers count? Signature under construction

07-31-2014, 04:01 PM	#828 (permalink)
brancky3 Track Member Join Date: Jun 2014 Location: Greer, SC Age: 37 Posts: 754 Drives: 14 370Z Gun Metallic Rep Power: 16	Finished installing my Polk components (db6501) and Alpine power pack amp (KTP-445U) - so happy I ditched the stock speakers! This amp is seriously awesome too - fits behind the headunit and taps into the factory wiring for so you don't need to run a separate power cable (and puts out 90w RMS x 2 at that!) kenchan and cigarclifford like this. __________________ 2014 Nissan 370z Gun Metallic 6-spd Test Pipes \| Nismo CBE \| Stillen Gen3 \| Swift springs \| Advanation Sway Bars \| RJM Clutch \| GTR DBA Premium Wheels

07-31-2014, 05:32 PM	#839 (permalink)
Bananaz Track Member Join Date: Dec 2013 Location: Central Jersey Posts: 637 Drives: 09 370z 6MT/B+Sport Rep Power: 13	Damn that made me really want those RaceRamps..but I'd scrape way to hard LOL would have to extend with wood.. would make all fluid changed a breeze..diff, trans, engine.. __________________ BC - SSR - Evo-R - ViS - SPC - ZSpeed - Beluga - Blox - 35% Tint - Clutch Spring - Fang Forced Air Ducting

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM

07-31-2014, 05:18 PM	#836 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	especially the pioneers have a real nice EQ...